Honeywell/Honeywell flow sensor AWM3100V weight 10.8g

5,08 mm [0.2 in] diameter disc, adjacent leads, uncoated. -60°C to 150°C [-76°F to 302°F] The 143 series thermistors are available in a wide range of custom resistance values. The pins are not insulated. Tape and reel packaging are also available. Dissipation constant in still air: 4.0 ...

Introduction: Honeywell's PX3 series heavy-duty pressure sensors feature piezoresistive sensing technology based on ASIC (application-specific integrated circuit) signal conditioning and are equipped with a brass housing and Metri-Pack 150 or wiring harness electrical connection. The PX3 series is fully calibrated and operates at -40°C to 125° ...

Compensatory. Calibrated zero sum and span. mV output. Low noise. Small form factor and high impedance. Very low pressure resolution Pressure range ±4 inH20 to ±10 inH20 The SCXL series of sensors offers ...

3.81 mm [0.15 in] diameter disc, adjacent leads, epoxy coated. -60°C to 150°C [-76°F to 302°F] The 142 series thermistors are available in different custom resistance values. The pins are not insulated. Tape and reel packaging are also available. Dissipation in still air is often ...

100 Ω or 1000 Ω platinum resistance temperature sensor (RTD). Temperature range: -55°C to 150°C, SIP encapsulated ceramic housing The HEL-775 series platinum RTDs are designed to measure temperature in printed circuit boards, temperature probes, or other cryogenic applications with a measurement range of -55° ...

Compensatory. ±2% FSS to ±4% FSS TEB. Ultra-low (differential, gauge), low (absolute, differential, gauge). Digital or analog output. DIP、SIP、SMT Pressure range ± 1.6 mbar to ±10 bar, ± 160 Pa to ±1 MPa, ± 0.5 inH20 to ± ...

Introduction: 200FW Series, Shielded 3-Wire DC Current Sink Output (NPN), NC Proximity Sensor, 0.625 Inch Cylindrical Housing , 20 ga, MIL-W-22759/7 Wire 2.4 mm to 11.4 mm [.09 in to .45 in] with 101MG7 Magnetic Target

HONYWELL DPT0100U2-A Sensor: DPT Series Air Differential Pressure Sensor All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance Characteristics and specifications: power supply voltage (voltage ...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Description: The AWM1000 series of mass flow sensors offers all the benefits of the standard AWM2000 series, but at an even greater cost-effectiveness. This unit provides accurate, repeatable airflow sensing. The sensor-to-sensor interchangeability specification is approximately twice that of the AWM2000 series. ...

Compensatory. Low voltage. mV output. Differential pressure, wet/wet differential pressure, gauge pressure. DIP、SIP、SMT。 Linearity and hysteresis: 0.5 % typ. Pressure range 0.5 psi to 250 psi (SIP, DIP) 1 psi to 15 psi (SMT) Factory calibrated 26PC Series miniature press...

Compensatory. Low voltage. Gauge pressure. mV output. DIP, lead-free SMT, SMT. Accuracy: ±0.25% FSS BFSL. Cost-effective Pressure Range: TBP Series: 60 mbar to 10 bar, 6 kPa to 1 MPa, 1 psi to 150 psi, microvolt analog output NBP Department ...

Full range of industrial-grade sensors: media-isolated design, multiple ports, electrical configurations, and outputs ranging from 0 psi to 250 psi. Our sensing element design consists of four piezoresistive elements placed on a chemically etched silicon diaphragm. The change in pressure causes the diaphragm and the built-in electrical ...

Summary: The SSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the circuit board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Non-amplified. Absolute, gauge, vacuum gauge. Wetted parts: 316L SS; Pressure range: 0 psi to 3 psi to 0 psi to 500 psi. Ribbon cable terminals Honeywell's stainless steel 19C, 19U and 19 gauge series sensors are designed for applications that require ...

Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize on-board application-specific integrated circuits (ASICs) to provide significant impact on sensor bias, sensitivity, temperature effects, and ...

The CRIR series is a single-channel, non-dispersive infrared (NDIR) sensor. The CRIR M1 and CRIR E1 have a sensing cavity with an infrared light source at one end and a detector with a filter on the other. The light source emits a wavelength of radiation that includes a CO2 absorption band. Filters block ...

The 1 Series analog gas sensor is a compact and slim sensor with proven City Technology. The service life of these sensors has been extended by five years, and the operating temperature and humidity range has been significantly expanded. Can be used for a wider range of environmental conditions changed to "can be used for more ...

Two-wire. Gauge/absolute pressure transmitter, psig/a to 10,000 psig/a, 4 mA to 20 mA output, 0.25% accuracy. True gauge pressure device with airtight design The Model 811FM is a two-wire transmitter with a weldable stainless steel diaphragm for liquid, gas, ...