Honeywell Hazardous Area Pressure Sensor Model 911FMD High Range

Ultra-high accuracy wet/wet differential transmitter ranging from 50 psid to 750 psid with ±0.10% full-scale accuracy The TJE Medium, Ultra-Precision Range, Wet/Wet, Differential Pressure is a foil-mounted strain gauge sensor that accepts fluids at both ports and is capable of measuring from 50 psid to 75 ...

The CRIR series is a single-channel, non-dispersive infrared (NDIR) sensor. The CRIR M1 and CRIR E1 have a sensing cavity with an infrared light source at one end and a detector with a filter on the other. The light source emits a wavelength of radiation that includes a CO2 absorption band. Filters block ...

General Purpose Gauge/Absolute-Pressure Transducer with a pressure range of 0.5 psig to 60,000 psig (absolute) and ±0.10% full-scale accuracy The model TJE pressure sensor is an all-welded stainless steel sensor designed for harsh industrial applications where accuracy and measurement stability are critical.

Description:MIP Series Heavy Duty, Media Isolated Pressure Sensor, Absolute, 0 bar to 4 bar, 4.75 V to 5.25 V power supply, Ratio meter: 5.0 Vdc to 4.5 Vdc output, Metri-Pack 150, Standard (UL V-0), 7/16-20 UNF 1/4 i ...

honeywell Honeywell Sensors JSM81E5D4X Cylindrical Sensors JSM8 Series Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...

The Honeywell S-Series gas sensors mainly include CLE series and LEL series. CLE series: Electrochemical gas sensor, which is a microfuel cell element, developed on the basis of the original oxygen sensor. Because of its low power consumption, good selectivity, high sensitivity and ...

Industrial-grade gauge pressure sensor with 1 psig to 10,000 psig output in mV/V. ±0.50% FS BFSL The Model LM pressure transducer is a cost efficient general purpose gage-only device. The sensor is available in three materials, which are ...

Chips, bare wires, epoxy coating. -60°C to 125°C [-76°F to 257°F] The 197 series thermistors are available in a wide range of custom resistance values. Fast response time. Dissipation constant in still air: 0.75 mW/°C Time constant in air: 15.0 s Nominal...

HONYWELL DPT5000U1-A Sensor DPT Series Air Differential Pressure Sensor Measuring range: 0-5000 Output signal: 4-20mA Sensor: DPT series air pressure differential sensor All-stainless steel capacitive sensing element • Good temperature stability and long-term stability ...

honeywell Honeywell Sensors JSM802ED3C2 Cylindrical Sensors JSM8 Series Rated: 12VDC-24VDC Load current: ≤100mA Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: ...

Digital Hall-effect position sensor. Plastic threaded sleeve encapsulation. Current sink output The SR3 series of digital Hall-effect position sensors are housed in a 14 mm cylindrical plastic housing and support both current sink output and DC power supply This article introduces Honeywell's value-added packaging ...

E-I tested matching beads on the fitting assembly. -60°C to 300°C [-76°F to 572°F] The 115 series thermistors consist of two beads, each mounted on a special hermetically sealed joint. High resistance thermistors should be used at high ambient temperatures to achieve the most ...

Honeywell Sensors JSM802ED2C2 Cylindrical Sensors JSM8 Series Rated: 12VDC-24VDC Load current: ≤100mA Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: ...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Introduction: The AWM700 series microbridge mass flow sensors enable coaxial flow measurement with a specially designed bypass flow housing. The sensor can measure flow rates up to 200 standard liters per minute (SLPM) while typically generating a pressure drop of 1 in H2O. The AWM700 features ...

Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...

Description: AWM3000 Series Air Mass Flow Sensors, Amplified, Flow/Pressure Range: +200 SCCM; Straight port type. Like the AWM2000 Series, the Whiston Twin Bridge controls gas flow measurement. AWM3000 series is enlarged; Therefore, the series can be used to increase the ...

Introduction: The 21FW Series Single-Channel Sensor, the 23FW Series Three-Channel Sensor, and the 5FW Series Magnetic Targets were originally designed and built for the Lockheed Martin Joint Strike Fighter. Hall-effect sensors and magnetic targets are highly reliable, slim, and more resistant to electromagnetic ...

Hi-speed USB 2.0 interface. Small footprint. Fast microprocessor. Compatible with Honeywell EAXX 2D scan engines. Low power consumption Scan-intensive applications need to be faster. Deploying the Honeywell ED40 high-performance 2D decoder board in an OEM solution is like "stepping on the gas", ...

The MG series magnets can be used as actuators for Hall-effect and magnetoresistive sensor integrated circuits with unipolar or omnipolar magnetic characteristics. Available in a wide range of compact configurations, strengths, and magnetic materials, the MG Series magnets can be used as actuators for unipolar or omnipolar magnetic applications.