The main characteristics and usage methods of SICK sensors

Analysis of the factors that may cause the zero point change of the SICK sensor: overload will lead to a sudden change in the zero point, and the output resistance will obviously exceed the specified value impact, as above; Moisture return or turbidity, so it is mainly manifested as a continuous change of 0 point, high and low, etc., at this time, the ground resistance will be further reduced - in ...

Automobile is one of the pillar industries of the national economy, with the rapid development of China's automobile industry, the pursuit of higher detection speed is gradually reflected. The automobile steering shaft is an important part of the automobile power system, the upper part is fixedly connected with the steering wheel, and the lower part is connected with the steering gear; Its performance of ...

According to the measurement method, it can be divided into contact type and non-contact type 1。 The detection part of the contact: the contact temperature sensor is in good contact with the measured object, also known as the thermometer The thermometer achieves thermal equilibrium by conduction or convection, so that the indicated value of the thermometer can directly represent the ...

1. No weighing reading This kind of fault is generally more common, the weighing value of a certain scale is zero, regardless of whether there is something on the scale, its weighing value is always zero. There are several reasons for the above failure: a. the sensor is damaged, b. the line is open, c. the signal is ...

The Visionary-T Mini is a 3D snapshot camera based on TOF (Time-of-Flight) that outputs internally calibrated 2D grayscale images and 3D point cloud data at the same time, helping users reliably identify and locate objects in indoor and semi-outdoor environments. ...

1. If the electronic ruler has been used for a long time, and the seal has been aged, and there are many impurities mixed with it, and the water mixture and oil will seriously affect the contact resistance of the brush, which will make the displayed numbers keep jumping. At this time, it can be said that the electronic ...

1. Self-regulation. At the beginning of use, please check whether the switch itself is defective and whether the appearance is defective. 2. When avoiding obstructions. When the photoelectric switch is used, for some goods such as colored goods, goods with weak reflectivity, and goods with large gaps between small pieces...

The 13th Five-Year Plan for Highway Development proposes: "Promote scientific decision-making on maintenance. The scientific decision-making system for national and provincial highway maintenance has been basically established, the coverage rate of technical condition detection and automatic pavement collection has reached 100%, and the popularization rate of scientific decision-making technology has reached 80%. ” 　　The state vigorously promotes the national road ...

1. The pressure goes up, the output of the transmitter does not go up to this situation, you should first check whether the pressure interface is leaking or blocked, if you admit that it is not, check the wiring method and check the power supply, if the power supply is normal, then simply pressurize to see if the output changes, maybe observe whether the zero position of the sensor has an output, if there is no ...

(1) Since the inspection can be carried out in a non-contact manner, it does not wear or damage the object to be inspected. (2) Since the contactless output method is adopted, the life extension (except for the magnetic type) is made of semiconductors, and the life of the docking point is not affected. (3) It is not the same as the light detection method.

1. The color sensor, also known as the color sensor, is a machine that compares the color of the object with the reference color that has been taught earlier to detect the color. The standard color measurement method is to use a spectrophotometric colorimeter to measure the tristimulus value of the sample, so as to obtain the color of the sample.

Photoelectric sensors are controlled by converting changes in light intensity into changes in electrical signals. Photoelectric sensors are generally composed of three parts: light source, optical path and optoelectronic components. The measured change is converted into a change in the optical signal, and then the optoelectronic component is used to further ...

In this issue, we will delve into the technical details of the Safe EFI-pro System, and then we will share with you about the typical application scenarios of the Safe EFI-pro System. 1. What is Safe EFI-pro System? Safe EFI-pro: The new generation of SICK ...

1. At present, SICK pressure sensors can be used in combination with computers and instruments to improve operation and reduce errors. The human-machine dialogue function is the main feature of SICK pressure sensors, and the display device and input keyboard equipped with it become the medium for human-machine dialogue. 2. SICK pressure sensing ...

1. Linearity: refers to the degree to which the actual relationship curve between the output and input of the sensor deviates from the fitting straight line. Defined as the ratio of the maximum deviation between the actual characteristic curve and the fitted line over the full scale range to the full-scale output. 2. Sensitivity: Sensitivity is the sensor ...

Proximity sensors are divided according to their working principle: High-frequency oscillation type, capacitive type, induction bridge type, permanent magnet type, Hall effect type, etc. According to the principle of operation, it can be divided into three categories: High-frequency oscillation type using electromagnetic induction, magnetic force type using magnets, and ...

1. Laser length measurement Precision length measurement is one of the key technologies in the precision machinery manufacturing industry and the optical processing industry. Modern length measurement is mostly carried out by using the interference phenomenon of light waves, and its accuracy mainly depends on the monochromacy of light. Laser is the most ideal light source, it is more ...

Position monitoring of moving objects; Railway catenary survey, building limit survey; Measurement of objects that are not suitable for access; industrial automation and intelligent production management; Automobile speed and traffic statistics; Industrial monitoring signal trigger control; Tower crane ...

1. The signal cable of the sensor should not be arranged in parallel with the strong current power line or control line (for example, do not place the sensor signal line in the same pipe as the strong power line and the control line). IF THEY MUST BE PLACED IN PARALLEL, THEN THE DISTANCE BETWEEN THEM SHOULD BE KEPT AT LEAST 50CM, AND THE SIGNAL ...

1. There are many types of displacement sensors, and the measurement accuracy, service life, response frequency and applicable occasions of sensor products designed with different principles will be slightly different. Appropriate displacement sensor products should be selected according to the on-site installation and measurement requirements. 2. The measurement range of the displacement sensor is one ...