Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize an on-board application-specific integrated circuit (ASIC) to calibrate and temperature compensate for sensor bias, sensitivity, temperature effects, and accuracy errors, including nonlinearity, repeatability, and hysteresis. The calibrated analog and digital output values are updated at a rate of approximately 1 kHz and 2 kHz, respectively. All products are designed and manufactured in accordance with ISO 9001 standards.
Features:
Measure gauge pressure and differential pressure
Total error zone: ±1.5 %FSS
Liquid Media Option: Allows wet/wet operation on dual-port devices
Industry-leading long-term stability: ±0.25 %FSS
Industry-leading accuracy: ± 0.25% FSS BFSL
Wide pressure range: 60 mbar to 10 bar| 6 kPa to 1 MPa | 1 psi to 150 psi
Extremely small at 8 mm x 7 mm
High blast pressure
Calibrated over a temperature range of 0°C to 50°C [32°F to 122°F].
Operates from a single supply of 3.3 Vdc or 5.0 Vdc
Output: Proportional analog output, or 12-bit digital output compatible with I2C or SPI
Power consumption: 2 uA typical when using the sleep mode option
Meets IPC/JEDEC J-STD-020D.1 humidity sensitivity level 1 requirements
RoHS and REACH compliant
Options: Internal diagnostics, liquid media, sleep mode, temperature output
Product parameters
Series Name: ABP Basic
Signal Conditioning: Amplification
Pressure range: 0 psi to 5 psi
Supply current: 5.0 mA typical
Output Digit: I2C Address: 0x28
Interface Type :RR: Dual radial barbed port, ipsilateral
Total Error Band: ±1.5 %FSS
Shock : 100 g with a duration of 6 ms
Operating Temperature: -40°C to 85°C [-40°F to 185°F]
Storage temperature: -40°C to 85°C [-40°F to 185°F]
Measurement Type: Gauge pressure
Temperature Compensation: Yes
Supply voltage: 5 Vdc typical
Transmission function: 214 times, no temperature output, no sleep mode
Response time: 0.46 ms
Package Type :D IP
Accuracy (Best Fit Line): ±0.25 %FSS
Vibration: 15 g, 10 Hz to 2 kHz
Compensated temperature range: 0°C to 50°C [32°F to 122°F]
Lifespan: At least 1 million pressure cycles
This article introduces Honeywell/Honeywell pressure sensor ABPDRRT005PG2A5 5Vdc products, if you are interested in Honeywell/Honeywell sensor, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Honeywell Sensor DPT2500U1-B
HONYWELL DPT2500U1-B Sensors DPT Series Air Differential Pressure Sensors
Honeywell's DT series of micro differential pressure transmitters are designed to measure differential or gauge pressure, and are available in a wide range of ranges as low as +/-50Pa and as high as 0-l0kPa, suitable for: VAC HVAC, Smart Building Energy...
|
|
Honeywell's value-added packaged sensor 4AV series
Hall-effect blade position sensor. Twin tower line outlet package. Current sink output
The AV vane-operated monolithic magnet position sensor works by causing the ferromagnetic blade to pass through the gap between the Hall sensor and the magnet, thereby shunting the magnetic flux away from the sensor. AV Series ...
|
|
Honeywell Industrial Gas Sensor CRIR Series
The CRIR series is a single-channel, non-dispersive infrared (NDIR) sensor. The CRIR M1 and CRIR E1 have a sensing cavity with an infrared light source at one end and a detector with a filter on the other. The light source emits a wavelength of radiation that includes a CO2 absorption band.
Filters block ...
|
|
Honeywell sensor JM1208UD4C2
Honeywell Sensors JM1208UD4C2 Cylindrical Sensors JSM8 Series
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...
|
|
Honeywell Industrial Gas Sensors Sensors
SensoriC toxic gas sensors are known worldwide for their outstanding performance, especially for the detection of exotic gases. The sensor can be built into a mini housing or comes with an adapter to be compatible with Series 4 and Series 7 products. SensoriC sensors are also available with 4 mA to 20 mA transmitter boards ...
|
|
Honeywell Sensor DPT0100U1-A
Honeywell Sensors DPT0100U1-A DPT Series Air Differential Pressure Sensors
Measuring range: 0 - 100
Output signal: 4-20mA
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy use
|
|
Honeywell Board Mount Pressure Sensors 26PC Flow-Through Series
Compensatory. Low voltage. mV output. Flowmeter. SIP。 Linearity and hysteresis: 0.35 % typ.
Pressure range: 1 psi to 100 psi
The 26PC Series miniature pressure sensor provides reliable gauge pressure sensing performance in a compact package. The sensor has proven sensing ...
|
|
Honeywell Industrial Gas Sensors AQ3 Series
High resolution, low lower detection limit. Customized low-noise circuit boards achieve high accuracy in ppb levels.
Reliable gas sensor to detect a wide range of gases: carbon monoxide (CO), nitrogen dioxide (NO2), ozone (O3), sulfur dioxide (SO2) are mainly used for environmental monitoring, ...
|
|
Honeywell Industrial Gas Sensors MICROceL and MICROpeL
MICROceL® and MICROpeL® are City Technology's smallest and most compact sensor series. These include carbon monoxide, hydrogen sulfide and certified combustible gas sensors.
This article introduces Honeywell's industrial gas ...
|
|
Honeywell/Honeywell flow sensor HAFBLF0200C4AX3
Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...
|
|
Honeywell's value-added packaged sensors SR4 series
Magnetoresistive digital position sensor. Plastic threaded sleeve encapsulation. Current sink output
The SR4 series magnetoresistive digital position sensors are housed in a 14 mm cylindrical plastic housing; It supports current sink output and DC power supply
This article introduces the Honeywell/Honeywell value-added packaged sensor SR4 ...
|
|
Honeywell Calibrated Pressure Sensor Model AG400
This model includes a pressure sensor and digital readout combination and is designed for industrial and laboratory applications. Accu-Gage offers portability, high accuracy, industrial-grade durability, and a competitive price. Accu-Gage units are also suitable for panel mounting and can be used in process lines ...
|
|
Honeywell Proximity Sensor ZS-00313-12 All-in-One
Introduction: ZS Series, All-in-One Sensor, Harsh Environment 3-Wire DC, Cylindrical, Stainless Steel, Ceramic, Normally Open Current Source Output, 12 Vdc to 32 Vdc. Environmentally protected stand-alone proximity sensor housed in a rugged stainless steel housing designed for ...
|
|
Honeywell Sensor DPT0010T1-B
HONYWELL DPT0010T1-B Sensor DPT Series Air Differential Pressure Sensor
Measuring range: 0 - 10000
Output signal: 0-10V
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover ...
|
|
Honeywell Common Process Pressure Transducers Z-Type Medium Range
Mid-range wet/wet differential pressure sensors ranging from 50 psid to 750 psid with full-scale accuracy of ±0.25%
Model Z Medium Series, Wet/Wet, Differential Pressure is a paste-on foil strain gauge transducer that accepts fluids at both ports and is capable of measuring from 50 to 750 psid ...
|
|
Honeywell/Honeywell flow sensor HAFUHH0020L4AXT
Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...
|
|
Honeywell Industrial Gas Sensor S Series
The Honeywell S-Series gas sensors mainly include CLE series and LEL series.
CLE series: Electrochemical gas sensor, which is a microfuel cell element, developed on the basis of the original oxygen sensor. Because of its low power consumption, good selectivity, high sensitivity and ...
|
|
Honeywell JSM802ED3Y Cylindrical Sensors JSM8 Series
Honeywell Sensors JSM802ED3Y Cylindrical Sensors JSM8 Series
Rated: 12VDC-24VDC
Load current: ≤100mA
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: J ...
|
|
Honeywell value-added packaged sensors SR13/SR15 series
Digital Hall-effect position sensor. Plug-in and paper-mounted housing. Current sink output
The SR13/15 series offers an improved package that allows for quick and easy sensor mounting while increasing the usability of the SS400 series. These sensors can be installed without the use of additional mounting hardware. ...
|
|
Honeywell/Honeywell flow sensors AWM43300V manifolds
Introduction: AWM40000 Series Air Mass Flow Sensors, Amplified, Flow/Pressure Range: +1000 SCCM; Interface Type: Manifold. The AWM40000 series of air flow sensors is based on proven micro-bridge technology, including unamplified sensor-only devices and amplified signal designs.
|
|
Contact
working hours
