Introduction: Xinshida/STEP universal pulse type servo G series
Features:
The new digital signal processor (DSP) and intelligent power module (IPM) and advanced control algorithm are used to realize the high-precision control of the permanent magnet synchronous motor;
The combination of intelligent PID control algorithm and PDFF controller improves the speed and accuracy of position and speed control.
Support encoder signal arbitrary crossover ratio setting;
It supports load disturbance observer, which can be fed forward for torque compensation, which improves the dynamic response of the system.
Inertia recognition and auto-gain functions simplify the system commissioning process;
Debugging software support, mechanical characteristics analysis, parameter setting, monitoring and other functions, intuitive and simple operation;
Product parameters
Supply voltage: 220VAC (-15-+10%), 50-60Hz
Output: 0.75 kW, 1 kW, 1.5 kW, 2 kW, 3 kW
Encoder: 2500-line incremental/wire-saving encoder, 1024-line resolver
Digital IO signal: 8 channels input and 4 channels output
Analog signal: 2 inputs
Communication mode: RS232 custom protocol, RS485 standard Modbus protocol, CAN custom protocol
This article introduces the new Shida/STEP universal pulse type servo G series products, if you are interested in the new Shida/STEP servo, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business
|
More on that
|
Xinshida/STEP universal pulse type servo G series power supply voltage 220VAC
Introduction: Xinshida/STEP universal pulse servo G series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor, intelligent PID control algorithm and PDFF controller combined, improve the position and ...
|
|
Xinshida/STEP universal bus servo iK3 series power range 50W~5kW
Introduction: Xinshida/STEP universal bus servo iK3 series current loop frequency response 2.5kHz, speed loop frequency response 1.6kHz, communication rate 100Mbps. With a variety of filter reducers to improve control stability, support speed curve planning, acceleration and deceleration settings and acceleration and deceleration fillet ...
|
|
Xinshida/STEP servo motor 40ST rated speed 3000rpm
Introduction: Xinshida/STEP servo motor 40ST
Product parameters
Power range: 50W-100W
Quota line voltage: DC 48V/AC 220V
Rated line current: 48V 1.1A-2.5A / 220V 0.4A-0.6A
Rated speed: 300 ...
|
|
Xinshida/STEP universal servo K1 series 2-way input
Introduction: Xinshida/STEP universal servo K1 series
Features:
Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the needs of 2, find the number of pulses or ...
|
|
Xinshida/STEP multi-axis servo K1AD series with a power of 0.75kW
Introduction: Xinshida/STEP multi-axis servo K1AD series mechanical resonance frequency analysis, equipped with two sets of notch filters, adjustable frequency (50-5000Hz) and notch depth, effectively overcome low-frequency resonance and vibration at the end of the machine, can set the vibration frequency (1-100Hz) and vibration damping.
...
|
|
Xinshida/STEP universal servo drive QX-B2 positioning compensation function
Introduction: The QX-B2 is a compact all-digital intelligent servo drive based on the latest DSP technology, which is developed with advanced digital signal processing technology and has high overall efficiency. Not only can traditional high-performance Space Vector (FOC) algorithms be used, ...
|
|
Xinshida/STEP servo motor 180ST
Introduction: Xinshida/STEP servo motor 180ST
Product parameters
Power range: 2.7kW - 4.5kW
Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz
Rated line current: 10.5A——16A (220V A ...
|
|
Xinshida/STEP universal bus type 380V servo KBS series output power 380V
Introduction: Xinshida/STEP universal bus type 380V servo KBS series powerful internal position mode can plan multi-path continuous operation to achieve rich motion control functions; It can support 32 groups of data planning, and each group of data can set the number of pulses or angles according to the needs, and can ...
|
|
Xinshida/STEP servo 60ST rated speed 3000rpm
Introduction: Xinshida/STEP servo 60ST
Product parameters
Power range: 200W-600W
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 1.2A——3.5A
Rated speed: 3000rpm
...
|
|
Xinshida/STEP universal bus type servo Ωs-EN1 position control cycle 100μs
Introduction: Xinshida/STEP universal bus servo Ωs-EN1 can cover servo motors with a power of 0.2kW-22kW. Support EtherCAT, PowerLink, CANOpen bus communication, communication rate 100Mbps; Precise position, speed, torque control and superior control
|
|
The AS610 inverter is rated at ≥ 0.93
Introduction: Xinshida/STEP inverter AS610
Features:
High reliability design
Reliable thermal design
High seismic resistance
High degree of protection
Ultra-low noise operation design
It has a DC input anti-reverse circuit design
Advanced...
|
|
Xinshida/STEP universal pulse servo G2 series output power 0.4kW
Introduction: Xinshida/STEP universal pulse servo G2 series adopts new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high-precision control of permanent magnet synchronous motor; The combination of the intelligent PID control algorithm and the PDFF controller improves the position ...
|
|
Xinshida/STEP servo motor 110B rated speed 2000rpm
Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor
Product parameters
Rated power: 0.4kW - 1.2kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 2. ...
|
|
Xinshida/STEP multi-axis servo Ωm-N1 four-axis in one
Introduction: Xinshida/STEP multi-axis servo Ωm-N1 is a multi-axis product launched by Sigriner, including rectifier unit (AC200V), three-axis integrated and four-axis integrated drive unit (DC300V). The rectifier unit and drive unit can be flexibly configured. The system adopts EtherCAT bus communication, supporting ...
|
|
Xinshida/STEP servo motor 180ST
Introduction: Xinshida/STEP servo motor 180ST
Product parameters
Power range: 2.7kW - 4.5kW
Input voltage: single-phase/three-phase 220VAC/380VAC (-15-+10%), 50-60Hz
Rated line current: 10.5A——16A (220V A ...
|
|
Xinshida/STEP universal pulse type AC servo drive Ω6
Introduction: Xinshida/STEP universal pulse type AC servo drive Ω6
Features:
Self-tuning, free debugging, saving 90% of equipment debugging time;
Speed loop bandwidth: 3.5kHz;
Current loop refresh rate 1MHz;
Three 16-bit analog command inputs can ...
|
|
Xinshida/STEP servo motor 130B rated speed 1500rpm
Introduction: Xinshida/STEP servo motor 130B
Product parameters
Rated power: 0.85kW - 1.8kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 6.9A——15A
Rated speed: 1500r ...
|
|
Xinshida/STEP servo motor 130E
Introduction: Xinshida/STEP servo motor 130E
Product parameters
Rated power: 1kW-5kW
Rated line voltage: 220VAC (-15-+10%), 50-60Hz
Rated line current: 5A - 27.9A
Rated speed: 1500——3 ...
|
|
Xinshida/STEP servo drive QXL I/O10 in and out of 9
Introduction: The new STEP servo drive QXL integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international level. Excellent extensibility, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit improvement...
|
|
Xinshida/STEP high-performance servo drive QXM IO10 in and 9 out
Introduction:Xinshida/STEP high-performance servo drive QXM has excellent expansion performance, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit speed-up, electronic cam, gantry synchronization, capture comparison and other functional characteristics, which are widely used in point ...
|
|
Contact
working hours
