Introduction: The powerful internal position mode of the new Shida/STEP universal bus servo iK2 series can plan multi-path continuous operation to achieve rich motion control functions; It supports up to 32 sets of data planning, and each set of data can set the number of pulses or angles according to the requirements, and the speed, acceleration, deceleration and emergency deceleration of the internal position mode can be set
Features:
CNC collar special servo:
The standard Mechatrolinkll and Mechatrolink III buses are perfectly adapted to the CNC systems such as Baoyuan, Xindai, and Edraw
Kalman observer algorithm for faster servo response
Load disturbance compensation algorithm for smoother processing
Quadrant bump suppression algorithm makes the processing more refined
Equipped with turret control function
Stable operation:
Mechanical resonance frequency analysis, equipped with two sets of notch filters, adjustable frequency (50-5000Hz) and notch depth, effectively overcome low-frequency resonance and vibration at the end of the machine, vibration frequency (1-100Hz) and vibration damping can be set
The friction torque compensation function can reduce the influence of static friction during mechanical commutation and improve the command following performance of low-speed operation
Product parameters
Supply voltage: 220VAC (-15-+10%), 50-60HZ
Output: 1 0.4kW - 7.5kW
Encoder: 17bit/20bit/23bit absolute encoder
Digital IO signal: 8 channel input and 6 channel output can be set functionally
Analog signal: 3 inputs±10V; Switch according to the control mode
COMMUNICATION METHODS: MECHATROLINK-II, MECHATROLINK-III
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
This article introduces the new Shida/STEP universal bus servo iK2 series voltage 220VAC products, if you are interested in the new Shida/STEP servo, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Xinshida/STEP universal bus servo iK3 series power range 50W~5kW
Introduction: Xinshida/STEP universal bus servo iK3 series current loop frequency response 2.5kHz, speed loop frequency response 1.6kHz, communication rate 100Mbps. With a variety of filter reducers to improve control stability, support speed curve planning, acceleration and deceleration settings and acceleration and deceleration fillet ...
|
|
Xinshida/STEP servo 60ST rated speed 3000rpm
Introduction: Xinshida/STEP servo 60ST
Product parameters
Power range: 200W-600W
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 1.2A——3.5A
Rated speed: 3000rpm
...
|
|
Xinshida/STEP servo motor 130ST series rated speed 1500rpm
Introduction: Xinshida/STEP servo motor 130ST series, servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Power range: 1.8kW - 2.3kW
Input voltage: 220VAC (-15-+10%), 50-60Hz
Forehead...
|
|
Xinshida/STEP servo drive QXL I/O10 in and out of 9
Introduction: The new STEP servo drive QXL integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international level. Excellent extensibility, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit improvement...
|
|
Xinshida/STEP servo motor 80E encoder line number 2500 lines
Introduction: Xinshida/STEP servo motor 80E
Product parameters
Rated power: 0.4kW——1kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 2A-4.4A
Rated speed: 2000rpm ...
|
|
Xinshida/STEP PCI 6-axis motion control card ADT-8960 has a maximum pulse frequency of 2MHz
Introduction: The ADT-8960 is one of the members of the 12-axis motion control card based on the computer PCI bus, one system can support up to 16 control cards, can control 96 servo/stepper motors, plug and play. Mainly used in multi-axis ...
|
|
Xinshida/STEP Motion Controller SC30-B6L RAM capacity 1G
Introduction: Xinshida/STEP motion controller SC30-B6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...
|
|
Xinshida/STEP universal servo k2 series 2 inputs
Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.
|
|
Xinshida/STEP servo motor 60S2S rated speed 3000rpm
Introduction: Xinshida/STEP servo motor 60S2S
Product parameters
Power range: 200W-400W
Input voltage: AC - 220V
Rated torque: 0.64N.m——1.27N.m
Encoder Type: 2500 Line Incremental/Wire Saving Encoder, ...
|
|
Xinshida/STEP servo motor 110ST rated speed 2000rpm
Introduction: Xinshida/STEP servo motor 110ST servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Power range: 0.88kW - 1.6kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated...
|
|
Xinshida/STEP universal bus type servo Ωs-AN1 communication rate 100Mbps
Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.
|
|
Xinshida/STEP high-end bus type servo E series communication rate 100Mbps
Introduction: Xinshida/STEP high-end bus servo E series end jitter suppression function, friction compensation function, motor cogging torque compensation function, with self-tuning function and with a variety of vibration damping filters. Support the host PC software for parameter setting (upload, download, reset, guide...
|
|
Xinshida/STEP universal bus type 380V servo KBS series output power 380V
Introduction: Xinshida/STEP universal bus type 380V servo KBS series powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can ...
|
|
Xinshida/STEP servo motor 80SD
Introduction: Xinshida/STEP servo motor 80SD
Product parameters
Rated power: 750W——1000W
Number of pole pairs: 5
Rated torque: 2.39N.m——3.18N.m
**Large torque: 7.2N.m——9.54N.m
Rated speed: 3000 ...
|
|
Xinshida/STEP universal pulse type AC servo drive Ω6
Introduction: Xinshida/STEP universal pulse type AC servo drive Ω6
Features:
Self-tuning, free debugging, saving 90% of equipment debugging time;
Speed loop bandwidth: 3.5kHz;
Current loop refresh rate 1MHz;
Three 16-bit analog command inputs can ...
|
|
The AS610 inverter is rated at ≥ 0.93
Introduction: Xinshida/STEP inverter AS610
Features:
High reliability design
Reliable thermal design
High seismic resistance
High degree of protection
Ultra-low noise operation design
It has a DC input anti-reverse circuit design
Advanced...
|
|
Xinshida/STEP servo motor 220ST encoder line number 2500 lines
Introduction: Xinshida/STEP servo motor 220ST rated torque: 67N.m——95.5N.m
Product parameters
Power range: 7kw - 11kw
Quota line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 31.3A— ...
|
|
Xinshida/STEP universal bus type servo Ωs-AP1 02kW drive power
Introduction: Xinshida/STEP universal bus servo Ωs-AP1 can cover servo motors with a power of 0.2kW - 7.7kW. Pulse control, up to 4MPulse/s high-speed pulse input interface (differential signal), up to 500KPulse/s low-speed pulse input interface (optocoupler circuit); ...
|
|
Xinshida/STEP servo motor 100B
Introduction: Xinshida/STEP servo motor 100B
Product parameters
Rated power: 1.0kW - 2.0kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 5.0A——9.9A
Rated speed: 3000rp ...
|
|
Xinshida/STEP high-order pulse servo drive K5 series position control mode
Introduction: Xinshida/STEP high-order pulse servo drive K5 series uses the best motor control algorithm to achieve faster system response, with a current loop frequency response of 2.5kHz, a speed loop frequency response of 1.6kHz, and a communication rate of 100Mbps. In the actual operation state, the adaptive filter ...
|
|
Contact
working hours
