Honeywell Sensor DPT1000U1-A

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Miniature glass probe. -60°C to 300°C [-76°F to 572°F] The 120 Series and Thermistors are shock-resistant, rugged, glass-sealed devices that are typically suitable for immersion in liquids and can be easily installed in air sensor assemblies. Also included is a standard glass probe configuration (12 ...

Introduction: The AWM5000 Series Microbridge Mass Flow Sensors feature a venturi flow housing. This series measures airflow of up to 20 standard liters per minute (SLPM) while generating a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the airflow, which greatly ...

Introduction: ZS Series, All-in-One Sensor, Harsh Environment 3-Wire DC, Cylindrical, Stainless Steel, Ceramic, Normally Open Current Source Output, 12 Vdc to 32 Vdc. Environmentally protected stand-alone proximity sensor housed in a rugged stainless steel housing designed for ...

The Series 3 is City Technology's oldest family of gas sensors. A wide range of sensors have evolved from this series and are available with 4mA to 20mA and mV transmission boards. The Series 7 is an upgrade to the series. This article introduces the Honeywell/Honeywell ...

Operates in shock, vibration, moisture and corrosion conditions. Custom kits for a wide range of gas, liquid, and solid temperature sensing are available. These enhanced and responsive sensors are typically used to sense air, liquid immersion, and solid surface temperatures. Depending on the customer's application requirements, Honeywell's ...

MICROceL® and MICROpeL® are City Technology's smallest and most compact sensor series. These include carbon monoxide, hydrogen sulfide and certified combustible gas sensors. This article introduces Honeywell's industrial gas ...

Introduction: Honeywell HumidIcon Digital Humidity/Temperature™ Sensor, HIH6100 Series, Digital Output Type Relative Humidity (RH) and Temperature Sensor in one package. The sensor provides an accurate ±4.0 %RH level, as well as a temperature level of ±0.5 °C. ...

Honeywell Sensors JM1204UD1C2 Cylindrical Sensors JSM8 Series Rated: 12VDC-24VDC Load current: ≤100mA Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: ...

Full range of industrial-grade sensors: media-isolated design, multiple ports, electrical configurations, and outputs ranging from 0 psi to 250 psi. Our sensing element design consists of four piezoresistive elements placed on a chemically etched silicon diaphragm. The change in pressure causes the diaphragm and the built-in electrical ...

Medium range. Wet/wet, differential pressure. 17-4 PH stainless steel wetted material. Accuracy: 0.25% FS; Range: 50 psid to 750 psid. The Model 911FMD Medium Range Stainless Steel Transmitter is made of 17-4 PH stainless steel wetted parts and is hermetically sealed for use in hazardous environments.

Introduction: The AWM700 series microbridge mass flow sensors enable coaxial flow measurement with a specially designed bypass flow housing. The sensor can measure flow rates up to 200 standard liters per minute (SLPM) while typically generating a pressure drop of 1 in H2O. The AWM700 features ...

Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...

Summary: The SSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the circuit board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Hall-effect digital (unipolar or latched) or linear sensors. Aluminum or stainless steel threaded package The 103SR Series Hall-Effect Position Sensor Assembly is sealed in an aluminum or stainless steel threaded housing and meets the requirements of NEMA 3, 3R, 3S, 4, 4X (stainless steel housing), 12, and 13 ...

Summary: The SSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the circuit board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

General Purpose Gauge/Absolute-Pressure Transducer with a pressure range of 0.5 psig to 60,000 psig (absolute) and ±0.10% full-scale accuracy The model TJE pressure sensor is an all-welded stainless steel sensor designed for harsh industrial applications where accuracy and measurement stability are critical.

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Introduction: The MLH series of heavy-duty pressure sensors combine application-specific integrated circuit (ASIC) technology with dielectric isolation and metal diaphragm design. This digitally compensated sensor has some value and performance that makes it an appropriate pressure sensing solution for demanding uses. Industry standard electrical connections ...

Large, hermetically sealed glass bulbs with adjacent leads. -60°C to 300°C [-76°F to 572°F] The 112 series thermistors are hermetically sealed in glass. They are designed for economical and general purpose temperature measurement and control applications. After applications for applications at 300°C (572°F ...