Turck's Q130WD uprox proximity sensor

Create Date: 2024-8-30 12:03:23|Source: TURCK/TURCK

Turck presents the new Q130WD uprox sensor with washout resistance. Designed to meet the needs of the food and beverage industry, the rectangular proximity switch has a high degree of protection (IP68/IP69K) and can be used in many applications to monitor the production flow of beverages and food cans.

The Q130WD is ideally suited for the inspection of aluminium and tin cans thanks to Turck's state-of-the-art uprox technology, which has the same large switching interval for all metals. Thanks to its long travel, the sensor is also suitable for backlash-free detection of all standard beverage and food cans. The Q130WD switches at 250 Hz and can detect up to 900,000 cans per hour*.

The Q130WD housing is made of FDA-approved plastic and is highly resistant to all common acid and alkali cleaning agents. The inductive sensor also operates reliably in the ambient temperature range of -30 to 85 °C. The switching signal and operating voltage monitoring are planned as angular LEDs, so they can be viewed from any viewpoint. The Factor 1 sensor has a rectangular layout, suitable for a flush unit, and a height of 40 mm, which makes it ideal for use with typical aluminium rails.

More on that

	Features of Turck's pressure sensors: Turck's pressure sensors have good machining and heat treatment functions and have high compressive strength. Affected by the characteristics of low temperature, the correct selection of elastic sensitive components and strain gauge bridges is an important way to improve the strain gauge sensor: 1. High measurement range light accuracy, force sensing ...
	Laser displacement sensor selection method – Turck 1. Pay attention to the structure and data of the measured object, and the measurement of the general laser displacement sensor requires a complete triangular optical path. If the object to be measured has deep grooves or messy appearance, the triangular light path may be obstructed, making it impossible to measure. There are also some light-absorbing materials, such as black rubber and other materials, most of the light intensity will be ...
	Turck LUS ultrasonic level sensors Launch of the LUS211 ultrasonic level sensor, Turck's first ultrasonic sensor with a local LED display. The LUS211 is a programmable sensor for measuring solids and liquid levels in housings. Because...
	Introduction to the types of flow sensors – Turck Flow is an important parameter in industrial production, in the process of industrial production, many raw materials, semi-finished products, and finished products are presented in a fluid state. The flow rate of the fluid has become the key to determining the composition and quality of the product, and it is also an important basis for production cost accounting and rational use of energy. Thus...
	5 common pressure sensors – Turck sensors 1. Piezoresistive force sensor: Resistive strain gauges are one of the first components of piezoresistive strain transducers. The operating principle of metal resistance strain gauge is the phenomenon that the resistance value of the strain resistance adsorbed on the matrix data changes with mechanical deformation, which is commonly known as the resistance strain effect. ...
	The cause of signal distortion measured by the sensor is Turck In what ways does the signal fail to manifest Allah? Why is the signal unstable? Generally, the output signal is unstable due to transient temperature changes that cause the bias voltage to fluctuate and fluctuate. How to deal with it? A sensor with a stable bias voltage is used for processing. ...
	Range and accuracy of load cells – Turck 1. The scale of the sensor: (1) In normal use (static test or quasi-static test, the frequency of use is not high), the scale of the sensor should be selected to consider the force value of the measurement, but also to consider the weight of the auxiliary thing (test fixture) and so on.
	Choice of temperature sensors – Turck (1) Whether the temperature of the measured target needs to be recorded, alarmed and automatically controlled, and whether it needs to be measured and transmitted at a distance. (2) The size and accuracy of the temperature measurement range. (3) Whether the size of the temperature measuring element is appropriate. (4) Tested ...
	Static properties of sensors – Turck The static characteristics of a sensor refer to the correlation between the output and input of the sensor for the static input signal. Since neither the input nor the output is moment-independent, the relationship between them, i.e., the static properties of the sensor, can be used as an algebra without the moment variables.
	TURCK teaches capacitive sensors Turck's BCT sensors feature teachable pushbuttons and LEDs at the rear of the body for maximum user convenience. Turck is presenting a new generation of capacitive sensors from the BCT series, which are primarily used for level detection. Use...
	Turck presents IO-Link-enabled pressure sensors Turck's PT1000/2000 series pressure sensors are now available with an IO-Link interface and two programmable switching outputs. In addition to the series' ability to withstand shocks, pressures, and temperature changes, the new products also offer all the advantages of digital communication, including enhanced ...
	Turck proximity switch category The most common models of TURCK proximity sensors are recommended Proximity switch NI5-P12SK-YIX Proximity switch BI3U-P12SK-AMN6K Proximity switch BI5-P18SK-AP6X Proximity switch NI10-K20SK-...
	Introduction to laser displacement sensors – Turck 1. What is a laser displacement sensor? Laser displacement sensors are sensors that use laser skills to measure. It consists of a laser, a laser detector, and a measurement circuit. Laser sensors are the new type of measurement. Able to accurately measure the orientation and displacement of the measured object without touch...
	Application Notes for Infrared Sensors – Turck The infrared sensor is a very important part of the infrared detection system, but it is very delicate, and if you are not careful in use, it may cause damage to the infrared sensor. Therefore, the following points should be paid attention to in the application of infrared sensors: 1. Must ...
	Considerations for the selection of inductive sensors 1. Program selection Before selecting a plan, the given technical indicators should be clarified, such as the scale of the value, the error of the value, the resolution, the repeatability error, the time drift, the temperature drift, the application environment, etc. 2. The selection of core data ...
	Turck sensor classification Sensors refer to equipment or devices that can sense the prescribed physical quantities and convert useful signals that can be used by the Great Wall according to certain laws. It generally consists of a sensitive element and a conversion element. There are many ways to classify sensors, ...
	Turck's proximity switch fault phenomenon 1. The proximity sensor cannot confirm how far the distance between the detected objects is. 2. The switch is installed within the detection interval range, and the signal is sometimes absent (sometimes detectable, sometimes undetectable) in practice. 3. Practice the detection interval and the ...
	Precautions for the use of linear position sensors – Turck Whether it is a linear displacement sensor or a rope displacement sensor, it often encounters a variety of problems when it is used, including quality problems, application problems, environmental problems, etc., but the use of problems is common, and improper use is easy to damage the sensor. So what we're using ...
	Application area for flow sensors – Turck Direction and fluid velocity sensors are critical for different industrial, medical, and environmental applications. Flow sensors quantify the direction and rate of gas and liquid activity in applications such as density measurement, viscosity measurement, flow pattern confirmation and wall shear stress measurement. In addition to the flow parameters to the direction, ...
	Sensitivity analysis of pressure sensors – Turck 1. Confirm the type of pressure sensor according to the measurement object and measurement environment In order to carry out a detailed measurement operation, it is necessary to consider the principle of the sensor to be used, which requires the analysis of many elements before it can be confirmed. Because, even if the same physical quantity is measured, there are many kinds of ...