Turck Information SHOW

	Causes and solutions for unstable output signals of photoelectric sensors – Turck The following conditions may cause the output signal of the photoelectric sensor to detect the object is unstable: (1) The power supply is abnormal; (2) The detection frequency is too fast; (3) the size of the measured object; (4) The measured object is not in the stable detection area of the sensor; (5) Electrical interference. ...
	Introduction to piezoresistive pressure sensors – Turck What is the principle of piezoresistive pressure sensors? Piezoresistive sensors refer to sensors made of the piezoresistive effect of monocrystalline silicon materials and integrated circuit technology. After the monocrystalline silicon data is subjected to the action of force, the resistivity changes, and the proportional force can be obtained according to the measurement circuit.
	Displacement sensor parameters – Turck sensors 1. Technical indicators in terms of activation: for an instrument, generally the higher the degree of activity, the better, because the more active, the easier it is to feel the change in acceleration in the surrounding environment, the acceleration changes greatly, and naturally, the change of output voltage also becomes larger accordingly, ...
	The correct way to use linear position sensors – Turck A linear displacement sensor is an electrical signal device that converts linear mechanical displacement into a linear or arbitrary function relationship through a potentiometer element. The potentiometer planned to complete the measurement of displacement intent must require a confirmation relationship between the change in displacement and the change in resistance. So so...
	Angular displacement sensor in action – Turck The sensor uses a specially shaped rotor and wire-wound coil to simulate the linear displacement of a linear variable differential transducer (LVDT), which has high reliability and functionality, and the rotary motion of the rotor shaft produces a linear output signal that moves around the factory-preset zero position ± 60 degrees (120 in total). This...
	Principle of angular displacement sensors – Turck The angular displacement sensor is a model of displacement sensor that uses a non-touch patent plan to effectively improve long-term reliability compared to other traditional angular displacement gauges such as synchronous analyzers and potentiometers. Its unique planning does not require the use of slip rings, blades, touch cursors...
	Material classification for displacement sensors – Turck sensors (1) Conductive plastic displacement sensor Conductive plastic displacement sensor uses a special process to coat the DAP (didipropylphthalate) resistance paste on the insulating body, heat and polymerize to form a resistance film, or press the DAP resistance powder thermoplastic into the groove of the insulating matrix to form a solid body as a resistor.
	Performance indicators for industrial sensors – Turck In modern industrial production, especially in the process of automated production, it is necessary to use various sensors to monitor various parameters in the production process, so that the equipment is in normal or optimal condition, so that the product can reach the best quality. Therefore, it can be said that if there are many excellent sensors, modern ...
	Displacement sensor application area – Turck 1. The application of displacement sensor in the shield machine In the tunnel construction equipment, the structural characteristics and supporting facilities of different forms of shield machines are also different. In some messy shield machines, the functions of the shield machine are systematic and diversified. Including: mechanical, hydraulic, ...
	What is an SOI high-temperature pressure sensor – Turck Pressure sensor is a kind of equipment used to detect pressure signals and convert pressure signals into electrical signals according to certain rules, which are widely used in various production, industry and aerospace fields. With the subdivision of application fields, the pressure in high-temperature and harsh environments such as high-temperature oil wells and various engine cavities ...
	Requirements for the use of linear displacement sensors – Turck A linear displacement sensor is an electrical signal device that converts the linear mechanical displacement into a linear or arbitrary function connection through the potentiometer element. In order to achieve the purpose of measuring displacement, the potentiometer must require a confirmed link between the change in displacement and the change in resistance. So so...
	Common troubleshooting for proximity sensors – Turck (1) Stable power supply to the proximity sensor separately; (2) the response frequency is in the extra range; (3) There is jitter in the process of object detection, resulting in exceeding the detection area; (4) Multiple probes are tightly connected to each other; ...
	Composition and classification of sensors – Turck 1. Composition of the sensor A sensor typically consists of a sensitive element, a conversion element, and a basic conversion circuit, as shown in Figure 1. A sensitive element is an element that can sensitively feel the scene being measured and respond to a definite relationship; The conversion element is to convert the measured touch of the sensitive element into ...
	Introduction to laser displacement sensors – Turck 1. What is a laser displacement sensor? Laser displacement sensors are sensors that use laser skills to measure. It consists of a laser, a laser detector, and a measurement circuit. Laser sensors are the new type of measurement. Able to accurately measure the orientation and displacement of the measured object without touch...
	Precautions for sensor use – Turck sensors Precautions 1, in the use of the sensor to prevent contact with some corrosive or overheated media, this point is very important, if we do not pay attention to this point when using the sensor, it will affect the relevant use of the sensor. Note 2: In ...
	The pressure sensor is selected with an internal factor in mind – Turck When selecting a pressure sensor, it is necessary to consider the internal elements of the sensor. One of the many questions we often encounter in industrial production projects is what type of sensor should we choose, the characteristics of the sensor, the scale and the data requirements? Let's dissect exactly ...
	The communication of the Lizhun Sensing digital transmitter uses the communication interface - Turck The communication interface of the digital transmitter of Lizhun sensing is selected, and the special interface is selected. The handling RT module enables HART communication with the transmitter. Digital Combined Pressure/Differential Variable is a multi-functional digital intelligent instrument developed by JIAKE, including capacitive pressure/differential pressure transmitter and direct combined pressure/differential pressure.
	Turck temperature and humidity online monitoring sensor Turck presents sensors for online monitoring of temperature and air humidity for online monitoring of the Industrial Internet of Things and sensor-to-cloud use. Composite air humidity/temperature sensor for field or industrial IoT ...
	Differential pressure sensor applications – Turck A differential pressure sensor is a sensor used to measure the difference between two pressures, and is generally used to measure the pressure difference between the front and rear ends of a certain equipment or component. Typical Applications: It is used to measure the exhaust particle trap (DP ...
	Force Alignment Sensors for Bridge Data Detection – Turck The bridge viewing method is to use the sensor to perceive the physical quantity of the measured object, convert the perception signal into a telecommunication signal output according to the fixed law, collect the electrical signal of the sensor with the active collection equipment, transmit the data to the remote server through the wireless data transmission module, complete the information processing, storage...
	Common faults in pressure sensors – Turck The first is pressure, and the transmitter can't afford to lose it. In this case, check if the pressure connector is leaking or clogged, if not, check the wiring method and check if the power supply is normal, the brief pressure to confirm if the output has changed, or if there is an output at the zero point of the sensor ...