Wuzhong instrument valve classification, two of which are introduced

The angular displacement of the valve position detected by the valve limit switch box changes the transmission shaft through the coaxial adjacency or the reaction rod, so that the cam touches the miniature switch, so that the contact of the switch assembly is closed or disconnected, and the switching signal is transmitted to the outside through the terminal, and the passer is displayed on the spot. ...

The mechanical deflection angle of the movable part of the surface can be measured and converted, and the size to be measured is directly indicated by the indicator, so it is also called the direct-reading appearance. According to the working principle, the indication surface can be divided into magnetoelectric system appearance, electromagnetic system appearance, electric system appearance and ...

1. Confirm the selection criteria (1) Process fluid conditions: fluid name, flow rate, inlet and outlet pressure, pressure difference during normal operation, pressure difference when valve is closed, fluid temperature, specific gravity, viscosity, whether there are suspended solids, fibrous, muddy, etc. Sometimes it is possible to part with the most ...

The process of shell experiments and seal experiments done by turbine fixed ball valves in some artificial environments is as follows. Double blocking and discharge function of turbine fixed ball valve: the turbine ball valve is fixed by using tension spring preload float valve seat, when the valve is in two different states, full open and fully closed, the fluid is ...

1. Before the device, check whether the valve has notched parts, whether the type is correct, whether there are debris in the valve body, and whether the muffler is blocked. 2. Close the valve and cylinder. 3. Device the cylinder on the valve, the direction of the equipment is parallel or straightened with the valve body, and check whether the screw holes are aligned.

　　First, the effect of pipeline identification Why do you need to do pipeline identification? Intent: To facilitate the identification of substances in industrial pipelines, ensure safe production, and avoid misjudgment in operation and equipment maintenance. Carry out ...

The stem axis of the globe valve is perpendicular to the seat sealing face. The relatively short open or closed stroke of the valve stem and the very reliable blocking action make this valve very suitable for the blocking or adjustment of the medium and the economical application. ...

A few days ago, in a large digital workshop of Wuzhong Instrument Co., Ltd., the operators were working carefully. Every day, tens of thousands of parts orders are sent from dozens of sales outlets across the country such as Guangzhou and Hainan, and nearly 200 pieces of equipment in the workshop are processed and produced. 　　Because of the working conditions ...

Nuclear power valves are essentially the same as those used for thermal power generation, with gate valves mainly used for high-pressure large-diameter piping, butterfly valves for low-pressure large-diameter piping, and most of the auxiliary piping for small-diameter shut-off valves or angle globe valves. Check valves, safety valves and control valves etc. are also related to other collar valves.

1. Pneumatic valves include conditioning valves and blocking valves, the effect of the two is different, although the flow rate of the conditioning valve can also be adjusted to 0, but the blocking valve is generally used for urgent blocking, and the valve positioner is generally a cylinder valve. The conditioning valve is with a pneumatic membrane and a large disc, in addition to being able to ...

1. Why does the double-seat valve vibrate briefly during small opening operation For a single core, when the medium is a flow-open type, the valve has good stability; When the medium is a flow-closed type, the stability of the valve is poor. The double-seat valve has two spools, the lower spool is in the flow closed and the upper spool is in the flow open, so that in the small opening ...

　　Selection: The butterfly plate of the butterfly valve is installed in the diameter direction of the pipe. The butterfly valve has a simple structure, small size, light weight, only a few parts, and only needs to rotate 90° to quickly open and close, the operation is simple, and the ...

The hydraulic maintenance module uses the hydraulic locking method to control the inlet and outlet oil circuits and load oil circuits of the electro-hydraulic servo valve. The module has the following three functions: 1. Locking function When the system is in normal condition, the hydraulic lock is in the guide...

Features of Gate Valve: Light weight: The body is made of high-grade ductile iron, and the weight is about 20%-30% less than that of the traditional gate valve, and the device is easy to repair. Flat-bottomed gate seat: The traditional gate valve is often washed by water and the pipe is due to foreign objects such as stone, wood, cement, iron filings, etc.

1. Glander type This is the form that is used a lot. The same form can be different in many details. For example, in terms of hold-down bolts, it can be divided into T-bolts (for low-pressure valves with a pressure of ≤ 16 kg/cm²), stud bolts and loose joints. From the gland point of view, it can be divided into integral and ...

When the gate valve is closed, the sealing surface can only rely on the medium pressure to seal, that is, only rely on the medium pressure to press the sealing surface of the ram to the valve seat on the other side to ensure the sealing of the sealing surface, which is self-sealing. Most gate valves are forcibly sealed, that is, when the valve is closed, it is necessary to rely on external force to forcibly ...

1. The valve position of the electric actuator is lost: 1) Battery power is lost When the incremental encoder is selected to measure the stroke, it is necessary for the fulfillment mechanism to have a battery as an auxiliary power supply, the AC power supply disappears, and the change of the valve position of the electric actuator can still be detected by the incremental encoder.

The commonly used medium for valve pressure testing is water, oil, air, steam, nitrogen, etc., and the pressure testing methods of various valves are as follows. (1) Globe valve and throttle valve For the strength test of globe valve and throttle valve, the assembled valve is usually placed in the pressure test frame, the valve disc is opened, and the medium is injected into the ...

Pneumatic butterfly valves are usually composed of a combination of pneumatic actuators and valve bodies and some accessories after debugging. This article first introduces the precautions for the on-site application of pneumatic butterfly valves. 1. The control cabinet sends a signal that the valve does not move, and the pneumatic conditioning butterfly valve is in the device locator after on-site investigation.

Valve is a device used by Gongliang to control the direction, pressure and flow of fluid in the fluid system. A valve is a device that allows the flow or suspension of the medium (liquid, gas, powder) in the piping and equipment, and can control its flow. The valve is a controlling part in the pipeline fluid delivery system, ...