Omron E8FC IoT Liquid Flow Sensor Temperature repeatability ± 0.5°C

Introduction: Omron/Omron E8FC IoT liquid flow sensor "flow + temperature" simultaneously monitors and finds abnormal signs of cooling water, temperature repeatability ± 0.5°C, vibration (durability) 10~2000Hz double amplitude 1.5mm X, Y, Z direction 2h.

Omron E8FC IoT Liquid Flow Sensor Temperature repeatability ± 0.5°C

　　parameter

Model	PNP(COM2)	E8FC-25D
	PNP(COM3)	E8FC-25T
	NPN	E8FC-25
Applicable caliber	B Nominal name	3/8"	1/2"	3/4"	1"
	A public name	10A	15A	20A	25A
Applicable fluids		Liquids that do not corrode wetted parts (water, liquids with heat transfer properties equivalent to water, etc.)
*Allowable pressure1**		10MPa
Traffic monitoring ＊2	Rated flow range	0.6～14l/min	1～30l/min	1.5～60l/min	2～100l/min
		I.D. input setting (10A, 15A, 20A, 25A)
	The range can be displayed	0～16 l/min	0～33l/min	0～66l/min	0～110l/min
	*Zero-cut flow3**	0.6l/min	1l/min	1.5l/min	2l/min
	Flow display resolution (l/min)	0.1/1 (switchable)
	Traffic monitors response time	Control output: 1.0, 2.5, 5, 10, 30, 60s
	Traffic monitoring accuracy	±(7.0%+2.0%F.S.) hereinafter
	Flow Repeatability/F.S. (Varies depending on response time)	1s：±3.5%、2.5s：±2.5%、5s：±1.6%、 10s：±1%、30s：±0.8%、60s：±0.6%
	*Ambient temperature characteristics4**	±1.0%F.S./10℃
	Tolerance (hysteresis)	Variable
Temperature monitoring ＊5	*Temperature monitoring rating range6**	0℃～85℃
	Temperature monitoring accuracy	±2.5℃
	Temperature repeatability	±0.5℃
Control the output decide (Optional)	Standard mode	Determine if the measured value is above (below) the threshold
	Windowed mode	Determine if the measured value is within the upper or lower limit range
How it is displayed		Numerical display: 4-digit 7-segment white LED with flip function Status indicator: selectable color normal operation (green), status display (orange), The display content of the abnormal (red) status display. Output indicator: OUT1 (orange), OUT2 (orange) Unit indicator: l/min (white), % (white), °C (white), ST (white) Communication Indicator: Lights up during communication (green)
Delay setting		1ms～9999ms (Functions can be selected from invalid, ON delay, OFF delay, and single trigger)
Connection		M12-4 pole connector type
Output ch1 (Optional)	Control the output	Flow Control Output (N.O./N.C.) E8FC-25D/-25T：PNP E8FC-25：NPN Class 2 DC 30 V or less, 100 mA/ch maximum, residual voltage 1 V or less
	Pulse output	1/10/100/1000 l
Output ch2 (Optional)	Control the output	Flow Control Output (N.O./N.C.) /Temperature Control Output (N.O./N.C.) E8FC-25D/-25T：PNP E8FC-25：NPN Class 2 DC 30 V or less, 100 mA/ch maximum, residual voltage 1 V or less
	Analog current Output*7	Flow Analog Output/Temperature Analog Output Current output: 4~20mA (maximum load resistance 350Ω or less) (Shown value±2%F.S.)
	Pulse output	1/10/100/1000 l
	External inputs	Intelligent tuning, 1-point tuning, short-circuit current 1.5mA or less, The input time is more than 20 ms
IO-Link	IO-Link specification	Ver1.1
	Conveyor speed	E8FC-25D：COM2(38.4kbps) E8FC-25T：COM3(230.4Kbps)
	The data is long	PD size: 6 bytes OD size: 1 byte (M-sequence type: TYPE_2_V)
	Minimum cycle time	E8FC-25D(COM2)：3.2ms E8FC-25T(COM3)：2.0ms
power supply	Supply voltage	DC15~30V (including fluctuation (p-p) 10%), Class 2
	Power consumption	2,880 mW or less (At a power supply voltage of 30 V, the current consumption is 96 mA or less. When the supply voltage is 15V, the current consumption is 192mA or less)
Protection circuits		Power supply reverse polarity protection, output short circuit protection, output reverse polarity protection
Environmental resistance	Ambient temperature range	When working and storing: -20~+80°C each (no freezing, condensation)
	Applicable fluid temperature	0°C~85°C (piping surface does not freeze)
	Ambient humidity range	During operation and storage: 35~85%RH (non-condensing)
	Withstand voltage	AC500V 50/60Hz 1min
	Vibration (Durable)	10~2000Hz double amplitude 1.5mm X, Y, Z in each direction for 2h
	Impact (Durable)	500m/s2 3 times in each direction of X, Y and Z
	Protective structures	IP67
	Pollution level	3 or less
	height	2,000m or less
	Set up a place	indoors
Material	Wetted department	Inspection Department: SUS304L, O-ring: FKM
	Except for the wetted part	Head: PPSU, Display Unit: PES, Button: PBT, Housing: SUS304L, Nut: SUS304
weight		Approximately 190 g
annex		・1 ferrite core (TDK Corporation ZCAT1730-0730A) ・1 instruction manual (Japanese, English, Chinese) ・Compliance table ・Indexed lists

　　We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.

This article introduces the Omron E8FC IoT Liquid Flow Sensor with a temperature repeatability of ±0.5°C products, if you are interested in Omron sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

Omron E8FC IoT Liquid Flow Sensor Temperature repeatability ± 0.5°C

Sections viewed

Contact

working hours