Precautions for the installation and use of electric control valve - Wuzhong instrument

The commonly used medium for valve pressure test is water, oil, air, steam, nitrogen, etc., and the pressure test methods of various valves are as follows. (1) Globe valve and throttle valve The strength test of globe valve and throttle valve, usually the assembled valve is placed in the pressure test frame, the valve disc is turned over, and the medium is injected to...

The hydraulic maintenance module uses the hydraulic locking method to control the inlet and outlet oil circuits and load oil circuits of the electro-hydraulic servo valve. The module has the following three functions: 1. Locking function When the system is in normal condition, the hydraulic lock is in the guide...

Routine maintenance of pneumatic conditioning valves When the conditioning valve is packed with graphite-asbestos, lubricating oil should be added to the packing once in about three months to ensure that the conditioning valve is flexible and easy to use. If it is found that the pressure cap of the packing is very low, the packing should be compensated, such as the PTFE dry packing is found to be hardened ...

There are a total of eight functions of the conditioning valve, and the eight functions of the full-function ultra-light conditioning valve are excellent, so it is called "full-function valve". 1. The conditioning function is one of the main functions of the conditioning valve, which is manifested as (1) flow characteristics; (2) Adjustable ratio R; ...

The control valve, also known as the control valve, is a device in the field of industrial automation process control that uses power operation to change the process parameters such as the flow, pressure, temperature, and liquid level of the pipeline medium.

G2010 ball valve for long-distance pipeline is designed for the transportation of long-distance pipeline media, which is a typical long-distance pipeline ball valve, which is suitable for various oil, natural gas, city gas pipelines, and can also be used in the equipment of general chemical products. The valve is completely in line with the United States Petroleum Institute API in terms of performance...

(1) Under normal circumstances, the valve is not tested for strength, but after repair, the valve body and bonnet or the valve body and bonnet damaged by corrosion should be tested for strength. For safety valves, their constant pressure and return pressure and other experiments should be in accordance with their instructions and the rules of the relevant procedures. ...

Features of Gate Valve: Light weight: The body is made of high-grade ductile iron, and the weight is about 20%-30% less than that of the traditional gate valve, and the device is easy to repair. Flat-bottomed gate seat: The traditional gate valve is often washed by water and the pipe is due to foreign objects such as stone, wood, cement, iron filings, etc.

1. The sealing surface is uneven and cannot constitute a sealing line: 2. The connection between the valve stem and the closure is suspended, irregular or worn; 3. The valve stem is tortuous or the assembly is not correct, so that the closure is skewed or mismatched: Fourth, the sealing surface raw materials are not selected properly or not according to the working conditions.

1. The valve position of the electric actuator is lost: 1) Battery power is lost When the incremental encoder is selected to measure the stroke, it is necessary for the fulfillment mechanism to have a battery as an auxiliary power supply, the AC power supply disappears, and the change of the valve position of the electric actuator can still be detected by the incremental encoder.

The valve is a control component in the fluid transportation system, which has the functions of shut-off, conditioning, diversion, preventing backflow, stabilizing pressure, diverting or overflowing pressure relief. Valves for fluid control systems, from the simplest shut-off valves to the most chaotic valves used in automated control systems, range from ...

The shut-off valve is a kind of actuator in the automation system, which is composed of a multi-tension spring pneumatic membrane actuator or a floating piston actuator and a regulating valve, which receives the signal of the regulating instrument and controls the blocking, switching or switching of the fluid in the process pipeline. It has a simple structure, sensitive response, and ...

The active circulation valve is a pump protection device. It actively protects the centrifugal pump (especially the hot water medium) from partial cavitation damage and instability that may occur in the pump body when operating at low load. Once the pump flow rate falls below the preset flow, the bypass is completely opened to ensure that the pump needs a small flow rate. Namely...

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. 1. The double blocking and discharge function of the turbine fixed ball valve: the turbine ball valve is fixed by using the tension spring preload floating valve seat, when the valve is in two different states of full open and fully closed, the flow ...

(1) The dispatching valve belongs to the on-site dashboard, and the standard working temperature should be in the field of -25-60 °C, and the air humidity should be ≤ 95%. If it is installed outdoors or in a high-temperature place, moisture-proof and temperature-reducing measures should be used. In areas where there is an epicenter, it is necessary to eradicate the source of vibration or improve vibration isolation measures. ...

1. The safety valve should have the equipment to prevent the hammer from moving by itself and the guide frame to limit the lever from deviating, and the spring-type safety valve should have the equipment to raise the handle and prevent the adjustment screws from being twisted at will. 2. It should be installed straight in the pot merchant, the container ...

Classification of valves, types of structures, functional applications, pressure levels, temperature classifications, valve body data classifications, and general classifications The types of valve products are complex, and the statements are inconsistent, some are divided according to the use (such as chemical valves, oil valves, oilfield valves, power station valves, etc.), and some are according to the medium.

The angular displacement of the valve position detected by the valve limit switch box changes the transmission shaft through the coaxial adjacency or the reaction rod, so that the cam touches the miniature switch, so that the contact of the switch assembly is closed or disconnected, and the switching signal is transmitted to the outside through the terminal, and the passer is displayed on the spot. ...

Valve application requirements (1) General gate valves, ball valves, and globe valves are prohibited from regulating according to their structural characteristics. However, in process design, it is commonly used for mediation. Due to the conditioning application, the valve seal has been in a saving state for a long time, and the impurities in the oil have washed the seal, damaging the seal.

Classified by role and use (1) Shut-off valve: The shut-off valve, also known as the closed-circuit valve, has the effect of turning on or cutting off the medium in the pipeline. Shut-off valves include gate valves, globe valves, plug valves, ball valves, butterfly valves and diaphragms. (2) Check valve: Check valve is also known as check valve or check valve.