OMRON Proximity Sensor E2B-M18KN16-M1-B1 IP67

Features:

Economical proximity sensors that set new standards

Reliable quality & reasonable price

Complete categories

Reliable performance

360° visibility

Easy 360° visibility even in dark environments, so you can mount the sensor at any angle.

　　IP67

Oil Mist Resistant Environment!

We not only test our products for specific items with an inging class (IP67), but also test them for oil mist resistance, taking into account the environmental conditions on the job site. Simulation tests were carried out in an environment with a high concentration of oil mist. apply

Ideal for a wide range of applications

With a wide range of products, you can be sure to find the ideal sensor for your needs. These sensors are used in a wide range of applications such as machine tools and packaging.

OMRON Proximity Sensor E2B-M18KN16-M1-B1 IP67

　　Product parameters

project	size	M18
	Detection distance	Single-distance type		Double-distance type
	type	Shielded type	Unshielded	Shielded type	Unshielded
	Model	E2B-M18□S05	E2B-M18□N10	E2B-M18□S08	E2B-M18□N16
Detection distance		5 mm±10%	10 mm±10%	8 mm±10%	16 mm±10%
Set the distance		0～4mm	0～8mm	0～6.4mm	0～12.8mm
Tolerance distance		Within 10% of the detection distance
Objects can be detected		Magnetic metals (For non-magnetic metals, the detection distance decreases.) )
Standard Detection Objects (Mild Steel ST37)		18×18×1 mm	30×30×1 mm	24×24×1 mm	48×48×1 mm
Frequency of response (see Note 1). )		600Hz	400 Hz	500 Hz	400 Hz
Supply voltage		10~30VDC (including 10% ripple (p-p))
Current consumption		10mA or less
Output type		-Type B: PNP open collector -Type C: NPN open collector
Control the output	Load current	200mA or less (30VDC or less)
	Residual voltage	2 V or less (at 200 mA load current and 2 m cable length)
Light		Action indicator (yellow LED)
Action mode (when detecting the proximity of an object)		-Type B1/-C1: NO -Type B2/-C2: NC
Protective circuits		Output Polarity Reverse Polarity Protection, Power Supply Polarity Reverse Polarity Protection, Surge Absorption, Short Circuit Protection
Ambient temperature		Working and storage: -25~70°C (no freezing, no condensation)
Temperature effects		-10°C~55°C temperature range: 23°C, within 10% of the detection distance ± Temperature range of -25°C~70°C: At 23°C, ± within 15% of the detection distance
Ambient humidity		Working & Storage: 35~95%
Voltage effects		24VDC±15%: within ±1% detection distance
Insulation resistance		50 MΩ or more under the condition of 500 VDC (between the energized part and the housing)
Dielectric strength		1 minute at 50/60Hz, 1,000 V AC (between energized part and housing)
Vibration resistant		10~55Hz, up and down amplitude 1.5mm, X, Y, Z directions 2h
Impact-resistant		1000m/s2, 10 times in each direction of X, Y and Z
standard		(1)IP67(IEC60529) 　(2)EMC(EN60947-5-2)
Connection		Lead-out type (standard type comes pre-connected with a 4 mm diameter and 2 m/5 m long PVC cable) Connector type (M12-4 pin)
weight (with packaging)	Lead-out type	Standard type: Approx. 100 g, Long thread type: Approx. 115 g (see Note 2)
	Connector type	Standard type: Approx. 60g, Long thread type: Approx. 80g
material	enclosure	Brass is nickel-plated
	Detection surfaces	PBT
	cable	The standard cable uses a PVC cable with a diameter of 4 mm.
	Tighten the nut	Brass is nickel-plated
	Toothed washers	Galvanized iron