Honeywell Sensors JM1202ED1C2

Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize on-board application-specific integrated circuits (ASICs) to provide significant impact on sensor bias, sensitivity, temperature effects, and ...

Compensatory. Calibrated zero sum and span. mV output. Low noise. Small form factor and high impedance. Very low pressure resolution Pressure range ±4 inH20 to ±10 inH20 The SCXL series of sensors offers ...

Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...

Introduction: Honeywell HumidIcon Digital Humidity/Temperature™ Sensor, HIH6100 Series, Digital Output Type Relative Humidity (RH) and Temperature Sensor in one package. The sensor provides an accurate ±4.0 %RH level, as well as a temperature level of ±0.5 °C. ...

Suitable for the most demanding applications. Our heavy-duty pressure products are recognized by the industry for higher quality, more reliable and better service. Honeywell brings you reliability. Heavy-duty pressure sensors are used in applications where they cannot be easily replaced, with maximum durability as a preferred element. Thus Huo ...

Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...

The MG series magnets can be used as actuators for Hall-effect and magnetoresistive sensor integrated circuits with unipolar or omnipolar magnetic characteristics. Available in a wide range of compact configurations, strengths, and magnetic materials, the MG Series magnets can be used as actuators for unipolar or omnipolar magnetic applications.

Description: The RSC series is a piezoresistive silicon pressure sensor capable of taking pressure readings from either a digital output or an analog output within a specified full-scale pressure span and temperature range. Through a 24-bit analog-to-digital converter equipped with integrated EEPROM, it is possible to control sensor offset, sensitivity, temperature, etc.

Two-wire. Gauge/absolute pressure transmitter, psig/a to 10,000 psig/a, 4 mA to 20 mA output, 0.25% accuracy. True gauge pressure device with airtight design The Model 811FM is a two-wire transmitter with a weldable stainless steel diaphragm for liquid, gas, ...

Amplified/non-amplified. Absolute, gage, seal, vacuum. 316L SS wetted parts, 0 psi to 3 psi to 0 psi to 5000 psi Honeywell's SPT Series stainless steel pressure sensors are designed for use in harsh environments where hazardous media are ...

Introduction: The AWM700 series microbridge mass flow sensors enable coaxial flow measurement with a specially designed bypass flow housing. The sensor can measure flow rates up to 200 standard liters per minute (SLPM) while typically generating a pressure drop of 1 in H2O. The AWM700 features ...

Summary: The NBP series is ideal for users who want to self-compensate, calibrate, and amplify themselves so that they can utilize a bare sensor for maximum resolution output and tailor the algorithm to the requirements of the specific application. In addition, the NBP series is available in a variety of package forms and mounting options ...

Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize on-board application-specific integrated circuits (ASICs) to provide significant impact on sensor bias, sensitivity, temperature effects, and ...

HONYWELL DPT0010T1-A Sensors DPT Series Air Differential Pressure Sensors Measuring range: 0 - 10000 Output signal: 4-20mA All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover

honeywell Honeywell Sensors JM1210UD4C2 Cylindrical Sensors JSM8 Series Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...

HONYWELL DPT2500U1-B Sensors DPT Series Air Differential Pressure Sensors Honeywell's DT series of micro differential pressure transmitters are designed to measure differential or gauge pressure, and are available in a wide range of ranges as low as +/-50Pa and as high as 0-l0kPa, suitable for: VAC HVAC, Smart Building Energy...

City Technology's Series 7 sensors are suitable for gas detection, including oxygen and toxic gases. The sensors are suitable for portable detectors, fixed detectors, and some medical gas detection. City Tech's Series 7 is suitable for including oxygen and ...

HONYWELL DPT0500U2-A Sensors DPT Series Air Differential Pressure Sensors All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance Characteristics and specifications: power supply voltage (voltage ...

Uni-Curve resistors with insulated conductors and epoxy coating. -60°C to 150°C [-76°F to 302°F] The 194 Series thermistors are high-quality, cost-effective, resistor- and temperature-matched, interchangeable devices. The product does not need to calibrate the resistance temperature of the circuit components one by one.

Introduction: The 21FW Series Single-Channel Sensor, the 23FW Series Three-Channel Sensor, and the 5FW Series Magnetic Targets were originally designed and built for the Lockheed Martin Joint Strike Fighter. Hall-effect sensors and magnetic targets are highly reliable, slim, and more resistant to electromagnetic ...