OMRON Laser Sensor ZX1-LD50A61 DC10~30V

Features:

0.002mm resolution, suitable for simple measurements.

The measurement results are stable and suitable for any type of workpiece.

A wide range of models with a total of four different distance sizes.

Long-range models up to 1,000 mm.

　　Product parameters

Model	NPN output	ZX1-LD50A61 ZX1-LD50A66	ZX1-LD100A61 ZX1-LD100A66	ZX1-LD300A61 ZX1-LD300A66	ZX1-LD600A61 ZX1-LD600A66
project	PNP output	ZX1-LD50A81 ZX1-LD50A86	ZX1-LD100A81 ZX1-LD100A86	ZX1-LD300A81 ZX1-LD300A86	ZX1-LD600A81 ZX1-LD600A86
Measuring range		50 ± 10 mm	100 ± 35 mm	300 ± 150 mm	600 ± 400 mm
Light source (wavelength)		Visible light diode laser (Wavelength: 660nm, 1mW or less, IEC/EN2, FDA2 *1))
Spot Diameter (Typical) (Defined at the distance from the measurement center) *2		φ0.17mm	φ0.33mm	φ0.52mm	φ0.56mm
Supply voltage		DC10~30V, including 10% corrugation (p-p)
Current consumption		250mA or less (when the supply voltage is 10 VDC)
Control the output		Load power supply voltage: DC30V or less, load current: 100mA or less (Residual voltage: 1V or less (load current 10mA or less), 2V or less (load current 10~100mA))
Analog output		Current output: 4~20mA, maximum load resistance: 300Ω
function		Smart Adjustment/Hold Function/Zoom Setting/Background Removal/OFF-Delay Timer/ON-Delay Timer/ Single Trigger Timing/ON/OFF-Delay Timer/Zero Reset/Zone Output/ECO Mode/ Hys width variable/initial value setting
Light		Digital display (red), output indicator (OUT1, OUT2) (orange), Zero Reset Indicator (Orange), Menu Indicator (Orange), Laser ON Indicator (Green) and Smart Tuning Indicator (Blue)
Response time	Judge the output	Ultra-high-speed (SHS) mode: 1ms High-speed (HS) mode: 10ms Standard (STND) mode: 100ms
	Laser OFF input	200 ms max.
	Zero-reset input	200 ms max.
*Temperature characteristics 3**		0.03% F.S./°C			0.04% F.S./°C
*Linearity 4**		±0.15% F.S.		±0.25% F.S.	±0.25% F.S. (200～600mm) ±0.5% F.S. (Full Range)
*Resolution 5**		2 μm	7 μm	30 μm	80 μm
Use ambient illumination		Illuminance of the light-receiving surface: Less than 7,500lx (incandescent)		Illumination of the lighted surface: Less than 5,000lx (incandescent)
Ambient temperature		Operating: -10~+55°C, Storage: -15~+70°C (no icing, condensation)
Ambient humidity		Working and storing: 35%~85% (no condensation)
Withstand voltage		AC1,000V， 50/60Hz， 1min
Vibration Resistance (Damage)		10~55Hz, 1.5mm double amplitude, 2 hours in each direction of X, Y and Z
Impact Resistance (Vandalism)		500m/s2, 3 times in each direction of X, Y and Z
*Protection level 6**		IEC 60529, IP67
*Connection method 7**		Conductor lead type (standard cable length: 2m, 5m) Connector relay type (standard cable length: 0.5m)
quality (Packing Status/ Sensors only)	Lead-out type (2m)	Approximately 240 g / approximately 180 g		Approximately 270 g / approximately 210 g
	Lead-out type (5m)	Approximately 450 g / approximately 330 g		Approximately 480 g / approximately 360 g
	Connector Relay Type (0.5m)	Approximately 170 g / approximately 110 g		Approximately 200 g / approximately 140 g
Material		Housing & Cover: PBT (Polybutylene Terephthalate Resin), Lens Part: Glass, Cable: PVC, mounting hole parts: SUS303 PVC, Mounting hole part: SUS303
annex		Guidance Sheet and Laser Warning Label