Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize an on-board application-specific integrated circuit (ASIC) to calibrate and temperature compensate for sensor bias, sensitivity, temperature effects, and accuracy errors, including nonlinearity, repeatability, and hysteresis. The calibrated analog and digital output values are updated at a rate of approximately 1 kHz and 2 kHz, respectively. All products are designed and manufactured in accordance with ISO 9001 standards.
Features:
Measure gauge pressure and differential pressure
Total error zone: ±1.5 %FSS
Liquid Media Option: Allows wet/wet operation on dual-port devices
Industry-leading long-term stability: ±0.25 %FSS
Industry-leading accuracy: ± 0.25% FSS BFSL
Wide pressure range: 60 mbar to 10 bar| 6 kPa to 1 MPa | 1 psi to 150 psi
Extremely small at 8 mm x 7 mm
High blast pressure
Calibrated over a temperature range of 0°C to 50°C [32°F to 122°F].
Operates from a single supply of 3.3 Vdc or 5.0 Vdc
Output: Proportional analog output, or 12-bit digital output compatible with I2C or SPI
Power consumption: 2 uA typical when using the sleep mode option
Meets IPC/JEDEC J-STD-020D.1 humidity sensitivity level 1 requirements
RoHS and REACH compliant
Options: Internal diagnostics, liquid media, sleep mode, temperature output
Product parameters
Series Name: ABP Basic
Signal Conditioning: Amplification
Pressure range: 0 psi to 5 psi
Supply current: 5.0 mA typical
Output: Analog
Interface Type :AN: Uniaxial spiked interface
Total Error Band: ±1.5 %FSS
Shock : 100 g with a duration of 6 ms
Operating Temperature: -40°C to 85°C [-40°F to 185°F]
Storage temperature: -40°C to 85°C [-40°F to 185°F]
Measurement Type: Gauge pressure
Temperature Compensation: Yes
Supply voltage: 5 Vdc typical
Transmission function: 10% to 90% supply voltage, no temperature output, no sleep mode
Response time: 1 ms
Package Type :D IP
Accuracy (Best Fit Line): ±0.25 %FSS
Vibration: 15 g, 10 Hz to 2 kHz
Compensated temperature range: 0°C to 50°C [32°F to 122°F]
Lifespan: At least 1 million pressure cycles
This article introduces Honeywell/Honeywell pressure sensors ABPDANT005PGAA5 analog products, if you are interested in Honeywell/Honeywell sensors, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Honeywell Sensors JM1202ED1C2
honeywell Honeywell Sensors JM1202ED1C2 Cylindrical Sensors JSM8 Series
Rated: 12VDC-24VDC
Load current: ≤100mA
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: ...
|
|
Honeywell Board Mount Pressure Sensors ABP2 Basic Series
High accuracy, compensated/amplified, ±6 mbar to ±12 bar. ± 600 Pa to ±1.2 Mpa and ±2 inH2O to ±175 psi. Digital output, compatible with liquid media
The BP2 series is a piezoresistive silicon pressure sensor that can be used in a specified full-scale pressure range and temperature range.
|
|
Honeywell/Honeywell pressure sensor HSCDAND001BASA3
Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...
|
|
Honeywell's value-added packaged sensor 103SR series
Hall-effect digital (unipolar or latched) or linear sensors. Aluminum or stainless steel threaded package
The 103SR Series Hall-Effect Position Sensor Assembly is sealed in an aluminum or stainless steel threaded housing and meets the requirements of NEMA 3, 3R, 3S, 4, 4X (stainless steel housing), 12, and 13 ...
|
|
Honeywell Industrial Gas Sensor Series 1
The 1 Series analog gas sensor is a compact and slim sensor with proven City Technology. The service life of these sensors has been extended by five years, and the operating temperature and humidity range has been significantly expanded.
Can be used for a wider range of environmental conditions changed to "can be used for more ...
|
|
Honeywell Sensors JM1204ED2Y
honeywell sensors JM1204ED2Y cylindrical sensors JSM8 series
Rated: 12VDC-24VDC
Load current: ≤100mA
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: J ...
|
|
Honeywell Board Mount Pressure Sensors 24PC Flow-Through Series
Non-compensated. Low voltage. mV output. Flowmeter. SIP。 Linearity and hysteresis: 0.75 % typ.
Pressure range: 1 psi to 100 psi
The 24PC series of miniature sensors provide reliable gauge pressure sensing performance in a compact package. The sensor has proven sensing ...
|
|
Honeywell's value-added packaged sensors SR16/SR17 series
Low-cost Hall-effect vane sensors. Plastic twin towers, plastic side-mounted outlet packaging. Digital current sink output
The SR16 series Hall-effect vane sensors are designed for position and velocity sensing and are available in three termination options. The cost-effective SR16 series sensors are designed for information technology ...
|
|
Honeywell/Honeywell flow sensor AWM2150V 0.6 mA
Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...
|
|
Honeywell magnetic sensor magnets
The MG series magnets can be used as actuators for Hall-effect and magnetoresistive sensor integrated circuits with unipolar or omnipolar magnetic characteristics.
Available in a wide range of compact configurations, strengths, and magnetic materials, the MG Series magnets can be used as actuators for unipolar or omnipolar magnetic applications.
|
|
Honeywell Industrial Pressure Sensor SPT Series
Amplified/non-amplified. Absolute, gage, seal, vacuum. 316L SS wetted parts, 0 psi to 3 psi to 0 psi to 5000 psi
Honeywell's SPT Series stainless steel pressure sensors are designed for use in harsh environments where hazardous media are ...
|
|
Honeywell Stamp Pressure Sensor A-105
Flush membrane pressure transducer ranging from 100 psi to 15,000 psi with 0.50% full-scale accuracy
The Model A-105 gauge pressure sensor is manufactured using a synthetic 17-4 PH stainless steel wetted diaphragm. The advantage of this type of design is that the thin diaphragm and the heavy side walls are made up of the same piece of non-...
|
|
Honeywell/Honeywell sensors TBPDANS001PGUCV non-amplified
Introduction: Honeywell's TBP series of compensated and non-amplified basic board-mount pressure sensors are specifically designed piezoresistive silicon pressure sensors. This series of sensors is simple and easy to operate, excellent quality, cost-effective, mV output, non-amplification and temperature compensation.
|
|
Honeywell Board Mount Pressure Sensors TruStability™ SSC Series
Compensatory. ±2% FSS to ±4% FSS TEB. Ultra-low (differential, gauge), low (absolute, differential, gauge). Digital or analog output. DIP、SIP、SMT
Pressure range
± 1.6 mbar to ±10 bar, ± 160 Pa to ±1 MPa, ± 0.5 inH20 to ± ...
|
|
Honeywell Industrial Pressure Sensors 19 mm Series
Non-amplified. Absolute, gauge, vacuum gauge. Wetted parts: 316L SS; Pressure range: 0 psi to 3 psi to 0 psi to 500 psi. Ribbon cable terminals
Honeywell's stainless steel 19C, 19U and 19 gauge series sensors are designed for applications that require ...
|
|
Honeywell sensor JM1208UD4C2
Honeywell Sensors JM1208UD4C2 Cylindrical Sensors JSM8 Series
Inductive Proximity Sensors:
Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series
Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...
|
|
Honeywell Common Process Pressure Sensor FP5000
Configurable manometer/absolute pressure sensor ranging from 0.36 psig to 5,000 psig (absolute) with full-scale accuracy of ±0.1% and multiple output types
The Honeywell FP5000 series is a media-isolated, piezoresistive silicon pressure sensor that offers a variety of output options (0 V to 5 ...
|
|
Honeywell Sensor DPT0100U1-A
Honeywell Sensors DPT0100U1-A DPT Series Air Differential Pressure Sensors
Measuring range: 0 - 100
Output signal: 4-20mA
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy use
|
|
Honeywell/Honeywell flow sensor HAFUHT0015L4AXT
Introduction: The HAF series compensates for a temperature range of 0 °C to 50 °C [32 °F to 122 °F] and can operate in a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. Advanced ASIC-based compensation enables digital (I...
|
|
Honeywell/Honeywell Humidity Sensor HIH-5030-001 3.3Vdc
Description: The HIH-5030/5031 series of low-voltage humidity sensors can operate in low-voltage environments as low as 2.7 V DC and are ideal for battery-powered systems with a typical voltage of 3 V DC. The 5030/5031 complements our existing 5 V DC SMD (Surface Mount ...
|
|
Contact
working hours
