Fisher/Fisher 25 VenTemp desuperheater

The Fisher M-Series Hand Turbine Actuator is a fully enclosed, all-weather turbine actuator that provides reliable manual operation for the Fisher A11, A31A, and A41 high-performance butterfly valves. The Fisher M Series Hand Turbine Actuator consists of a body shell, cover, turbine, ...

FisherBettis G Series Pneumatic Valve Actuators function Stable operation in harsh, harsh and insufficient power supply environments The modular design increases efficiency, reduces wear and tear, and extends service life Protected Tension-Lok™ Device Forward Locking Bullet ...

Fisher Yarway probe TempLow desuperheaters automatically introduce cooling water into the steam stream based on pneumatic or electrically controlled signals, providing precise and cost-effective control of steam temperature. specification Critical maintenance steam conditions Equal percentages of flow characteristics, linearity, corrections, etc Operating temperature ...

Fisher easy-e ED control valves are available with straight-through valve bodies, which can be used for regulation or on-off control of a wide range of liquids and gases. With a balanced plug design, cage guidance, and metal-to-metal sealed seat, the Fisher easy-e straight-through valve lets your fluids ...

The 1301 series is a high-pressure pressure regulator used to supply air to instruments. It is equipped with a pressure gauge interface and can be equipped with a pressure gauge as an option. Connection size: NPS 1/4 Regulated pressure range: .0.69 to 34.5 bar/10 to 500 psig Maximum inlet pressure: 414bar/6000psig This article describes the fee ...

The Fisher CAV4 valve is designed for clean, cavitation applications with a pressure drop of more than 207 bar (3000 psi). The Cavitrol™ IV trim in the valve is designed to extend the flow area. Each trim stage has a sequentially increasing flow zone. This guarantees a very ...

The Fisher 4320 Wireless Position Monitor requires no wiring to connect to a pneumatically actuated on/off valve. It utilizes the percentage of range and on/off indication to indicate the device position with a precise wireless feedback signal. The 4320 can be used to control and/or monitor valves, linear pressure regulators, displacements, and floats.

Introduction: Fisher/Fisher A31A low-temperature, high-performance butterfly valves are designed for extreme temperature, cryogenic applications, with an extended body that keeps encapsulated systems and actuators away from extreme temperatures. The valve also features a metal NOVEX eal seal that provides tight shut-off, low operating torque and ...

Description: The Fisher/Fisher 67C series of high-pressure regulators is a high-pressure regulator for a variety of liquid or vapor applications. The Series 67C basic regulator is equipped with wrench adjustment, handwheel adjustment, dial adjustment pattern with calibration scale or non-adjustable vandal spring ...

Introduction: The Fisher/Fisher easy-e cryogenic valve is a single-port ball valve with stainless steel construction and welded extension bonnet. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F).

Designed for applications that require superior noise reduction, Fisher WhisperFlo trims represent the most advanced solutions available. Control valves with WhisperFlo trims provide additional suppression of pneumatic noise in the harshest high-pressure precipitation or gas applications. With phase ...

Fisher Micro-Flat cavitation trims are designed for clean, cavitation, and low flow applications with a maximum pressure drop of 51.7 bar (750 psi). Rather than eliminating cavitation, the trim is designed to control where it occurs to minimize losses. specification Certified in accordance with SIL ...

Introduction: The Fisher/Fisher Model 749B Changeover Manifold Assembly Regulator automatically converts from a supply cylinder to a spare cylinder (when the gas is exhausted). The Fisher Model 749B Regulator is a high-flow conversion manifold for commercial and industrial applications. This assembly is mainly used for the use of HSRL ...

N05500 nickel alloy Boton tubes are also available for applications where the controller must meet the NACE MR0175-2002N05500 standard. Repeatability conforms to the Outer Rim of the Continental Shelf (OCS) Order 5 for United States Bureau of Minerals test deviations and the standards defined in the United States Petroleum Organization (API) RP14C.

The Fisher 3610J pneumatic positioner can be used with a single-acting rotary actuator to precisely locate control valves used in throttling applications. These positioners are rugged and provide valve positioning proportional to the pneumatic input signal or DC current input signal and as a whole ...

Description: The Fisher CSB700 Pressure Reducing Regulator Direct Acting Spring-Loaded Regulator is designed for a wide range of pressure reduction applications. The regulator offers a great deal of flexibility because it offers a variety of body sizes and end connections, outlet pressure settings, and ...

The Fisher 656 diaphragm actuator provides low- to medium-thrust actuation for stent-mounted applications. Such applications include the operation of butterfly valves and built-in turbine valves, louvers, dampers, and other similar equipment. specification Actuation mode: spring return, linear Certified PED, CUTR, ATEX Control...

Introduction: Fisher/Fisher NotchFlo™ DST control valves are designed for use in dirty, cavitation applications. The trims in this valve utilize a range of flow restrictions and extensions to eliminate cavitation, allowing particles up to 12.7 mm (1/2 in) in diameter to pass through without clogging. ...

The Fisher 4195K Gauge Pressure Indicator Controller displays process pressure and set point values on an easy-to-read process dial. These controllers compare the process pressure to the operator's adjusted set point and provide a pneumatic signal to the control element to change the process pressure toward the set point. ...

The Fisher Whisper Trim I cage provides control of aerodynamic noise, especially in water, gas, or steam flow applications. The Whisper Trim I valve cage utilizes multiple specially shaped, dimensional, and spaced orifice to remove the noise generated by the water, gas, or steam flowing through the control valve.