Honeywell Sensors JM1210UD4C2

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...

Description: The 24PC SMT (Surface Mount Technology) series of pressure sensors provides a low-cost, high-value, compact pressure sensing solution for printed circuit board (PCB) use. Based on the consistent reliability and accuracy of the 26PC pressure sensor, the 24PC SMT pressure sensor can be used in ...

Summary: The SSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the circuit board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Description: The 24PC SMT (Surface Mount Technology) series of pressure sensors provides a low-cost, high-value, compact pressure sensing solution for printed circuit board (PCB) use. Based on the consistent reliability and accuracy of the 26PC pressure sensor, the 24PC SMT pressure sensor can be used in ...

Honeywell Sensors DPT0250U1-A DPT Series Air Differential Pressure Sensors Measuring range: 0-250 Output signal: 4-20mA All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy use

Medium range. Wet/wet, differential pressure. 17-4 PH stainless steel wetted material. Accuracy: 0.25% FS; Range: 50 psid to 750 psid. The Model 911FMD Medium Range Stainless Steel Transmitter is made of 17-4 PH stainless steel wetted parts and is hermetically sealed for use in hazardous environments.

Standard glass probe. -60°C to 300°C [-76°F to 572°F] The 121 series and thermistors are shock-resistant, rugged, glass-sealed devices that are typically suitable for immersion in liquids and can be easily installed in air sensor assemblies. A small glass probe configuration (12 ...

Ultra-high accuracy wet/wet differential transmitter ranging from 50 psid to 750 psid with ±0.10% full-scale accuracy The TJE Medium, Ultra-Precision Range, Wet/Wet, Differential Pressure is a foil-mounted strain gauge sensor that accepts fluids at both ports and is capable of measuring from 50 psid to 75 ...

General Purpose Gauge/Absolute-Pressure Transducer from 0.5 psig to 60,000 psig (Absolute) with ±0.25% Full-Scale Accuracy The Model Z pressure sensor is made of 17-4 PH stainless steel, wetted material that can withstand pressures up to 2,000 psi, and 15-5 PH stainless steel, which can withstand ...

Uni-Curve thermistors with bare wires and epoxy coatings. -60°C to 150°C [-76°F to 302°F] The 192 series thermistors are high-quality, cost-effective, resistive and temperature-matched, interchangeable devices. The product does not need to resist the temperature of the circuit components one by one.

Honeywell Sensors DPT1000U2-A DPT Series Air Differential Pressure Sensors Measuring range: -1000-0-1000 Output signal: 4-20mA Sensor: DPT series air pressure differential sensor All-stainless steel capacitive sensing element • Good temperature stability and long-term ...

Introduction: The 21FW Series Single-Channel Sensor, the 23FW Series Three-Channel Sensor, and the 5FW Series Magnetic Targets were originally designed and built for the Lockheed Martin Joint Strike Fighter. Hall-effect sensors and magnetic targets are highly reliable, slim, and more resistant to electromagnetic ...

Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...

honeywell Honeywell Sensors JSM81E5D4X Cylindrical Sensors JSM8 Series Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...

Compensatory. TEB (Total Error Band): ±1% FSS to ±3% FSS. Ultra-low (differential, gauge), low (absolute, differential, gauge). Digital or analog output. DIP、SIP、SMT Pressure range ± 1.6 mbar to ±10 bar, ±160 Pa to ±1 MPa, ±0. ...

The Series 3 is City Technology's oldest family of gas sensors. A wide range of sensors have evolved from this series and are available with 4mA to 20mA and mV transmission boards. The Series 7 is an upgrade to the series. This article introduces the Honeywell/Honeywell ...

HONYWELL DPT0100U2-B Sensor DPT Series Air Differential Pressure Sensor All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance Characteristics and specifications: power supply voltage (voltage ...

Compensatory. ±2% FSS to ±4% FSS TEB. Ultra-low (differential, gauge), low (absolute, differential, gauge). Digital or analog output. DIP、SIP、SMT Pressure range ± 1.6 mbar to ±10 bar, ± 160 Pa to ±1 MPa, ± 0.5 inH20 to ± ...

Description: The AWM1000 series of mass flow sensors offers all the benefits of the standard AWM2000 series, but at an even greater cost-effectiveness. This unit provides accurate, repeatable airflow sensing. The sensor-to-sensor interchangeability specification is approximately twice that of the AWM2000 series. ...