Introduction: The B series of fuselage workshop robots is developed using Kawasaki's mature and advanced technology and rich experience in the automation industry to improve the performance to a new level. The rugged and lightweight, ultra-slim design meets the quest for functionality, flexibility, and investment efficiency optimization to maximize the effectiveness and versatility of spot welding.
Features:
High-speed spot welding
By reducing the weight of the arm, using a high-output true rotary motor, and a new anti-vibration control, the short pitch operation time, which accounts for the main part of the spot welding operation, has been shortened, and the cycle time has been greatly reduced by improving the gun shaft operation sequence of the welding gun.
Built-in cable, air hose
By installing a hollow part in the center of the upper arm and hand yard, it is possible to build cables and air tubes from the base of the robot to the end of the peacock. As a result, there is no need to consider the interference between the cables and the air pipes of the adjacent robot or peripheral equipment due to the external winding method during offline teaching or after the robot is installed. At the same time, the efficiency of offline and on-site teaching operations has also been greatly improved.
Increased installation freedom
Since the installation area and body size are greatly reduced compared to conventional models, the robot can be installed at a high density while the cables and air hose are built-in.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
Maximum load capacity (kg): 300
Maximum Reach (mm): 2,812
Repeatability (mm) ✽1:±0.07
Range of action (°)
Arm rotation (JT1): ±180
Anterior arm (JT2): +76 - -60
Arm up and down (JT3): +90 - -120
Wrist rotation (JT4): ±210
Wrist flexion (JT5): ±125
Wrist torsion (JT6): ±210
Maximum speed (°/s)
Arm rotation (JT1): 125
Anterior arm (JT2): 102
Arm up and down (JT3): 85
Wrist rotation (JT4): 105
Wrist flex (JT5): 110
Wrist torsion (JT6): 180
Allowable load torque (N•m)
Wrist rotation (JT4): 2,300
Wrist flex (JT5): 2,300
Wrist twist (JT6): 1,000
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 240
Wrist flex (JT5): 240
Wrist twist (JT6): 200
Weight (kg): 1,460
Installation: ground
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): E02 / 7.5
Degree of protection: Wrist: IP67 equivalent Pedestal: IP54 equivalent
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Kawasaki/Kawasaki 6-axis robot BX300L with an arm span of 2812mm products, if you are interested in the Kawasaki/Kawasaki robot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki Clean Robot TTS Series Repeatability ± 0.1 mm
Introduction: The TTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation. At the same time, due to the use of the upper and lower shaft telescopic structure, no matter ...
|
|
Kawasaki/Kawasaki arc welding robot RA010L with a payload of 10kg and an arm span of 1925mm
Introduction: Kawasaki RA010L robot's skilled and flexible arc welding robot can be comparable to the welding quality of a skilled welder from the day of the introduction of Kawasaki arc welding robot. It has a large operating range of 1925 mm and can be used for large workpieces.
...
|
|
Kawasaki/Kawasaki arc welding robot RA005L with a payload of 5kg and an arm span of 903mm
Introduction: RA005L arm is a small, skilled and flexible arc welding robot, which is more suitable for the welding of small items. From the day of the introduction of the Kawasaki arc welding robot, it can be comparable to the welding quality of a skilled welder.
Products...
|
|
Kawasaki/Kawasaki Painting Robot KJ125 Load Wrist 8 kg Arm 5 kg
Introduction: The KJ125 robot is a small painting robot with a hollow wrist of φ50mm, which can cope with small rotary cups. Built-in pipelines make it easy to build piping schemes. The body weight is less than 200 kg, the left and right sides are symmetrical, and the lateral area is small, so it can be painted in a narrow field.
...
|
|
Kawasaki/Kawasaki MS005N Robot The maximum reach is 660mm
Introduction: With the increasing prominence of the aging problem, the demand for new drugs is also increasing. There is a risk of operator error or contamination of microorganisms during manual work in pharmaceutical · medical sites, and there is also a risk of radiation to the human body from the storage of highly pharmacologically active pharmaceuticals such as anticancer agents. To avoid ...
|
|
Kawasaki/Kawasaki Control Cabinet D61 Semiconductor Robot Max12-axis
Introduction: D Control Cabinet (Semiconductor Robot) A control cabinet for semiconductor robots that corresponds to one arm of the D60 and two arms of the D61. The compact D60 can control up to 7 axes, and the D61 can control 12 axes. The control cabinet for worldwide use meets both SEMI and CE standards.
...
|
|
Kawasaki/Kawasaki Robot RS080N Load 80kg Reach 2100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki 6-axis robot BX165N with a 2325mm reach
Introduction: The BX165N robot has a maximum arm span of 2325mm with a payload of 165 kg, and the optimized body shop robot can be equipped with a large welding gun, with built-in cables, and a medium-long range of action, even in high-density configurations.
Give birth...
|
|
Kawasaki/Kawasaki Control Cabinet D60 Semiconductor Robot Max7-axis
Introduction: D Control Cabinet (Semiconductor Robot) A control cabinet for semiconductor robots that corresponds to one arm of the D60 and two arms of the D61. The compact D60 can control up to 7 axes, and the D61 can control 12 axes. The control cabinet for worldwide use meets both SEMI and CE standards.
...
|
|
Kawasaki/Kawasaki welding robot BT200L with a load of 200kg and a weight of 1100kg
Introduction: The B series of body shop robots are developed using Kawasaki's mature and advanced technology and rich experience in the automation industry, which takes the performance to a new level. The rugged and lightweight, ultra-slim design meets the quest for functionality, flexibility and investment efficiency ...
|
|
Kawasaki/Kawasaki Arc Welding Robot RA006L Repeatability ± 0.03mm
Introduction: RA006L robot's skilled and flexible arc welding robot, from the day of the introduction of Kawasaki arc welding robot, can be comparable to the welding quality of a skilled welder.
Features:
No hassle required!
...
|
|
Kawasaki/Kawasaki Paint Robot KJ264 weighs 530 kg and has an arm span of 2,640 mm
Introduction: The KJ264 bracket robot has a large hollow inner diameter wrist of φ70, which can be equipped with a spraying machine on the upper part of the arm, and is a lightweight explosion-proof spraying robot with built-in cables and a wide range of motion, which can cope with large workpieces. Bracket type specifications.
...
|
|
Kawasaki/Kawasaki Painting Robot KF192 Payload 12kg Weight 690kg
Description: The K series of coating robots combines powerful programming flexibility with high running performance. The KF192 robot has a BBR-type wrist that is easy to spray on frontal · flat surfaces, and is a space-saving small-area explosion-proof spraying robot.
...
|
|
Kawasaki/Kawasaki Robot RS007L 7KG 930mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki palletizing robot CP180L 4-axis with an arm span of 3255mm
Introduction: CP180L robot is a new high-speed and powerful palletizing robot, with a high-speed palletizing robot with outstanding handling level. It can meet the needs of a wide range of industries such as food, pharmaceuticals, and printed matter in small quantities. It is the lightest weight in its range and is most suitable for improving palletizing efficiency.
...
|
|
Kawasaki/Kawasaki welding robot BX100S payload 100 kg
Introduction: The smallest robot in the BX series, with built-in cables, is more suitable for setting up small and lightweight welding guns and high-density configurations where the robot is installed around the workpiece.
Product parameters
Arm type: Multi-articulated robot
...
|
|
Kawasaki/Kawasaki 6-axis robot RS013N Payload 13kg weight 170kg
Introduction: It is the latest Kawasaki robot with a compact body with the best high speed and wide range of motion among Kawasaki robots in the same class. The R-Series robots continue to innovate in pursuit of higher productivity.
Features:
...
|
|
Kawasaki/Kawasaki Paint Robot KF262 Spraying speed 1.2m/s
Introduction: K series painting robot combines strong programming flexibility and high running performance, KF262 robot has a BBR-shaped wrist that is convenient for frontal · surface spraying, and is a space-saving small area explosion-proof spraying robot.
...
|
|
Kawasaki/Kawasaki Robot RS050N Load 50kg Reach 2,100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Medical & Pharmaceutical Robot MC004N with a payload of 4kg
Introduction: With the increasing prominence of the aging problem, the demand for new drugs is also increasing. There is a risk of operator error or contamination of microorganisms during manual work in pharmaceutical · medical sites, and there is also a risk of radiation to the human body from the storage of highly pharmacologically active pharmaceuticals such as anticancer agents. To avoid ...
|
|
Contact
working hours
