Introduction: Xinshida/STEP universal pulse servo G2 adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm to achieve high-precision control of permanent magnet synchronous motor;
Features:
The new digital signal processor (DSP) and intelligent power module (IPM) and advanced control algorithm are used to realize the high-precision control of the permanent magnet synchronous motor;
The combination of intelligent PID control algorithm and PDFF controller improves the speed and accuracy of position and speed control.
Support encoder signal arbitrary crossover ratio setting;
It supports load disturbance observer, which can be fed forward for torque compensation, which improves the dynamic response of the system.
Inertia recognition and auto-gain functions simplify the system commissioning process;
Debugging software support, mechanical characteristics analysis, parameter setting, monitoring and other functions, intuitive and simple operation;
Product parameters
Supply voltage: 220VAC (-15-+10%), 50-60Hz
Output: 0.4 kW, 0.75 kW, 1.5 kW, 2.2 kW
Encoder: 2500-line incremental/wire-saving encoder, 1024-line resolver
Digital IO signal: 8 channels input and 4 channels output
Analog signal: 2 inputs
Communication mode: RS232 custom protocol, RS485 standard Modbus protocol, CAN custom protocol
This article introduces the new Shida/STEP universal pulse type servo G2 products, if you are interested in the new Shida/STEP servo, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business
|
More on that
|
Xinshida/STEP servo motor 220ST encoder line number 2500 lines
Introduction: Xinshida/STEP servo motor 220ST rated torque: 67N.m——95.5N.m
Product parameters
Power range: 7kw - 11kw
Quota line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 31.3A— ...
|
|
Xinshida/STEP universal bus type 380V servo iKBS series 2500 line incremental encoder
Introduction: Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can be set according to the number of pulses or angles, and the speed, acceleration, and deceleration of the internal position mode can be set.
|
|
Xinshida/STEP servo motor 130B rated speed 1500rpm
Introduction: Xinshida/STEP servo motor 130B
Product parameters
Rated power: 0.85kW - 1.8kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 6.9A——15A
Rated speed: 1500r ...
|
|
Xinshida/STEP servo drive QXL I/O10 in and out of 9
Introduction: The new STEP servo drive QXL integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international level. Excellent extensibility, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit improvement...
|
|
Xinshida/STEP servo motor 110B rated speed 2000rpm
Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Rated power: 0.4kW - 1.2kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 2. ...
|
|
The new STEP/STEP bus type high-performance servo drive QXE has a built-in PLC
Introduction: Zhongweixing QXE series bus type high-performance servo drive, integrated with the world's cutting-edge servo control technology, its excellent driving performance has reached the international leading level. Excellent scalability, fast response, precise positioning, vibration suppression, automatic parameter design, programmability, operation ...
|
|
Xinshida/STEP Motion Controller SC30-B6L RAM capacity 1G
Introduction: Xinshida/STEP motion controller SC30-B6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...
|
|
Xinshida/STEP universal servo K1 series 2-way input
Introduction: Xinshida/STEP universal servo K1 series
Features:
Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the needs of 2, find the number of pulses or ...
|
|
Xinshida/STEP universal bus type servo iKAS series 6-channel output
Introduction: Powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 sets of data planning, each group of data can be set according to the number of pulses or angles, and the speed, acceleration, and deceleration of the internal position mode can be set.
|
|
Xinshida/STEP servo motor 60E
Introduction: Xinshida/STEP servo motor 60E
Product parameters
Supply voltage: 220VAC (-15-+10%), 50-60Hz
Output power: 200W——600W
Rated line current: 1.2A——3.5A
Rated speed: 3000rpm
...
|
|
Xinshida/STEP integrated all-in-one servo SS series pulse control
Introduction: Xinshida/STEP integrated all-in-one servo SS series adopts 32768 high-resolution encoder, the position control is more accurate, within 3000rpm, and the rated torque output can be guaranteed at any speed.
Features:
Compared with ordinary AC servo:
Below 36V ...
|
|
Xinshida/STEP servo motor 130ST
Introduction: Xinshida/STEP servo motor 130ST
Product parameters
Power range: 1.3kW - 2.4kW
Input voltage: 220VAC (-15-+10%), 50-60Hz
Rated current: 7.0A——12A
Rated torque: 4.2N.m— ...
|
|
The AS610 inverter is rated at ≥ 0.93
Introduction: Xinshida/STEP inverter AS610
Features:
High reliability design
Reliable thermal design
High seismic resistance
High degree of protection
Ultra-low noise operation design
It has a DC input anti-reverse circuit design
Advanced...
|
|
Xinshida/STEP universal bus type servo Ωs-EN1 position control cycle 100μs
Introduction: Xinshida/STEP universal bus servo Ωs-EN1 can cover servo motors with a power of 0.2kW-22kW. Support EtherCAT, PowerLink, CANOpen bus communication, communication rate 100Mbps; Precise position, speed, torque control and superior control
|
|
Xinshida/STEP servo motor 130E
Introduction: Xinshida/STEP servo motor 130E
Product parameters
Rated power: 1kW-5kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 5A - 27.9A
Rated speed: 1500——3 ...
|
|
Xinshida/STEP universal servo K1 series 4-channel input
Introduction: The powerful internal position mode of the new Shida/STEP general-purpose servo K1 series can plan multi-path continuous operation to achieve rich motion control functions; Up to 32 sets of data plans are supported, and each set of data can be based on demand. Find the number of pulses or the angle to set, and you can set the internal ...
|
|
Xinshida/STEP economical integrated machine servo SE series 1 input
Introduction: Xinshida/STEP economical integrated machine servo SE series adopts 32768 high-resolution encoder, the position control is more accurate, within 3000rpm, and the rated torque output can be guaranteed at any speed.
Features:
Compared with ordinary AC servo:
Below...
|
|
Xinshida/STEP universal pulse type servo Ωs-AP2 single-phase AC220V
Introduction: Xinshida/STEP universal pulse servo Ωs-AP2 provides customers with a variety of Calling zero return modes to adapt to the zero return needs of different sites, and also provides 64 points of I/O point control function, which is suitable for customers to pass through different I/O without providing pulse control.
|
|
Xinshida/STEP multi-axis servo KAD series power supply voltage 220VAC
Introduction: The powerful internal position mode of the new Shida/STEP multi-axis servo KAD series can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can set the internal ...
|
|
The new STEP Motion Controller AMC1600C-A06 has a capacity of 512MB
Introduction: Xinshida/STEP Motion Controller AMC1600C-A06, special aircraft motion controller; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, EthernetIP and other industrial fieldbus protocols ...
|
|
Contact
working hours
