Description: The RSC series is a piezoresistive silicon pressure sensor capable of taking pressure readings from either a digital output or an analog output within a specified full-scale pressure span and temperature range. It calibrates and temperature-compensates for sensor offset, sensitivity, temperature effects, and nonlinearities by a 24-bit analog-to-digital converter with integrated EEPROM. Pressure data is acquired via the SPI interface at rates ranging from 20 to 2000 samples per second. It is designed for use with non-corrosive, non-ionic gases such as air and other dry gases, and is designed and manufactured according to ISO 9001 standards and is REACH and RoHS compliant.
Features:
Pressure range: ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2O to 150 psi; Absolute range 1 bar to 8 bar | 15 psi to 150 psi
Pressure Type: Absolute: This absolute pressure sensor is equipped with an internal vacuum reference value, and the output value is proportional to the absolute pressure. Using atmospheric pressure as a reference, an output value proportional to the difference in atmospheric pressure is provided, differential pressure: the pressure can be measured between two pressure ports
Total Error Zone: Minimum ± 0.25 %FSS (Auto-Zeroing) depending on pressure range
Accuracy: ±0.1 % FSS BFSL (Best Fit Line at Full Scale)
Compensation temperature range: -40 ºC to 85 ºC [-40 ºF to 185 ºF]
Power consumption: Typically less than 10 mW
Dimensions: Small 10 mm x 12,5 mm [0.39 in x 0.49 in] package
Output: SPI-compatible 24-bit digits
Meets IPC/JEDEC J-STD-020D.1 humidity sensitivity level 1 requirements
Product parameters
Series Name: TruStability®RSC
Signal Conditioning: Amplification
Pressure range: ±2 inH2O
Supply current: 1.3 mA standard (standby), 1.7 mA typical
Output: 24-bit digital SPI
Interface Type :RR: Dual radial barbed port, ipsilateral
Total error band: ±2 %FSS
Shock : 100 g with a duration of 6 ms
Operating Temperature: -40°C to 85°C [-40°F to 185°F]
Storage temperature: -40°C to 85°C [-40°F to 185°F]
Measurement Type: Differential Pressure
Temperature Compensation: Yes
Supply voltage: 3.3 Vdc
Transmission Function: External Mathematics
Output calibration: Yes
Package Type :D IP
Accuracy (Best Fit Line): ±0.1%
Vibration: 15 g, 10 Hz to 2 Hz
Compensated temperature range: -20°C to 85°C [-4°F to 185°F]
Media compatibility: Dry gas only
This article introduces the RSCDRRI002NDSE3 products of Honeywell/Honeywell pressure sensors, if you are interested in Honeywell/Honeywell sensors, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Honeywell/Honeywell pressure sensor RSCMJJM005NDSE3
Description: The RSC series is a piezoresistive silicon pressure sensor capable of taking pressure readings from either a digital output or an analog output within a specified full-scale pressure span and temperature range. Through a 24-bit analog-to-digital converter equipped with integrated EEPROM, it is possible to control sensor offset, sensitivity, temperature, etc.
|
|
Honeywell Industrial Gas Sensor S Series
The Honeywell S-Series gas sensors mainly include CLE series and LEL series.
CLE series: Electrochemical gas sensor, which is a microfuel cell element, developed on the basis of the original oxygen sensor. Because of its low power consumption, good selectivity, high sensitivity and ...
|
|
Honeywell Sensors DPT1000U2-B DPT Series
Honeywell Sensors DPT1000U2-B DPT Series Air Differential Pressure Sensors
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance
FeaturesSpecificationsSupply Voltage (Voltage Type)12 ...
|
|
Honeywell/Honeywell sensors ABPDRRT005PG2A5 5Vdc
Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize on-board application-specific integrated circuits (ASICs) to provide significant impact on sensor bias, sensitivity, temperature effects, and ...
|
|
Honeywell Industrial Pressure Sensors 13 mm Series
Honeywell's 13 mm series stainless steel pressure transducers are designed for high-pressure applications that require the measurement of hazardous media in harsh environments. The series features Honeywell's proven piezoresistive semiconductor sensor chips in an oil-filled isolated housing, with or without ...
|
|
Honeywell Humidity Sensor HIH6021-021-001
Introduction: Honeywell Humidicon Digital Humidity/Temperature Sensor: HIH6000 Series, I2C, ±4.5% RH accuracy, SIP 4-pin, no filter, 100 sensors on tape and reel.
Give birth...
|
|
Honeywell Sensor DPT0010T1-A
HONYWELL DPT0010T1-A Sensors DPT Series Air Differential Pressure Sensors
Measuring range: 0 - 10000
Output signal: 4-20mA
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover
|
|
The Honeywell/Honeywell flow sensor AWM3200CR consumes 50mW
Description: AWM3000 Series Air Mass Flow Sensors, Amplified, Flow/Pressure Range: +200 SCCM; Straight port type. Like the AWM2000 Series, the Whiston Twin Bridge controls gas flow measurement. AWM3000 series is enlarged; Therefore, the series can be used to increase the ...
|
|
Honeywell Board Mount Pressure Sensors TruStability™ SSC Series
Compensatory. ±2% FSS to ±4% FSS TEB. Ultra-low (differential, gauge), low (absolute, differential, gauge). Digital or analog output. DIP、SIP、SMT
Pressure range
± 1.6 mbar to ±10 bar, ± 160 Pa to ±1 MPa, ± 0.5 inH20 to ± ...
|
|
Honeywell Sensor DPT0100U2-A
HONYWELL DPT0100U2-A Sensor: DPT Series Air Differential Pressure Sensor
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance
Characteristics and specifications: power supply voltage (voltage ...
|
|
Honeywell Hazardous Area Pressure Sensor Model 911FMD High Range
A large number of ranges. Wet/wet, differential pressure. 17-4 PH Stainless Steel Wetted Material, 1,000 psid to 10,000 psid, 4 mA to 20 mA Output, Two-Wire (Standard)
The Model 911FMD High Range Stainless Steel Wet/Wet Differential Pressure Sensor is designed for harsh industrial applications.
|
|
Honeywell Calibrated Pressure Sensor Model AG400
This model includes a pressure sensor and digital readout combination and is designed for industrial and laboratory applications. Accu-Gage offers portability, high accuracy, industrial-grade durability, and a competitive price. Accu-Gage units are also suitable for panel mounting and can be used in process lines ...
|
|
Honeywell/Honeywell flow sensor AWM3100V weight 10.8g
Description: AWM3000 Series Air Mass Flow Sensors, Amplified, Flow/Pressure Range: +200 SCCM; Straight port type. Like the AWM2000 Series, the Whiston Twin Bridge controls gas flow measurement. AWM3000 series is enlarged; Therefore, the series can be used to increase the ...
|
|
Honeywell/Honeywell flow sensor HAFBLF0750C4AX5
Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...
|
|
Honeywell temperature sensors
RTD & Thermistor Sensing Elements and Temperature Probe Kits; Commercial, precision and high-reliability thermistors/thermal switches.
RTD (Resistance Temperature Detector) Sensing Element: Platinum-based RTDs are laser-trimmed for accuracy and flexibility. These temperature sensors are used to provide stable and fast ...
|
|
Honeywell Sensors JM1210UD4C2
honeywell Honeywell Sensors JM1210UD4C2 Cylindrical Sensors JSM8 Series
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...
|
|
Honeywell/Honeywell pressure sensor HSCDANN001PGSA5
Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...
|
|
Honeywell Temperature Sensor Thermistor 111 Series
Small, hermetically sealed glass balls, axial leads. -60°C to 300°C [-76°F to 572°F]
The 111 series thermistors are hermetically sealed with glass. They are characterized by uniform dimensions, fast response times, and high sensitivity to electrical power. Typically suitable for low heat capacity applications ...
|
|
Honeywell/Honeywell flow sensors AWM2100V Low differential pressure
Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...
|
|
Honeywell/Honeywell pressure sensor NBPDANN150PAUNV
Summary: The NBP series is ideal for users who want to self-compensate, calibrate, and amplify themselves so that they can utilize a bare sensor for maximum resolution output and tailor the algorithm to the requirements of the specific application. In addition, the NBP series is available in a variety of package forms and mounting options ...
|
|
Contact
working hours
