Fluke thermometer gun

Create Date: 2024-8-30 12:03:23|Source: FLUKE

Instructions for use of the Fluke Temperature Measuring Gun.

　　Preparation before use.

Read the manual carefully to understand and familiarize yourself with the functions and precautions of each function key.

Prepare three 5# batteries and install the instrument as required. Each time you measure an environment with a different temperature, leave the instrument for more than 10 minutes to adapt to the new environment.

Confirm that the appearance of the instrument is intact, master all the function keys of the instrument, and then enter the measurement program.

Operating Procedures.

The temperature unit is set to "C".

Align the measuring window of the instrument C] at an appropriate distance (the measurement distance must be less than 4 times the diameter of the measured area) to the workpiece to be measured, and press the measurement button (TEST button) to read the surface temperature of the measured object from the display LCD.

After turning on the measurement button, the machine position must be held for 0.5 seconds.

If the measured object is far away, you can turn on the laser beam indicator (setting method, press and hold the SET button to enter "F-5", select "1" when you select "0", and cancel the laser beam indicator function), and press and hold the measurement button to aim.

Precautions and maintenance requirements.

When measuring, do not aim the laser of this machine directly at the eyes, or irradiate the eyes through reflective surfaces (specular reflection, etc.).

It must be handled with care during use and should be avoided in places with moisture, high temperatures or direct sunlight.

When not in use for a long time, be sure to remove the battery and replace it with a new one immediately when the battery is low to avoid affecting the error of the measured value.

After the test, the test lens must be wiped and not cleaned with any solvent, and the dust can be blown off with compressed air, and the test must be wiped with a damp cotton cloth or a damp soft cloth.

3.5 Load the instrument box.

More on that

	What is a thermal imaging camera? Infrared radiation (heat) emitted by the measured target is passively received and this heat is converted into a temperature number All objects above absolute zero (-273*C) emit infrared radiation). ...
	Use the "sharp eye" to quickly find equipment failures and get twice the result with half the effort! The Fluke VT08 portable thermal imaging camera can check the operation status of power distribution equipment, quickly locate the temperature measurement value of the observation target, take pictures to record the operation status of the equipment, and immediately find hidden dangers and problems in the equipment. Today we have invited a man who works in a cable company.
	Emissivity Emissivity refers to the ratio of the energy radiated from the surface of an object to the energy radiated by a blackbody at the same temperature. (A blackbody is an idealized radiator that radiates all of its energy and has an emissivity of 1.00 on its surface) The emissivity of various substances is determined by the material of the object itself.
	Fluke TiS75+/55+ thermal imaging camera new product released In January 2021, Fluke Corporation of United States released two new thermal imaging cameras - TiS55+ and TiS75+. As the flagship products of Fluke's preferred series of thermal imagers, the TiS55+ and 75+ are in the inheritance of Fluke Instrument's high-quality ...
	Why do Fluke DSX Series network testers need to be calibrated every year? A properly calibrated tester is a smart choice that can ultimately save you money. The right place to get your Fluke network tester calibrated is at one of our 13 authorized service centers around the world, just like those who drive long after the engine service light on the dashboard ...
	Rangefinder, do you really know how to choose Fluke rangefinder, 7 major models, industrial household are all available, so how to choose the most suitable one for you? Step 1: Range selection Small range selectable TA: 404E （40m）、405 （50m）、406E （60m） A large number of options are selected: 408 （80m）、410 （1 ...
	Small size, good looks, big use! F301C blade pliers help industrial control operation and maintenance As a commonly used testing tool, in addition to being easy to use and handy, the appearance is not good-looking, whether it is ergonomic, whether the design is simple and atmospheric, and it is also a lot of advanced requirements that Xiaofu has heard recently. It seems that even if it is a small tool, many of our engineers still want to highlight ...
	Fluke mA loop calibrator The industry's most acclaimed and innovative precision loop calibrator Fluke offers the industry's broadest range of mA calibration and test tools for virtually all types of mA loop testing. The Fluke 710 combines pre-configured control valve testing capabilities, HART communication capabilities, and 0.0 ...
	Launch of the flexible and stand-alone in-line thermal imaging camera - TV30 Flexible and independent online thermal imaging camera - TV30 released The ThermoView TV30 is a mid-to-high-performance industrial thermal imaging system for process automation applications and critical asset monitoring. The TV30SA is a rugged, edge-computing, and highly integrated thermal imaging solution.
	Why is a Fluke multimeter so good? It continues to withstand a minute of 8KV high-voltage impact, it can withstand 3W plug-in test, it can withstand 5000 swing tests, it is unbeatable in the test test of millions of users, it is a Fluke multimeter! We all know that those who seem to have an effortless way to get the first ...
	Power Quality Measurement Technology Issue 6 - The Significance of THD at 40th, 50th and 100th Harmonics? Everyone knows that THD is Total Harmonic Distortion, which is divided into voltage THD and current THD, which indicates the severity of voltage and current waveform distortion. The larger the harmonic content of the waveform, the more serious the waveform distortion and the larger the THD value. Conversely, the lower the THD value. That...
	Schedule-based workflows help you save money on process instrument maintenance It is common for work orders for a single maintenance activity to be assigned to an instrumentation technician. Once the task is complete, the technician returns to the instrument room to fill out the paperwork and record the results before assigning the next task. With plan-based maintenance, multiple tasks and work orders can be assigned to technical ...
	Industrial Ethernet continues to evolve, and you need to pay special attention to these points Industrial automation has been put on the development agenda by many countries, and more enterprises choose industrial Ethernet for information transmission in today's intelligent manufacturing industry. How "optimistic" is Industrial Ethernet? IEEE Global Survey: The Impact of Technology in 2023 and Beyond: Cloud Computing (4 ...
	Fluke 418X - the calibration tool for infrared thermometers Temperature and control in industrial production are very important, the accuracy of temperature measurement determines the quality of products, and temperature parameters also play a vital role in product production efficiency and safe and reliable operation of production lines. For example, advanced infrared measurement has been gradually adopted in heat treatment and thermal processing.
	How to set up a mobile calibration lab - Fluke It's no secret that to ensure the proper functioning of many industries, their equipment needs to be properly calibrated and a regular calibration schedule is implemented. Accurate measurement is always the key to the success of any manufacturing and production process. However, not every device can be sent to a calibration laboratory for calibration on a regular basis. Cause...
	Fluke ii900 Industrial Acoustic Imager Resources Leak detection is simplified At Fluke, we believe there is always a better solution. Today's problem: Up to 40% of the world's industrial energy is lost due to leaks in compressed air systems. Due to low air pressure resulting in energy losses and downtime, there are billions of dollars in the world ...
	In one second, it was found that the catchment drain of metallurgical equipment was blocked, and good equipment was comparable to "perspective eye"! In the field of Fluke infrared thermal imaging, there is a classic product that has been sold for more than ten years - VT04 visual infrared thermometer. And now, Fluke actively listens to customers' voices, explores user needs, and has comprehensively upgraded this thermometer, which has become a hot seller as soon as it was launched.
	Fluke magnetic lanyards are launched In addition to providing safe and durable multimeters, clamp meters and other host products, Fluke has also developed a series of accessories to expand the use of instrumentation. These include stylus for various applications, AC and DC current clamps, thermocouples for different applications, etc. Among the more than 200 accessory products, ...
	Fluke LinkIQ Fiber Package The LinkIQ family of products offers the following features: · Highest qualified 10G speeds · Graphical display of open circuits, short circuits, misconnections, and fault locations · One-click test, no need to log in to the switch, you can get the switch name, port, VLAN, rate, and duplex status ...
	Speed up air leak detection May 9, 2021 \| Basics, Industrial Imaging, Troubleshooting, Energy Management Even the slightest air leak can add to product and energy waste and lose production time – for a production line that can't function properly without compressed air to run tools and processes...