Introduction: With a payload of 250kg and a weight of 1460kg, the Kawasaki/Kawasaki Robot BX250L is an optimized body shop robot and a high-speed robot with a built-in cable with a wide range of movements and a powerful handling capacity.
Features:
High-speed spot welding
By reducing the weight of the arm, using a high-output true rotary motor, and a new anti-vibration control, the short pitch operation time, which accounts for the main part of the spot welding operation, has been shortened, and the cycle time has been greatly reduced by improving the gun shaft operation sequence of the welding gun.
Built-in cable, air hose
By installing a hollow part in the center of the upper arm and hand yard, it is possible to build cables and air tubes from the base of the robot to the end of the peacock. As a result, there is no need to consider the interference between the cables and the air pipes of the adjacent robot or peripheral equipment due to the external winding method during offline teaching or after the robot is installed. At the same time, the efficiency of offline and on-site teaching operations has also been greatly improved.
Increased installation freedom
Since the installation area and body size are greatly reduced compared to conventional models, the robot can be installed at a high density while the cables and air hose are built-in.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
Maximum load capacity (kg): 250
Maximum Reach (mm): 2,812
Repeatability (mm) ✽1:±0.07
Range of action (°)
Arm rotation (JT1): ±180
Anterior arm (JT2): +76 - -60
Arm up and down (JT3): +90 - -120
Wrist rotation (JT4): ±210
Wrist flexion (JT5): ±125
Wrist torsion (JT6): ±210
Maximum speed (°/s)
Arm rotation (JT1): 125
Anterior arm (JT2): 120
Arm up and down (JT3): 100
Wrist rotation (JT4): 140
Wrist flex (JT5): 140
Wrist twist (JT6): 200
Allowable load torque (N•m)
Wrist rotation (JT4): 1,800
Wrist flex (JT5): 1,800
Wrist twist (JT6): 750
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 200
Wrist flex (JT5): 200
Wrist torsion (JT6): 165
Weight (kg): 1,460
Installation: ground
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): E02 / 7.5
Degree of protection: Wrist: IP67 equivalent Pedestal: IP54 equivalent
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Kawasaki/Kawasaki robot BX250L load 250kg weight 1460kg product, if you are interested in Kawasaki/Kawasaki robot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki Medical & Pharmaceutical Robot MC004N with a payload of 4kg
Introduction: With the increasing prominence of the aging problem, the demand for new drugs is also increasing. There is a risk of operator error or contamination of microorganisms during manual work in pharmaceutical · medical sites, and there is also a risk of radiation to the human body from the storage of highly pharmacologically active pharmaceuticals such as anticancer agents. To avoid ...
|
|
Kawasaki/Kawasaki Clean Robot TTS Series Repeatability ± 0.1 mm
Introduction: The TTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation. At the same time, due to the use of the upper and lower shaft telescopic structure, no matter ...
|
|
Kawasaki/Kawasaki Robot RS080N Load 80kg Reach 2100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot RS010N Load 10 kg Weight 150 kg
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot ZX165U 165 Kg 2651 mm
Introduction: ZX165U large general robot has a wide range of achievements in various industries and applications; There is no motor on the wrist, which can work in harsher environments; It can cover a wide range of rotation of 360°.
Product Details
...
|
|
Kawasaki/Kawasaki arc welding robot RA005L with a payload of 5kg and an arm span of 903mm
Introduction: RA005L arm is a small, skilled and flexible arc welding robot, which is more suitable for the welding of small items. From the day of the introduction of the Kawasaki arc welding robot, it can be comparable to the welding quality of a skilled welder.
Products...
|
|
Kawasaki/Kawasaki Robot RS007L Load 7kg Arm span 930mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Clean Robot NTS Series Reach 1066mm
Introduction: The NTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation.
Products...
|
|
Kawasaki/Kawasaki Robot RS007N Load 7kg Arm span 730mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki 6-axis robot BX300L with an arm span of 2812mm
Introduction: The B series of fuselage workshop robots is developed using Kawasaki's mature and advanced technology and rich experience in the automation industry to improve the performance to a new level. The rugged and lightweight, ultra-slim design meets the quest for functionality, flexibility and investment efficiency ...
|
|
Kawasaki/Kawasaki's dual-wrist positioning robot duAro2 carries 3kg of each arm
Introduction: Kawasaki's innovative two-wrist SCARA robot duAro can work together with humans in the same space. The up-down stroke has been expanded from 150 mm to 550 mm, making it possible to seal very deep boxes, greatly expanding the range of applications. In addition, the load has been increased from 2kg to ...
|
|
Kawasaki/Kawasaki Robot RS003N Load 3kg Arm span 620mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries. It has the lightest 3kg load and compact ...
|
|
Kawasaki/Kawasaki Painting Robot KF121 with a payload of 5 kg and an arm span of 1240 mm
Description: The K series of coating robots combines powerful programming flexibility with high running performance. The KF121 is the smallest explosion-proof coating robot in the K series, and it can easily handle everything from the coating of small items to the handling of special explosion-proof environments.
...
|
|
Kawasaki/Kawasaki RS003N-A Small and Medium-sized General Purpose Robot
The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries. [/backcolor]
Featuring Kawasaki's lightest 3kg of robots in this series ...
|
|
Kawasaki/Kawasaki Articulated Robot CX210L with a payload of 210kg
Introduction: Kawasaki CX210L adopts the best robot design concept, absorbs the core components of the world, and combines the actual needs of users. After rigorous experimental testing, the high safety, reliability and stability of the system are ensured. The CX210L system is an efficient handling robot.
...
|
|
Kawasaki/Kawasaki Robot BX100N Load 100kg Arm Span: 2200mm
Introduction: The BX100N robot, an optimized body shop robot, has a range of motion suitable for spot welding, has a built-in cable, is more suitable for setting up a small and lightweight welding gun, and a high-density configuration where the robot is set around the workpiece.
Give birth...
|
|
Kawasaki/Kawasaki arc welding robot RA020N with a payload of 20kg and a weight of 230kg
Introduction: RA020N skilled and flexible arc welding robot, with a maximum load of 20kg in the same series, can cope with large welding guns. From the day the Kawasaki arc welding robot was introduced, it was possible to demonstrate the same abilities as a skilled worker.
...
|
|
Kawasaki/Kawasaki Robot MC004V has a horizontal reach of 506mm
Introduction: With the increasing prominence of the aging problem, the demand for new drugs is also increasing. There is a risk of operator error or contamination of microorganisms during manual work in pharmaceutical · medical sites, and there is also a risk of radiation to the human body from the storage of highly pharmacologically active pharmaceuticals such as anticancer agents. To avoid ...
|
|
Kawasaki YF002N load 2kg operating range ø600×H200mm
Introduction: Kawasaki Parallel Robot [Y Series] is a high-speed sorting robot, which can be widely used in the production line of food, medicine, cosmetics and the assembly of solar panels. The YF002N is lightweight and can be easily set up in tight spaces.
features
Processing power ...
|
|
Kawasaki/Kawasaki palletizing robot CP180L 4-axis with an arm span of 3255mm
Introduction: CP180L robot is a new high-speed and powerful palletizing robot, with a high-speed palletizing robot with outstanding handling level. It can meet the needs of a wide range of industries such as food, pharmaceuticals, and printed matter in small quantities. It is the lightest weight in its range and is most suitable for improving palletizing efficiency.
...
|
|
Contact
working hours
