Features of Turck's RFID technology

Photoelectric switch is the abbreviation of photoelectric proximity switch, which uses the detection object to block or reflect the beam, and the circuit is turned on by the synchronous loop, and then the presence or absence of the object is detected. Objects are not limited to metal, and all objects that reflect (or block light) can be detected. Light...

Turck has expanded its connector portfolio with the new TXL and TEL series now available in straight or elbow M8 and M12 connectors. In order to meet the different needs of users, we can supply three-pin, four-pin, five-pin straight or elbow plugging ...

The Ethernet I/O module TBEN-LL-4RMC offers four Interroll EC5000 drum motor drive interfaces, which can control up to 48 motors and is capable of driving special motors up to 48V. In addition, the module provides 4 digital input channels and 4 general-purpose digital channels ( ...

The selection of displacement sensors should meet the requirements of the following objectives: 1. Technical objectives in terms of sensitivity For an instrument, the higher the sensitivity, the better, because the more sensitive, the simpler the change in the acceleration generated by the surrounding environment will be, and the acceleration ...

Sensitive components Load cell: A component that directly senses the measured (mass) and outputs other quantities that are definitely related to the measured amount. For example, the elastomer of the resistance strain gauge load cell is to transform the mass of the measured object into deformation; The elastomer of the capacitive load cell will be tested ...

When selecting a pressure sensor, it is necessary to consider the internal elements of the sensor. One of the many questions we often encounter in industrial production projects is what type of sensor should we choose, the characteristics of the sensor, the scale and the data requirements? Let's dissect exactly ...

1. The equipment itself generally does not need daily maintenance, in the event of obvious problems, please do not open it for self-repair, and contact the manufacturer as soon as possible! 2. In principle, the electrode should be calibrated before each measurement, and the electrode should be calibrated regularly for long-term use. ...

It is difficult to measure torque on a continuously rolling axis, and there are several ways to do it. The most common method is to derive the torque from the energy required by the rolling shaft. In general, this means measuring the current of the motor that drives the rolling shaft. Although this is simple but inaccurate, it is caused by ...

　　Old model New model BL67-16DO-0.1A-P MC 0116 0101 　　BL 67-1RS232 MC 2501 0000 　　BL 67-1RS485/422 ...

1. Understand the circuit principle and determine the maintenance plan: when the electrical system of a piece of equipment is defective, do not rush to disassemble it, first of all, it is necessary to understand the phenomenon, process, planning and cause of the defect of the electrical equipment. Understand the fundamental operating principle of the equipment and electrical system, and analyze the ...

Assuming that the power supply is normal, it is necessary to carry out simple pressurization to see if the output has changed, perhaps to observe whether the zero position of the sensor has output, assuming that it has not changed, the sensor has been damaged, and vice versa, it is the appearance of the damage or other links of the whole system. ...

Choose a modular principle instead of a static line Turck's compact IP67 marginal controllers or block I/O modules enable distributed control of logistics plant processes. These autonomous modules can be used via Profinet, Ethernet/IP or Modbus TCP with multiprotocol Ethernet ...

In daily operations, we often encounter the use of temperature sensors, thermocouples and RTDs are used as temperature sensing components, but their principles and functions are different. What are the differences? ...

First, the sensor industry The national standard GB7665-87 defines the definition of sensors as follows: "A device or equipment that can sense the rules and be measured and converted into usable signals according to certain rules, usually composed of sensitive elements and conversion elements". A sensor is a detection device that can ...

TBEREN-L PLC is the most advanced IP67 industrial controller, which integrates the function of CODESYS PLC, which can complete cloud connection and industrial Ethernet communication together. The new dual MAC address mode makes this powerful controller even more powerful after ...

1. The AC contactor can be used as a substitute for the DC contactor in an emergency, and the suction time can not exceed 2 hours (due to the poor heat dissipation of the AC coil than the DC, which is determined by their different structures).

Turck presents the new Q130WD uprox sensor with washout resistance. Designed to meet the needs of the food and beverage industry, the rectangular proximity switch has a high degree of protection (IP68/IP69K) and can be used in many applications to monitor the production flow of beverages and food cans. ...

Turck's proximity sensors, also known as contactless proximity switches, are ideal electronic switching sensors. When the metal detector is close to the sensing area of the switch, the switch can be contactless, pressure-free, non-sparking, and issue electrical commands, accurately reflecting the position and stroke of the moving mechanism, even if it is used for a ...

Filters used for suppressing sensor noise require the following conditions. ●Power or signal lines required for equipment operation ●Noise that causes maloperation OneChip sensors come in many varieties and names, and the filters needed to target the noise that constitutes malfunction ...

Launch of the LUS211 ultrasonic level sensor, Turck's first ultrasonic sensor with a local LED display. The LUS211 is a programmable sensor for measuring solids and liquid levels in housings. Because...