OMRON Ohmic Proximity Sensor E2B-M12KN08-WZ-B2 2M

Features:

Economical proximity sensors that set new standards

Reliable quality & reasonable price

Complete categories

Reliable performance

Reliable support

OMRON Ohmic Proximity Sensor E2B-M12KN08-WZ-B2 2M

　　Product parameters

project	size	M12
	Detection distance	Single-distance type		Double-distance type
	type	Shielded type	Unshielded	Shielded type	Unshielded
	Model	E2B-M12□S02	E2B-M12□N05	E2B-M12□S04	E2B-M12□N08
Detection distance		2 mm±10%	5 mm±10%	4 mm±10%	8 mm±10%
Set the distance		0～1.6mm	0～4mm	0～3.2mm	0～6.4mm
Tolerance distance		Within 10% of the detection distance
Objects can be detected		Magnetic metals (For non-magnetic metals, the detection distance decreases.) )
Standard Detection Objects (Mild Steel ST37)		12×12×1 mm	15×15×1 mm	12×12×1 mm	24×24×1 mm
Frequency of response (see Note 1). )		1,500 Hz	800 Hz	1,000 Hz	800 Hz
Supply voltage		10~30VDC (including 10% ripple (p-p))
Current consumption		10mA or less
Output type		- Type BNP collector open circuit -Type C: NPN open collector
Control the output	Load current	200mA or less (30VDC or less)
	Residual voltage	2 V or less (at 200 mA load current and 2 m cable length)
Light		Action indicator (yellow LED)
Action mode (when detecting the proximity of an object)		-Type B1/-C1: NO -Type B2/-C2: NC
Protective circuits		Output Polarity Reverse Polarity Protection, Power Supply Polarity Reverse Polarity Protection, Surge Absorption, Short Circuit Protection
Ambient temperature		Working and storage: -25~70°C (no freezing, no condensation)
Temperature effects		-10°C~55°C temperature range: 23°C, within 10% of the detection distance ± Temperature range of -25°C~70°C: At 23°C, ± within 15% of the detection distance
Ambient humidity		Working & Storage: 35~95%
Voltage effects		24VDC±15%: within ±1% detection distance
Insulation resistance		50 MΩ or more under the condition of 500 VDC (between the energized part and the housing)
Dielectric strength		1 minute at 50/60Hz, 1,000 V AC (between energized part and housing)
Vibration resistant		10~55Hz, up and down amplitude 1.5mm, X, Y, Z directions 2h
Impact-resistant		1000m/s2, 10 times in each direction of X, Y and Z
standard		(1)IP67(IEC60529) 　(2)EMC(EN60947-5-2)
Connection		Lead-out type (standard type comes pre-connected with a 4 mm diameter and 2 m/5 m long PVC cable) Connector type (M12-4 pin)
weight (with packaging)	Lead-out type	Standard type: Approx. 80 g, Long thread type: Approx. 85 g (see Note 2)
	Connector type	Standard type: Approx. 35g, Long thread type: Approx. 40g
material	enclosure	Brass is nickel-plated
	Detection surfaces	PBT
	cable	The standard cable uses a PVC cable with a diameter of 4 mm.
	Tighten the nut	Brass is nickel-plated
	Toothed washers	Galvanized iron