Introduction: Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can set the number of pulses or angle according to the requirements, and the speed, acceleration, deceleration and emergency deceleration of the internal position mode can be set
Features:
Mechanical resonance frequency analysis, equipped with two sets of notch filters, adjustable frequency (50-5000Hz) and notch depth, effectively overcome low-frequency resonance and vibration at the end of the machine, vibration frequency (1-100Hz) and vibration damping can be set
The friction torque compensation function can reduce the influence of static friction during mechanical commutation and improve the command following performance of low-speed operation
Debugging software support, can be mechanical characteristics analysis, parameter setting, monitoring and other functions, intuitive and simple operation.
Product parameters
Supply voltage: single-phase or three-phase 220VAC (-15-+10%), 50-60Hz
Output: 380V (2kW, 3.5kW, 5kW, 7.5kW)
Encoders: 2500-line incremental/wire-saving encoders, 17bit/20bit/23bit absolute encoders
Digital IO signal: 8 channel input and 6 channel output can be set functionally
Analog signal: 2 inputs
COMMUNICATION: RS232, STANDARD MODBUS PROTOCOL, CANOPEN BUS, SUPPORT MII PROTOCOL
Monitoring function: Provides 16 status monitoring such as position, speed, current, voltage, input and output
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the new Shida/STEP universal bus type 380V servo iKBS series products, if you are interested in the new Shida/STEP servo, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
New Time/STEP servo motor 130ST series rated speed 1500rpm
Introduction: New Time/STEP servo motor 130ST series, servo motor, AC servo motor, permanent magnet AC servo motor
Specifications
Power range: 1.8kW-2.3kW
Input Voltage: 220VAC (-15-+10%), 50-60Hz
Forehead...
|
|
The communication rate of the servo Ωs-AN1 of the universal bus type of STEP is 100Mbps
Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.
|
|
Xinshida/STEP universal pulse type servo Ωs-AP2 single-phase AC220V
Introduction: Xinshida/STEP universal pulse servo Ωs-AP2 provides customers with a variety of Calling zero return modes to adapt to the zero return needs of different sites, and also provides 64 points of I/O point control function, which is suitable for customers to pass through different I/O without providing pulse control.
|
|
Xinshida/STEP universal servo k2 series 2 inputs
Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.
|
|
New Time/STEP servo motor 60B series quota power 200W-400W
Introduction: New Time/STEP servo motor 60B series, servo motor, AC servo motor, permanent magnet AC servo motor
Specifications
Rated power: 200W-400W
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated...
|
|
Xinshida/STEP servo motor 80E encoder line number 2500 lines
Introduction: Xinshida/STEP servo motor 80E
Product parameters
Rated power: 0.4kW——1kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 2A-4.4A
Rated speed: 2000rpm ...
|
|
The power range of the iK3 series of universal bus servo is 50W~5kW
Introduction: The iK3 series of servo iK3 series has a current loop frequency response of 2.5kHz, a speed loop frequency response of 1.6kHz, and a communication rate of 100Mbps. With a variety of subtraction filters to improve control stability, support speed curve planning, accelerate and deceleration settings and accelerate and deceleration rounds.
|
|
New Time/STEP servo motor 130ST 2000rpm
Introduction: New Time/STEP servo motor 130ST incremental/optional** value, permanent magnet AC servo motor
Specifications
Power range: 1.8kW – 2.8kW
Input Voltage: 220VAC (-15-+10%), 50-60Hz
Rated current: 9 ...
|
|
New Time Reach/STEP universal bus type 380V servo KBS series output power 380V
Introduction: The powerful internal position mode of the 380V servo KBS series of universal bus type can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, and each set of data can set the number of pulses or angles according to needs, and can ...
|
|
STEP Universal Pulse Servo G Series 2 inputs
Introduction: New Time/STEP universal pulse type servo G series
Product features:
The new digital signal processor (DSP) and intelligent power module (IPM) control algorithm are used to realize the high-precision control of permanent magnet synchronous motors.
Intelligent PID control algorithm and PD...
|
|
Xinshida/STEP universal pulse servo G2 series output power 0.4kW
Introduction: Xinshida/STEP universal pulse servo G2 series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor; The combination of the intelligent PID control algorithm and the PDFF controller improves the position ...
|
|
STEP multi-axis servo K1AD series with a power of 0.75kW
Introduction: New Time/STEP multi-axis servo K1AD series mechanical resonance frequency analysis, equipped with two sets of notch filters, adjustable frequency (50-5000Hz) and notch depth, ** to overcome low-frequency resonance and mechanical end vibration, vibration frequency (1-100Hz) and vibration damping can be set.
...
|
|
Xinshida/STEP servo motor 60S3S with a maximum speed of 6000rpm
Introduction: Xinshida/STEP servo motor 60S3S
Product parameters
Rated power: 200W——600W
Rated voltage: 220VAC (-15-+10%), 50-60HZ
Rated torque: 0.64N.m——1.91N.m
Maximum torque: 1.92 ...
|
|
New Time/STEP servo motor 130E
Introduction: STEP servo motor 130E
Specifications
Rated power: 1kW-5kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated Line Current: 5A -27.9A
Rated speed: 1500-3 ...
|
|
New Time Reach/STEP DDR motor servo drive QXR
Introduction: XINSHIDA/STEP DDR motor servo driver QXR The high-performance pulsed DDR motor servo driver of the new time QXR series integrates the world's cutting-edge servo control technology, and its excellent drive performance has reached the highest level.
Product features:
Scaling performance is excellent ...
|
|
The new time/STEP servo motor 60ST is rated at 3000rpm
Introduction: New Time/STEP servo motor 60ST
Specifications
Power range: 200W-600W
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated Line Current: 1.2A-3.5A
Rated speed: 3000rpm
...
|
|
New Time/STEP servo motor 180B current 9~19A
Introduction: New Time/STEP servo motor 180B, photoelectric pulse encoder/value encoder/resolver
Specifications
Rated power: 2.9kW-7.5kW
Rated line voltage: 3-phase 380VAC (-15-+10%), 50-60Hz
Forehead...
|
|
New Time/STEP servo motor 130SD rated power 1kW-3kW
Introduction: New Time/STEP Servo Motor 130SD Servo Motor, AC Servo Motor, Permanent Magnet AC Servo Motor
Specifications
Rated power: 1kW-3kW
Pole logarithms: 5
Rated torque: 4.77N.m-14.3N.m
** High torque: ...
|
|
Xinshida/STEP universal pulse servo G2
Introduction: Xinshida/STEP universal pulse servo G2 adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm to achieve high-precision control of permanent magnet synchronous motor;
Features:
Adoption of a new digital signal processor (DS ...
|
|
The New Time/STEP Motion Controller AMC1600C-A06 has a capacity of 512MB
Introduction: New Time/STEP motion controller AMC1600C-A06, special machine motion controller; Developed based on CoDeSys platform, fully support IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, EthernetIP and other industrial fieldbus protocols...
|
|
Contact
working hours
