Honeywell Sensor DPT1000U1-B

Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize on-board application-specific integrated circuits (ASICs) to provide significant impact on sensor bias, sensitivity, temperature effects, and ...

Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...

Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Introduction: The AWM5000 Series Microbridge Mass Flow Sensors feature a venturi flow housing. This series measures airflow of up to 20 standard liters per minute (SLPM) while generating a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the airflow, which greatly ...

Sensor: DPT series air pressure differential sensor All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance FeaturesSpecificationsSupply Voltage (Voltage Type)12 30 Vac/Vdc Supply Voltage( ...

5,08 mm [0.2 in] diameter disc, adjacent leads, uncoated. -60°C to 150°C [-76°F to 302°F] The 143 series thermistors are available in a wide range of custom resistance values. The pins are not insulated. Tape and reel packaging are also available. Dissipation constant in still air: 4.0 ...

Introduction: The MLH series of heavy-duty pressure sensors combine application-specific integrated circuit (ASIC) technology with dielectric isolation and metal diaphragm design. This digitally compensated sensor has some value and performance that makes it an appropriate pressure sensing solution for demanding uses. Industry standard electrical connections ...

Operates in shock, vibration, moisture and corrosion conditions. Custom kits for a wide range of gas, liquid, and solid temperature sensing are available. These enhanced and responsive sensors are typically used to sense air, liquid immersion, and solid surface temperatures. Depending on the customer's application requirements, Honeywell's ...

Hall-effect digital (unipolar or latched) or linear sensors. Aluminum or stainless steel threaded package The 103SR Series Hall-Effect Position Sensor Assembly is sealed in an aluminum or stainless steel threaded housing and meets the requirements of NEMA 3, 3R, 3S, 4, 4X (stainless steel housing), 12, and 13 ...

Introduction: The AWM5000 Series Microbridge Mass Flow Sensors feature a venturi flow housing. This series measures airflow of up to 20 standard liters per minute (SLPM) while generating a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the airflow, which greatly ...

The 1 Series analog gas sensor is a compact and slim sensor with proven City Technology. The service life of these sensors has been extended by five years, and the operating temperature and humidity range has been significantly expanded. Can be used for a wider range of environmental conditions changed to "can be used for more ...

100 Ω or 1000 Ω platinum resistance temperature sensor (RTD). -75°C to 500°C, TFE Teflon or fiberglass alumina tubing with leads The HEL-700 series of thin-film platinum RTDs (Resistance Temperature Sensors) are designed to monitor critical temperatures in industrial applications. They mention ...

Introduction: The AWM90000 series of mass flow sensors feature time-proven thermal bridge technology. The AWM90000 Series offers many of the benefits of the AWM1000 Series in a more cost-effective platform. Available in both mass flow and differential pressure versions.

The CRIR series is a single-channel, non-dispersive infrared (NDIR) sensor. The CRIR M1 and CRIR E1 have a sensing cavity with an infrared light source at one end and a detector with a filter on the other. The light source emits a wavelength of radiation that includes a CO2 absorption band. Filters block ...

Non-amplified. Absolute, gauge, vacuum gauge. Wetted parts: 316L SS; Pressure range: 0 psi to 3 psi to 0 psi to 500 psi. Ribbon cable terminals Honeywell's stainless steel 19C, 19U and 19 gauge series sensors are designed for applications that require ...

High accuracy, compensated/amplified, ±6 mbar to ±12 bar. ± 600 Pa to ±1.2 Mpa and ±2 inH2O to ±175 psi. Digital output, compatible with liquid media The BP2 series is a piezoresistive silicon pressure sensor that can be used in a specified full-scale pressure range and temperature range.

A large number of ranges. Wet/wet, differential pressure. 17-4 PH Stainless Steel Wetted Material, 1,000 psid to 10,000 psid, 4 mA to 20 mA Output, Two-Wire (Standard) The Model 911FMD High Range Stainless Steel Wet/Wet Differential Pressure Sensor is designed for harsh industrial applications.

Description: AWM3000 Series Air Mass Flow Sensors, Amplified, Flow/Pressure Range: +200 SCCM; Straight port type. Like the AWM2000 Series, the Whiston Twin Bridge controls gas flow measurement. AWM3000 series is enlarged; Therefore, the series can be used to increase the ...

Description: The 24PC SMT (Surface Mount Technology) series of pressure sensors provides a low-cost, high-value, compact pressure sensing solution for printed circuit board (PCB) use. Based on the consistent reliability and accuracy of the 26PC pressure sensor, the 24PC SMT pressure sensor can be used in ...

Heavy Duty Media Isolated Pressure Sensors: 1 bar to 12 bar, 15 psi to 175 psi The MIP series offers heavy-duty media-isolated pressure sensors in a compact stainless steel construction capable of working with a wide range of media, including corrosive liquids and water. The MIP series is capable of performing in harsh ...