Xinshida/STEP servo motor 130SD rated power 1kW-3kW

Introduction: Xinshida/STEP high-order pulse servo drive K5 series uses advanced motor control algorithm to achieve faster system response, current loop frequency response of 2.5kHz, speed loop frequency response of 1.6kHz, communication rate of 100Mbps. In the actual operation state, the adaptive filter ...

Introduction: The new STEP servo drive QXL integrates the current world's cutting-edge servo control technology, and its excellent driving performance has reached the international level. Excellent extensibility, fast response, stable positioning, vibration suppression, automatic parameter design, programmability, convenient operation, saturation limit improvement...

Introduction: Xinshida/STEP servo motor 130E Product parameters Rated power: 1kW-5kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 5A - 27.9A Rated speed: 1500——3 ...

Introduction: Xinshida/STEP motion controller SC30-B6L, medium-sized PAC, integrated control, one-stop connection, one-platform design; Based on the CoDeSys platform, it fully supports the IEC61131-3 standard programming language; Support configuration programming, support EtherCAT, CANOpen, Etherne...

Introduction: Xinshida/STEP multi-axis servo Ωm-N1 is a multi-axis product launched by Sigriner, including rectifier unit (AC200V), three-axis integrated and four-axis integrated drive unit (DC300V). The rectifier unit and drive unit can be flexibly configured. The system adopts EtherCAT bus communication, supporting ...

Introduction: Xinshida/STEP servo 60ST Product parameters Power range: 200W-600W Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 1.2A——3.5A Rated speed: 3000rpm ...

Introduction: Xinshida/STEP universal bus servo iK3 series current loop frequency response 2.5kHz, speed loop frequency response 1.6kHz, communication rate 100Mbps. With a variety of filter reducers to improve control stability, support speed curve planning, acceleration and deceleration settings and acceleration and deceleration fillet ...

Introduction: Xinshida/STEP 110B servo motor, AC servo motor, permanent magnet AC servo motor Product parameters Rated power: 0.4kW - 1.2kW Rated line voltage: 220VAC (-15-+10%), 50-60Hz Rated line current: 2. ...

Introduction: Xinshida/STEP multi-axis servo K1AD series mechanical resonance frequency analysis, equipped with two sets of notch filters, adjustable frequency (50-5000Hz) and notch depth, effectively overcome low-frequency resonance and vibration at the end of the machine, can set the vibration frequency (1-100Hz) and vibration damping. ...

Introduction: Xinshida/STEP universal pulse servo Ωs-AP2 provides customers with a variety of Calling zero return modes to adapt to the zero return needs of different sites, and also provides 64 points of I/O point control function, which is suitable for customers to pass through different I/O without providing pulse control.

Introduction: Xinshida/STEP servo motor 180B, photoelectric pulse encoder/absolute encoder/resolver Product parameters Rated power: 2.9kW - 7.5kW Rated line voltage: three-phase 380VAC (-15-+10%), 50-60Hz Forehead...

Introduction: Xinshida/STEP servo motor 60S3S Product parameters Rated power: 200W——600W Rated voltage: 220VAC (-15-+10%), 50-60HZ Rated torque: 0.64N.m——1.91N.m Maximum torque: 1.92 ...

Introduction: The QX-B2 is a compact all-digital intelligent servo drive based on the latest DSP technology, which is developed with advanced digital signal processing technology and has high overall efficiency. Not only can traditional high-performance Space Vector (FOC) algorithms be used, ...

Introduction: Xinshida/STEP universal bus servo Ωs-AN1 can cover servo motors with a power of 0.2kW-7.5kW. Support EtherCAT, CANOpen bus communication, communication rate 100Mbps; The frequency response of the current loop is 2kHz, and the frequency response of the velocity loop is 1.6kHz.

Introduction: Xinshida/STEP servo motor 150ST 　　Product parameters Power range: 3.0kW - 5.5kW Input voltage: 220V Rated line current: 14A-27A Rated speed: 2000PRM-2500RPM Rated torque: 15N ...

Introduction: The excellent hierarchical structure of the new Shida/STEP network-based bus servo EM-C series enables the servo software equipped with MDP to run on different CPU hardware platforms, forming a single CPU control 1-8 axis servo products and the integration of bus technology; MDP is convenient for users to ...

Introduction: Xinshida/STEP servo 80SS series, rated power: 750W-1000W Product parameters Rated power: 750W——1000W Number of pole pairs: 5 Rated torque: 2.39N.m——3.18N.m Maximum torque: 7.2N.m——9. ...

Introduction: Xinshida/STEP universal servo K1 series Features: Powerful internal position mode allows for planning multi-path continuous operation for rich motion control functions; Support up to 32 groups of data planning, each group of data can be set according to the needs of 2, find the number of pulses or ...

Introduction: Xinshida/STEP servo motor 60S2S Product parameters Power range: 200W-400W Input voltage: AC - 220V Rated torque: 0.64N.m——1.27N.m Encoder Type: 2500 Line Incremental/Wire Saving Encoder, ...

Introduction: Xinshida/STEP inverter AS610 Features: High reliability design Reliable thermal design High seismic resistance High degree of protection Ultra-low noise operation design It has a DC input anti-reverse circuit design Advanced...