Xinshida/STEP servo motor 220ST encoder line number 2500 lines

Introduction: Xinshida/STEP servo motor 60SS/60SD general-purpose S series servo motor servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 200W——400W Number of pole pairs: 5 Rated torque: 0.64N.m— ...

Introduction: Xinshida/STEP universal bus servo Ωs-EN1 can cover servo motors with a power of 0.2kW-22kW. Support EtherCAT, PowerLink, CANOpen bus communication, communication rate 100Mbps; Precise position, speed, torque control and superior control

Introduction: Xinshida/STEP inverter AS610 Features: High reliability design Reliable thermal design High seismic resistance High degree of protection Ultra-low noise operation design It has a DC input anti-reverse circuit design Advanced...

Introduction: The powerful internal position mode of the new Shida/STEP multi-axis servo KAD series can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can set the internal ...

Introduction: Xinshida/STEP servo motor 60S3S Product parameters Rated power: 200W——600W Rated voltage: 220VAC (-15-+10%), 50-60HZ Rated torque: 0.64N.m——1.91N.m Maximum torque: 1.92 ...

Introduction: The powerful internal position mode of the new Shida/STEP universal bus servo iK2 series can plan multi-path continuous operation to achieve rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the number of pulses or angles, and the amount can be set ...

Introduction: Xinshida/STEP universal pulse servo G3 series high-precision position clamping function, after the driver detects that the specified position has been reached, the command is output through the IO port. The infinite operation absolute function allows the encoder to clear the number of turns by a pre-set upper limit. Give birth...

Introduction: Xinshida/STEP Motion Controller AMC1600C-A06, special aircraft motion controller; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, EthernetIP and other industrial fieldbus protocols ...

Introduction: Xinshida/STEP servo motor 110ST Product parameters Power range: 1.3kW - 1.7kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 6.5A——9.5A Rated speed: 2500 ...

Introduction: Xinshida/STEP servo motor 60B series, servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 200W——400W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated...

Introduction: Xinshida/STEP servo motor 180B, photoelectric pulse encoder/absolute encoder/resolver Product parameters Rated power: 2.9kW - 7.5kW Rated line voltage: three-phase 380VAC (-15-+10%), 50-60Hz Forehead...

Introduction: The QX-B2 is a compact all-digital intelligent servo drive based on the latest DSP technology, which is developed with advanced digital signal processing technology and has high overall efficiency. Not only can traditional high-performance Space Vector (FOC) algorithms be used, ...

Introduction: Xinshida/STEP servo motor 180ST Product parameters Power range: 2.7kW - 4.5kW Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz Rated line current: 10.5A——16A (220V A ...

Introduction: Xinshida/STEP servo motor 130ST Product parameters Power range: 1.3kW - 2.4kW Input voltage: 220VAC (-15-+10%), 50-60Hz Rated current: 7.0A——12A Rated torque: 4.2N.m— ...

Introduction: Xinshida/STEP multi-axis servo Ωm-N1 is a multi-axis product launched by Sigriner, including rectifier unit (AC200V), three-axis integrated and four-axis integrated drive unit (DC300V). The rectifier unit and drive unit can be flexibly configured. The system adopts EtherCAT bus communication, supporting ...

Introduction: Xinshida/STEP motion controller SC30-B6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...

Introduction: Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can be set according to the number of pulses or angles, and the speed, acceleration, and deceleration of the internal position mode can be set.

Introduction: Xinshida/STEP universal pulse servo G series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor, intelligent PID control algorithm and PDFF controller combined, improve the position and ...

Introduction: Xinshida/STEP universal pulse servo G2 series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor; The combination of the intelligent PID control algorithm and the PDFF controller improves the position ...

Introduction: Xinshida/STEP integrated all-in-one servo SS series adopts 32768 high-resolution encoder, the position control is more accurate, within 3000rpm, and the rated torque output can be guaranteed at any speed. Features: Compared with ordinary AC servo: Below 36V ...