Introduction: With a payload of 130 kg and a weight of 920 kg, the BX130X robot is an optimized body shop robot and a high-speed robot with built-in cables, which can handle everything from small and lightweight welding guns to medium-sized welding guns.
Features:
High-speed spot welding
By reducing the weight of the arm, using a high-output true rotary motor, and a new anti-vibration control, the short pitch operation time, which accounts for the main part of the spot welding operation, has been shortened, and the cycle time has been greatly reduced by improving the gun shaft operation sequence of the welding gun.
Built-in cable, air hose
By installing a hollow part in the center of the upper arm and hand yard, it is possible to build cables and air tubes from the base of the robot to the end of the peacock. As a result, there is no need to consider the interference between the cables and the air pipes of the adjacent robot or peripheral equipment due to the external winding method during offline teaching or after the robot is installed. At the same time, the efficiency of offline and on-site teaching operations has also been greatly improved.
Increased installation freedom
Since the installation area and body size are greatly reduced compared to conventional models, the robot can be installed at a high density while the cables and air hose are built-in.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
Maximum load capacity (kg): 130
Maximum Reach (mm): 2,991
Repeatability (mm) ✽1:±0.06
Range of action (°)
Arm rotation (JT1): ±160
Anterior arm (JT2): +76 - -60
Arm up and down (JT3): +90 - -75
Wrist rotation (JT4): ±210
Wrist flexion (JT5): ±125
Wrist torsion (JT6): ±210
Maximum speed (°/s)
Arm rotation (JT1): 105
Anterior arm (JT2): 90
Arm up and down (JT3): 130
Wrist rotation (JT4): 200
Wrist flex (JT5): 160
Wrist twist (JT6): 300
Allowable load torque (N•m)
Wrist rotation (JT4): 830
Wrist flex (JT5): 830
Wrist torsion (JT6): 441
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 85
Wrist flex (JT5): 85
Wrist twist (JT6): 45
Weight (kg): 920
Installation: ground
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): E02 / 7.5
Degree of protection: Wrist: IP67 equivalent Pedestal: IP54 equivalent
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Kawasaki/Kawasaki robot BX130X payload 130kg weight 920kg product, if you are interested in Kawasaki/Kawasaki robot, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki Robot RS007L 7KG 930mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot ZX165U 165 Kg 2651 mm
Introduction: ZX165U large general robot has a wide range of achievements in various industries and applications; There is no motor on the wrist, which can work in harsher environments; It can cover a wide range of rotation of 360°.
Product Details
...
|
|
Kawasaki/Kawasaki welding robot BX100S payload 100 kg
Introduction: The smallest robot in the BX series, with built-in cables, is more suitable for setting up small and lightweight welding guns and high-density configurations where the robot is installed around the workpiece.
Product parameters
Arm type: Multi-articulated robot
...
|
|
Kawasaki/Kawasaki painting robot KJ155 6-axis with an arm span of 1545mm
Introduction: The KJ155 robot is a small painting robot with a hollow wrist of φ50mm, which can cope with small rotary cups. Built-in pipelines make it easy to build piping schemes. The body weight is less than 200 kg, the left and right sides are symmetrical, and the lateral area is small, so it can be painted in a narrow field.
...
|
|
Kawasaki/Kawasaki arc welding robot RA020N with a payload of 20kg and a weight of 230kg
Introduction: RA020N skilled and flexible arc welding robot, with a maximum load of 20kg in the same series, can cope with large welding guns. From the day the Kawasaki arc welding robot was introduced, it was possible to demonstrate the same abilities as a skilled worker.
...
|
|
Kawasaki/Kawasaki Robot MX420L Load 420kg Reach 2778mm
Introduction: Based on rich experience and technology, the MX series of large-scale heavy load handling robots has been developed. It has a 420kg payload and a working range of 2,778mm. Kawasaki's original equipment is used to carry large loads in a compact body.
...
|
|
Kawasaki/Kawasaki Robot RS050N Load 50kg Reach 2,100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki palletizing robot CP300L with a payload of 300kg and an arm span of 3255mm
Introduction: The CP300L robot has excellent working range and reliability, and Kawasaki's high-speed palletizing robot helps enterprises improve the efficiency of their production lines. The CP series achieves a maximum load capacity of 700kg, and can also support multiple pallet stacking (1,100 * 1,100 mm, up to four places).
...
|
|
Kawasaki/Kawasaki Robot RS007L Load 7kg Arm span 930mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot BX200L Load 200kg Arm Span: 2597mm
Introduction: BX200L robot load 200kg maximum arm span of 2597mm, optimized body shop robot can replace the existing robot, is a built-in cable, and can cope with large welding guns from the high-speed robot.
...
|
|
Kawasaki/Kawasaki large-payload robot BX165L 6-axle weighs 890kg
Introduction: The BX165L robot is a high-speed robot with built-in cables that can replace existing robots and can replace existing robots.
Product parameters
Arm Type: ...
|
|
Kawasaki/Kawasaki Painting Robot KJ264 has an arm span of 2640mm
Introduction: The KJ264 bracket robot has a large hollow inner diameter wrist of φ70, which can be equipped with a spraying machine on the upper part of the arm, and is a lightweight explosion-proof spraying robot with built-in cables and a wide range of motion, which can cope with large workpieces.
...
|
|
Kawasaki/Kawasaki's dual-wrist positioning robot duAro2 carries 3kg of each arm
Introduction: Kawasaki's innovative two-wrist SCARA robot duAro can work together with humans in the same space. The up-down stroke has been expanded from 150 mm to 550 mm, making it possible to seal very deep boxes, greatly expanding the range of applications. In addition, the load has been increased from 2kg to ...
|
|
Kawasaki/Kawasaki Robot RS050N Load 50kg Reach 2100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Control Cabinet F60 8.3kg 6-axis control number
Introduction: The concentration of control cabinet parts· the reduction of small · weight and the optimization of parts have reduced the size and weight of the control cabinet by 77% and 72% compared with the previous Kawasaki model, and achieved miniaturization. Therefore, it can be stored on a 19-inch stand and can be stacked.
|
|
Kawasaki/Kawasaki 6-axis robot BX300L with an arm span of 2812mm
Introduction: The B series of fuselage workshop robots is developed using Kawasaki's mature and advanced technology and rich experience in the automation industry to improve the performance to a new level. The rugged and lightweight, ultra-slim design meets the quest for functionality, flexibility and investment efficiency ...
|
|
Kawasaki/Kawasaki 6-axis robot RS013N Payload 13kg weight 170kg
Introduction: It is the latest Kawasaki robot with a compact body with the best high speed and wide range of motion among Kawasaki robots in the same class. The R-Series robots continue to innovate in pursuit of higher productivity.
Features:
...
|
|
Kawasaki/Kawasaki palletizing robot RD080N 5-axis weight 540kg
Introduction: The RD080N robot is designed for palletizing applications, the palletizer series has 5 unique robots with load capacities from 80 kg to 500 kg, which can meet most needs. With outstanding working range and reliability, Kawasaki's high-speed palletizing robots help companies improve production line efficiency.
|
|
Kawasaki/Kawasaki Articulated Robot CX210L with a payload of 210kg
Introduction: Kawasaki CX210L adopts the international advanced robot design concept, absorbs the international advanced core components, and combines the actual needs of users. After rigorous experimental testing, the high safety, reliability and stability of the system are ensured. The CX210L system is an efficient ...
|
|
Kawasaki/Kawasaki Robot BX100L has an arm span of 2,597 mm
Introduction: The BX100L robot's optimized body shop robot can be used to replace existing robots, and is a high-speed robot with built-in cables that can handle everything from small and lightweight welding guns to medium-sized welding guns.
Product parameters
Hand...
|
|
Contact
working hours
