Product Introduction: The optical communication system supports two-way communication between storage and retrieval systems, transmission vehicles, automatic guided vehicles and monorail conveyors. This is an alternative to complex and problematic cables, slip rings and other transmission solutions. The transmission between the two stations is replaced by infrared light, which is controlled by a data clock adjustment. Optical communication is suitable for a variety of buses. Data transfer replaces serial and 8-bit parallel modes.
Specifications:
Product Description | Optical data coupler for Fast Ethernet, 150 m detection range, IR lamp, 100 MBit/s data rate, M12 plug |
General specifications | Effective detection range | 0 ... 150 meters | Threshold detection range | 180 meters | light source | Laser diodes | Light | Modulated infrared light | Laser nominal rating | | | Lasers | 1M | | wavelength | 785nm | Spot diameter | 1.5 meters at a distance of 100 meters | Divergence angle | 1° | Functional safety-related parameters | MTTF d | 58.6 a | Task Time (TM) | 10 a | Diagnostic Coverage (DC) | 0％ | Indicators/means of operation | Data traffic metrics | LED Green: OPTO-Link
LED Yellow: LAN-Link
LED red: ERROR | Functional metrics | Signal Strength (8 LEDs: Red, Yellow, Green) | Electrical Specifications | Operating voltage | 18 ... 30 V DC | Data rate | 100 MBit/s (Fast Ethernet) | interface | Interface type | 100 BASE-TX | Compliance with standards and directives | Directive compliance | | | EMC Directive 2004/108/EC | EN 61000-6-2：2005; EN 60947-5-2：2007 | Standards Compliance | | | Lasers | IEC 60825-1：2007
EN 60825-1：2007 | Mechanical Specifications: | Ingress protection | IP65 | connect | 4-pin, M12x1 socket, standard (power),
8-pin, M12x1 connector, service,
4-pin, M12x1 socket, D-coded (LAN) | material | | | housing | ABS / PC | | Optical end faces | plastics |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Beijiafu NBB2-6,5M25-E2-V3 inductive sensor
Product introduction: P+F Inductive sensor NBB2-6,5M25-E2-V3 2 mm flush Longer working distance Extended temperature range -40 ... +85 °C
Specifications:
Switch function
Normally open (NO)
Output type
PNP
Rated working distance
2 mm
Installation...
|
|
P+F/Inductive sensor NBN4-12GK50-E0/E2 voltage drop ≤3V
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F capacitive sensor CBB10-30GKK-A2 10mm flush
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F/Capacitive sensor CJ10-30GM-WS current: 5~200mA
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inductive sensor NBN4-12GM50-E2-V1-Y89925
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Capacitive sensor CJ4-12GK-N 4mm non-flush
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
P+F/Reflective Plate Photoelectric Switch ML100-55/95/103 360 degree view
Product Description: Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, ...
|
|
P+F/Diffuse Reflex Mode Sensor GLV18-8-200 /115/120
Product Description: Triangulation sensor with background suppression, miniature design with multiple mounting options, best-in-class background suppressor, accurate object detection, virtually independent of color, extended temperature range.
Our customer-centric service philosophy ...
|
|
P+F Retroreflective Sensor ML100-55/95/102 5m detection range
Description: Retroreflective sensor ML100-55/95/102 photoelectric sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, light/dark, DC type, NPN output, M8 plug.
...
|
|
P+F/Through-beam photoelectric sensors LD31/LV31/73c/76a/136
Product Description: Thru-beam sensor, 30 m detection range, red light, switch-on on bright, AC/DC type, relay output, fixed cable, cost-optimized series for standard tasks, small housing for large structures, high visibility LED, universal voltage version, relay output. ...
|
|
P+F Safety Barrier Module H Series 16 slots
Introduction: The H-Series can be connected to hazardous area field devices and control systems by mounting multiple isolation barriers on terminal boards. Compared to a single interface module, the terminal block greatly simplifies wiring and saves costs. The terminal block is equipped with a sturdy plastic enclosure for quick and secure installation in the cabinet.
|
|
P+F capacitive sensor CJ40-FP-A2-P1 is non-flush mounted
Introduction: P+F capacitive sensor CJ40-FP-A2-P1 40 mm, non-flush; 4-wire DC; The switching distance can be set in a wide range by using a potentiometer. One terminal connector** can be fitted with up to two conductors with the same cross-sectional area of the core.
...
|
|
P+F/Diffuse Mode Sensor GLV18-8-450 /73/120
Product Introduction: Diffuse Mode Sensor, M18 Threaded Housing Design, Plastic Housing, Front Optical Surface, 450 mm Detection Range, Red Light, Light & Dark, DC Type, 2 PNP Outputs, M12 Plug, High Efficiency Circuit in M18 Plastic Housing, For Standard Applications, Very High Detection Range, 4 ...
|
|
P+F/Print Marker Luminescence Scanner DK50-UV-190 / 115B / 147
Product Introduction: Color is usually the distinctive feature of a product, so color recognition and reliable detection play an increasingly important role in industrial automation. The color sensors of P+F are very good and cover most applications, e.g. for fixed detection distances.
|
|
P+F/Inclination sensor INX360D-F99-U2E2-V15 range 0~360°
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/Capacitive sensor CBN5-F46-E0-Y286690 distance 5mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Through-beam photoelectric sensor LA39/LK39/31/40a/116
Introduction: P+F/Beijiafu through-beam photoelectric sensor LA39/LK39/31/40a/116 bright/dark on, switchable; Mounting accessories are available; The degree of protection is IP67. Inductive range adjuster, bright/dark switch.
Products...
|
|
P+F Inductive Sensor NBB15-30GM50-WS Quasi-flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F/KCD2-E2L sensor output interface terminal
Product Introduction: P+F Sensor Output Interface Terminal KCD2-E2L Sensor Output Interface Terminal with Wire Disconnection Monitoring[/backcolor]
Indicator/Operation Method:
Yellow LED: Switch output Wire disconnects: LED off, output locked
Electrical Technical Specifications: ...
|
|
P+F/UB120-12GM-E5-V1 connector M12
Product Introduction: The transducers used to transmit and receive sound waves are separated, so that the system does not need to wait for the signal attenuation of the transmitter, thus effectively reducing the dead zone. The direct detection type of ultrasonic sensors is available with switching and analog outputs. Direct detection of all support window mode functions ...
|
|
Contact
working hours
