Description: The RSC series is a piezoresistive silicon pressure sensor capable of taking pressure readings from either a digital output or an analog output within a specified full-scale pressure span and temperature range. It calibrates and temperature-compensates for sensor offset, sensitivity, temperature effects, and nonlinearities by a 24-bit analog-to-digital converter with integrated EEPROM. Pressure data is acquired via the SPI interface at rates ranging from 20 to 2000 samples per second. It is designed for use with non-corrosive, non-ionic gases such as air and other dry gases, and is designed and manufactured according to ISO 9001 standards and is REACH and RoHS compliant.
Features:
Pressure range: ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2O to 150 psi; Absolute range 1 bar to 8 bar | 15 psi to 150 psi
Pressure Type: Absolute: This absolute pressure sensor is equipped with an internal vacuum reference value, and the output value is proportional to the absolute pressure. Using atmospheric pressure as a reference, an output value proportional to the difference in atmospheric pressure is provided, differential pressure: the pressure can be measured between two pressure ports
Total Error Zone: Minimum ± 0.25 %FSS (Auto-Zeroing) depending on pressure range
Accuracy: ±0.1 % FSS BFSL (Best Fit Line at Full Scale)
Compensation temperature range: -40 ºC to 85 ºC [-40 ºF to 185 ºF]
Power consumption: Typically less than 10 mW
Dimensions: Small 10 mm x 12,5 mm [0.39 in x 0.49 in] package
Output: SPI-compatible 24-bit digits
Meets IPC/JEDEC J-STD-020D.1 humidity sensitivity level 1 requirements
Product parameters
Series Name: TruStability®RSC
Signal Conditioning: Amplification
Pressure Range: ±5 inH2O
Supply current: 1.3 mA standard (standby), 1.7 mA typical
Output: 24-bit digital SPI
Interface Type :JJ: Dual radial spikeless port, ipsilateral
Total Error Band: ±3 %FSS
Shock : 100 g with a duration of 6 ms
Operating Temperature: -40°C to 85°C [-40°F to 185°F]
Storage temperature: -40°C to 85°C [-40°F to 185°F]
Measurement Type: Differential Pressure
Temperature Compensation: Yes
Supply voltage: 3.3 Vdc
Transmission Function: External Mathematics
Output calibration: Yes
Package Type: SMT
Accuracy (Best Fit Line): ±0.1%
Vibration: 15 g, 10 Hz to 2 Hz
Compensated temperature range: 0°C to 50°C [32°F to 122°F]
Media compatibility: Dry gas only
This article introduces the RSCMJJM005NDSE3 products of Honeywell pressure sensors, if you are interested in Honeywell sensors, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Honeywell Industrial Pressure Sensors Model LM
Industrial-grade gauge pressure sensor with 1 psig to 10,000 psig output in mV/V. ±0.50% FS BFSL
The Model LM pressure transducer is a cost efficient general purpose gage-only device. The sensor is available in three materials, which are ...
|
|
Honeywell Logistics Sensing ED40 2D Decoder Board
Hi-speed USB 2.0 interface. Small footprint. Fast microprocessor. Compatible with Honeywell EAXX 2D scan engines. Low power consumption
Scan-intensive applications need to be faster. Deploying the Honeywell ED40 high-performance 2D decoder board in an OEM solution is like "stepping on the gas", ...
|
|
Honeywell Sensors JSM81E5D4X
honeywell Honeywell Sensors JSM81E5D4X Cylindrical Sensors JSM8 Series
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...
|
|
Honeywell temperature sensor thermistor
The resistance changes with temperature. Wide range of resistance values and temperatures, package styles, and sizes.
The thermistor changes its resistance with temperature. They do not amplify, correct, polarize, or generate signals. The temperature of the thermistor can change due to the ambient temperature, or the self-heating generated by the passage of electric current.
|
|
Honeywell/Honeywell RTD Sensor HEL-700 Series
100 Ω or 1000 Ω platinum resistance temperature sensor (RTD). -75°C to 500°C, TFE Teflon or fiberglass alumina tubing with leads
The HEL-700 series of thin-film platinum RTDs (Resistance Temperature Sensors) are designed to monitor critical temperatures in industrial applications. They mention ...
|
|
Honeywell/Honeywell pressure sensor PX3AF1BH010BSAAX
Introduction: Honeywell's PX3 series heavy-duty pressure sensors feature piezoresistive sensing technology based on ASIC (application-specific integrated circuit) signal conditioning and are equipped with a brass housing and Metri-Pack 150 or wiring harness electrical connection. The PX3 series is fully calibrated and operates at -40°C to 125° ...
|
|
Honeywell/Honeywell sensors ABPDRRT005PG2A5 5Vdc
Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize on-board application-specific integrated circuits (ASICs) to provide significant impact on sensor bias, sensitivity, temperature effects, and ...
|
|
Honeywell Board Mount Pressure Sensors TruStability™ RSC Series
Compensatory. As low as ±0.25 %FSS TEB. Ultra-low (differential, gauge), low (absolute, differential, gauge). 24-bit digital SPI-compatible output. DIP，SMT
Pressure range
± 1.6 mbar to ±10 bar, ± 160 Pa to ±1 MPa, ± 0.5 inH2 ...
|
|
Honeywell Sensor DPT5000U1-A
HONYWELL DPT5000U1-A Sensor DPT Series Air Differential Pressure Sensor
Measuring range: 0-5000
Output signal: 4-20mA
Sensor: DPT series air pressure differential sensor
All-stainless steel capacitive sensing element • Good temperature stability and long-term stability ...
|
|
Honeywell Sensors DPT1000U2-B DPT Series
Honeywell Sensors DPT1000U2-B DPT Series Air Differential Pressure Sensors
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance
FeaturesSpecificationsSupply Voltage (Voltage Type)12 ...
|
|
Honeywell Stamp Pressure Sensor A-105
Flush membrane pressure transducer ranging from 100 psi to 15,000 psi with 0.50% full-scale accuracy
The Model A-105 gauge pressure sensor is manufactured using a synthetic 17-4 PH stainless steel wetted diaphragm. The advantage of this type of design is that the thin diaphragm and the heavy side walls are made up of the same piece of non-...
|
|
Honeywell Sensors JM1206ED3C2
honeywell Honeywell Sensors JM1206ED3C2 Cylindrical Sensors JSM8 Series
Rated: 12VDC-24VDC
Load current: ≤100mA
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
cylindrical ...
|
|
Honeywell/Honeywell sensors TSCSNBN005PDUCV low power consumption
Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...
|
|
Honeywell Sensors JM1204UD1C2
Honeywell Sensors JM1204UD1C2 Cylindrical Sensors JSM8 Series
Rated: 12VDC-24VDC
Load current: ≤100mA
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: ...
|
|
Honeywell Temperature Sensor Thermistor 135 Series
Glass-encapsulated chip, DO-35 type. -60°C to 300°C [-76°F to 572°F]
The 135 Series thermistors are high-quality, hermetically sealed, glass-sealed devices in an axial-leaded package. Uniform size, often suitable for automated assembly. Tinned copper-clad steel leads can be soldered and soldered...
|
|
Honeywell/Honeywell pressure sensor HSCDANN001PGSA5
Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...
|
|
Honeywell/Honeywell flow sensors AWM2100V Low differential pressure
Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...
|
|
Honeywell/Honeywell pressure sensor NBPDPNS001PGUNV
Summary: The NBP series is ideal for users who want to self-compensate, calibrate, and amplify themselves so that they can utilize a bare sensor for maximum resolution output and tailor the algorithm to the requirements of the specific application. In addition, the NBP series is available in a variety of package forms and mounting options ...
|
|
Honeywell JSM802ED2C2 Cylindrical Sensors JSM8 Series
Honeywell Sensors JSM802ED2C2 Cylindrical Sensors JSM8 Series
Rated: 12VDC-24VDC
Load current: ≤100mA
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: ...
|
|
Honeywell Temperature Sensor Thermistor 143 Series
5,08 mm [0.2 in] diameter disc, adjacent leads, uncoated. -60°C to 150°C [-76°F to 302°F]
The 143 series thermistors are available in a wide range of custom resistance values. The pins are not insulated. Tape and reel packaging are also available.
Dissipation constant in still air: 4.0 ...
|
|
Contact
working hours
