Omron E2ER/E2ERZ Oil Proximity Sensor Leakage Current: 0.8mA or less

Introduction: Omron E2ER/E2ERZ oil-resistant proximity sensor leakage current: 0.8mA or less, power supply voltage: DC10~30V Oil-resistant proximity sensor with 10% fluctuation (p-p) to suppress failure caused by cutting oil ingress.

Omron E2ER/E2ERZ Oil Proximity Sensor Leakage Current: 0.8mA or less

　　parameter

project	specification	M8	M12	M18	M30
	shield	shield
	Model	E2ER-X2D□	E2ER-X3D□	E2ER-X7D□	E2ER-X10D□
Detection distance		2mm±10%	3mm±10%	7mm±10%	10mm±10%
*Set distance1**		0～1.6mm	0～2.4mm	0～5.6mm	0～8mm
Response		Less than 15% of the detection distance	Less than 10% of the detection distance
Objects can be detected		Magnetic metals (Non-magnetic metals have a shorter detection distance.) Refer to the "Characteristic Data" →sample)
Standard detection of objects		Iron 8×8×1mm	Iron 12×12×1mm	Iron 18×18×1mm	Iron 30×30×1mm
*Response frequency 2**		1.5kHz	1kHz	0.5kHz	0.4kHz
Supply voltage		DC10~30V with fluctuation (p-p) 10%
Leakage current		0.8mA or less
Control the output	Switching capacity	3～100mA
	Residual voltage	3 V or less (at 100 mA load current, 2 m lead)
Light		Type D1: Operation indication (red), setting indication (green) Type D2: Action Indication (Red)
Action mode (When detecting the proximity of an object)		Type D1: NO Type D2: NC　 For details, refer to the sample sequence diagram → "Input and Output Segment Circuit Diagram".
Protection circuits		Surge absorption, load short-circuit protection
Ambient temperature range		Operating: -25~+70°C Storage: -40~+85°C (no freezing, no condensation)
Ambient humidity range		When working and storing: 35~95%RH (non-condensing) respectively
The effect of temperature		Temperature range of -25~+70°C +23°C, detection distance ± within 15%.	+23°C in the temperature range of -25~+70°C, Within 10% of the detection distance ±
Effect of voltage		Within the range of ±15% of the rated power supply voltage, the detection distance is within ±1% of the rated power supply voltage
Insulation resistance		50MΩ or more (DC500V megohmmeter) Between the charging unit and the housing
Pressure-resistant		AC1,000V 50/60Hz 1min between the charging unit and the case
Vibration (Durable)		10~55Hz double amplitude 1.5mm X, Y, Z direction for 2h
Impact (Durable)		500m/s2 10 times in each direction of X, Y, and Z	1,000 m/s2 10 times in each direction of X, Y and Z
Protective structures		IP67 (IEC60529), IP67G (JIS C 0920 Appendix 1) Passed the Omron Oil-Resistant Parts Evaluation Standards*3 Cutting oil type JIS K 2241:2000 cutting oil with a temperature of 35°C or less
Connection		Lead-out type (standard wire length 2 m), connector relay type (standard wire length 300 mm)
weight (Packaging.) Status)	conducting wire Lead-out type	Approximately 65 g	Approximately 75 g	Approximately 145 g	Approximately 215g
	Connector Relay type	Approximately 30 g	Approximately 40 g	Approximately 90 g	Approximately 155 g
Material	circumstance	Stainless steel (SUS303)	Brass nickel plated
	Detection surfaces	Polybutylene terephthalate (PBT)
	Tighten the nut	Brass nickel plated
	Tooth profile Anti-loosening washers	Iron galvanized
annex		Instruction manual

　　This article introduces the Omron/Omron E2ER/E2ERZ oil resistant proximity sensor leakage current: 0.8mA or less products, if you are interested in Omron/Omron sensor, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.

Omron E2ER/E2ERZ Oil Proximity Sensor Leakage Current: 0.8mA or less

Sections viewed

Contact

working hours