Honeywell Calibrated Pressure Sensor Model AG400

Amplified. ±1% FSS type TEB. Absolute, sealed gauge pressure. Housing Material: Brass C36000, Range: 1 bar to 50 bar, 15 psi to 700 psi Honeywell's PX3 series heavy-duty pressure sensors feature ASIC (Application-Specific Integrated Circuit) signal conditioning based piezoresistive ...

City Technology's Series 5 advanced gas sensors are designed to ensure peak performance in harsh environments for flue gas analyzers and combustion efficiency monitors. City Technologies' Series 5 Advanced Gas Sensors are designed to ensure that flue gas analyzers and ...

Compensatory. Calibrated zero sum and span. mV output. Low noise. Small form factor and high impedance. Very low pressure resolution Pressure range ±4 inH20 to ±10 inH20 The SCXL series of sensors offers ...

E-I tested matching beads on the fitting assembly. -60°C to 300°C [-76°F to 572°F] The 115 series thermistors consist of two beads, each mounted on a special hermetically sealed joint. High resistance thermistors should be used at high ambient temperatures to achieve the most ...

HONYWELL DPT5000U1-A Sensor DPT Series Air Differential Pressure Sensor Measuring range: 0-5000 Output signal: 4-20mA Sensor: DPT series air pressure differential sensor All-stainless steel capacitive sensing element • Good temperature stability and long-term stability ...

High resolution, low lower detection limit. Customized low-noise circuit boards achieve high accuracy in ppb levels. Reliable gas sensor to detect a wide range of gases: carbon monoxide (CO), nitrogen dioxide (NO2), ozone (O3), sulfur dioxide (SO2) are mainly used for environmental monitoring, ...

Honeywell Sensors DPT0250U1-B DPT Series Air Differential Pressure Sensors Measuring range: 0-250 Output signal: 0-10V All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy use

Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...

Paired large glass probes. -60°C to 300°C [-76°F to 572°F] The 129 Series thermistors are designed with precision sensing elements that require curve-fitting interchangeability for precision temperature control and precision temperature indication. These products are highly reliable and consist of a pair of ...

Compensatory. Low voltage. mV output. Differential pressure, wet/wet differential pressure, gauge pressure. DIP、SIP、SMT。 Linearity and hysteresis: 0.5 % typ. Pressure range 0.5 psi to 250 psi (SIP, DIP) 1 psi to 15 psi (SMT) Factory calibrated 26PC Series miniature press...

Summary: The SSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the circuit board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Medium range. Wet/wet, differential pressure. 17-4 PH stainless steel wetted material. Accuracy: 0.25% FS; Range: 50 psid to 750 psid. The Model 911FMD Medium Range Stainless Steel Transmitter is made of 17-4 PH stainless steel wetted parts and is hermetically sealed for use in hazardous environments.

Introduction: Honeywell Humidicon Digital Humidity/Temperature Sensor: HIH6000 Series, I2C, ±4.5% RH accuracy, SIP 4-pin, no filter, 100 sensors on tape and reel. Products...

Introduction: Honeywell's PX3 series heavy-duty pressure sensors feature piezoresistive sensing technology based on ASIC (application-specific integrated circuit) signal conditioning and are equipped with a brass housing and Metri-Pack 150 or wiring harness electrical connection. The PX3 series is fully calibrated and operates at -40°C to 125° ...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

The 1 Series analog gas sensor is a compact and slim sensor with proven City Technology. The service life of these sensors has been extended by five years, and the operating temperature and humidity range has been significantly expanded. Can be used for a wider range of environmental conditions changed to "can be used for more ...

100 Ω or 1000 Ω platinum resistance temperature sensor (RTD). -75°C to 500°C, TFE Teflon or fiberglass alumina tubing with leads The HEL-700 series of thin-film platinum RTDs (Resistance Temperature Sensors) are designed to monitor critical temperatures in industrial applications. They mention ...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Introduction: Honeywell's TBP series of compensated and non-amplified basic board-mount pressure sensors are specifically designed piezoresistive silicon pressure sensors. This series of sensors is simple and easy to operate, excellent quality, cost-effective, mV output, non-amplification and temperature compensation.

Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...