ORMON Encoder E6C2-CWZ5B Outer diameter: φ50, 2,000P/R

Features:

Incremental

Outer diameter: φ50

Resolution (maximum): 2,000P/R

IP64 (improved oil resistance with sealed bearings)

Wire can be pulled out horizontally or backward (wire diagonal pull out method)

ORMON Encoder E6C2-CWZ5B Outer diameter: φ50, 2,000P/R

　　Product parameters

Item Model		E6C2-CWZ6C	E6C2-CWZ5B	E6C2-CWZ3E	E6C2-CWZ1X
Supply voltage		DC5V - 5%～24V + 15% Ripple (P-P) 5% or less	DC12V - 10%～24V + 15% Ripple (P-P) 5% or less	DC5V - 5%～12V + 10% Ripple (P-P) 5% or less	DC5V ± 5% Ripple (P-P) 5% or less
*Current consumption 1**		80mA or less	100mA or less		160mA or less
resolution (Pulse/Rotation)		10、20、30、40、50、 60、100、200、300、 360、400、500、600、 720、800、1,000、 1,024、1,200、1,500、 1,800、2,000	100、200、360、500、 600、1,000、2,000	10、20、30、40、50、60、100、200、300、 360、400、500、600、720、800、1,000、 1,024、1,200、1,500、1,800、2,000
Output phase		A, B, Z phases
Output form		NPN open collector output	PNP open collector output	Voltage output (NPN output)	Linear driver output *2
Output capacity		Applied voltage: 30V or less Load current: 35mA or less Residual voltage: 0.4V or less (at 35mA load current)	Applied voltage: 30V or less Source current: 35mA or less Residual voltage: 0.4V or less (at 35mA source current)	Output resistance: 2kΩ Output current: 20mA or less Residual voltage: 0.4V or less (at 20mA load current)	AM26LS31 quite good Output current H class: IO = -20mA L Grade: IS = 20mA Output voltage VO = 2.5V or more VS = 0.5V or less
*Highest response frequency 3**		100kHz	50kHz	100kHz
Output phase difference		Phase A and Phase B are out of phase 90°±45° (1/4T±1/8T)
Output start, End time		1μs or less (Control output voltage: 5V load current.) Resistance 1kΩ, Wire length: 2m)	1μs or less (Wire length: 2m Load current: 10mA)		0.1μs or less (Wire length: 2m.) IO = -20mA、IS = 20mA)
Starting torque		10 mN・m or less
Moment of inertia		1 × 10-6kg·m2 or less (3 × 10-7kg·m2 below 600P/R)
Maximum axis load	radial	50N
	Axial	30N
The maximum permissible speed		6,000r/min
Protective circuits		Load short-circuit protection, power reverse polarity protection			-
Ambient temperature range		Operating: -10~+70°C, Storage: -25~+85°C (no icing)
Ambient humidity range		During operation and storage: 35~85%RH each (no condensation)
Insulation resistance		100MΩ or more (DC500V megabyte) between the conductor end and the housing
Withstand voltage		AC500V 50/60Hz 1min between the wire end and the housing
Vibration (Durable)		10~500Hz up and down amplitude: 2mm or 150m/s2, X, Y, Z direction sweep frequency 11min/time, sweep frequency 3 times
Impact (Durable)		1,000 m/s2 3 times in each direction of X, Y, and Z
Protective structure		IEC standard IP64, in-house standard oil proof
Connection		Lead-out type (standard wire length 2m)
Material	enclosure	Zinc alloy
	noumenon	aluminium
	axis	SUS420J2
Quality (after packing)		Approximately 400g
annex		Instruction Manual Note: Coupler, bracket, hex wrench sold separately