OMRON Omron sensor E2E-X2MF1-Z 2M consumes 13mA or less

Features:

A standard type for magnetic metal presence detection

Abundant varieties The applicable model can be selected according to the conditions

There is a complete range of different frequency models with anti-mutual interference function

It has excellent environmental resistance

The standard conductor is made of oil-resistant PVC

The detection surface is made of cutting oil-resistant material

Wire sheath is used as standard

OMRON Omron sensor E2E-X2MF1-Z 2M consumes 13mA or less

　　Product parameters

size		M8		M12
shield		shield	Unshielded	shield	Unshielded
Model		E2E-X1R5E□-Z/F□-Z	E2E-X2ME□-Z/F□-Z	E2E-X2E□-Z/F□-Z	E2E-X5ME□-Z/F□-Z
Detection distance		1.5mm±10%	2mm±10%		5mm±10%
Set the distance		0～1.2mm	0～1.6mm		0～4mm
Response		Less than 10% of the detection distance
Objects can be detected		Magnetic metals (Non-magnetic metals have a shorter detection distance.) See "Characteristic Data" on the sample)
Standard detection of objects		Iron 8×8×1mm	Iron 12×12×1mm		Iron 15×15×1mm
*Response frequency 1**		2kHz	0.8kHz	1.5kHz	0.4kHz
Supply voltage (Operating voltage range)*2		DC12~24V ripple(p-p) 10% or less (DC10~40V)
Current consumption		13mA or less
control output	*Switching capacity2**	200mA or less
	Residual voltage	2 V or less (at 200 mA load current, 2 m conductor length)
Light		Action display (red)
Action mode (When close to the object to be detected)		E1/F1 type: NO, E2/F2 type: NC, see the timing diagram of the "Input and Output Loop Diagram" on the sample for details
Protective circuits		Reverse Polarity Protection, Surge Absorption, Load Short Circuit Protection
*Ambient temperature range2**		During operation and storage: -40~+85°C each (no icing and condensation)
Ambient humidity range		During operation and storage: 35~95%RH each (no condensation)
The effect of temperature		In the temperature range of -40~+85°C+23°C, the detection distance is within ±15%. When +23°C is in the temperature range of -25~+70°C, the detection distance is within ±10%.
Effect of voltage		Within the range of ±15% of the rated power supply voltage, the detection distance is within ±1% of the rated power supply voltage
Insulation resistance		50MΩ or more (DC500V megohmmeter) Between the charging unit and the housing
Withstand voltage		AC1,000V 50/60Hz 1min between the charging unit and the case
Vibration (Durable)		10~55Hz Up and down amplitude 1.5mm X, Y, Z in each direction for 2h
Impact (Durable)		500m/s2 10 times in each direction of X, Y and Z		1,000 m/s2 10 times in each direction of X, Y and Z
Protective structure		Lead-out type: IEC standard IP67, in-house standard oil resistant Connector type: IEC standard IP6
Connection		Lead-out type (standard conductor length 2 m), connector type
quality (After Packing)	Lead-out type	Approximately 65 g		Approximately 75 g
	Connector type	Approximately 15g		Approximately 25g
Material	enclosure	Stainless steel (SUS303)		Brass is nickel-plated
	Detection surfaces	PBT
	Tighten the nut	Brass is nickel-plated
	Toothed washers	Iron galvanized
annex		Instruction manual