Introduction: The ABP series is a piezoresistive silicon pressure sensor capable of taking proportional analog or digital output pressure readings over a specified full-scale pressure span and temperature range. They utilize an on-board application-specific integrated circuit (ASIC) to calibrate and temperature compensate for sensor bias, sensitivity, temperature effects, and accuracy errors, including nonlinearity, repeatability, and hysteresis. The calibrated analog and digital output values are updated at a rate of approximately 1 kHz and 2 kHz, respectively. All products are designed and manufactured in accordance with ISO 9001 standards.
Features:
Measure gauge pressure and differential pressure
Total error zone: ±1.5 %FSS
Liquid Media Option: Allows wet/wet operation on dual-port devices
Industry-leading long-term stability: ±0.25 %FSS
Industry-leading accuracy: ± 0.25% FSS BFSL
Wide pressure range: 60 mbar to 10 bar| 6 kPa to 1 MPa | 1 psi to 150 psi
Extremely small at 8 mm x 7 mm
High blast pressure
Calibrated over a temperature range of 0°C to 50°C [32°F to 122°F].
Operates from a single supply of 3.3 Vdc or 5.0 Vdc
Output: Proportional analog output, or 12-bit digital output compatible with I2C or SPI
Power consumption: 2 uA typical when using the sleep mode option
Meets IPC/JEDEC J-STD-020D.1 humidity sensitivity level 1 requirements
RoHS and REACH compliant
Options: Internal diagnostics, liquid media, sleep mode, temperature output
Product parameters
Series Name: ABP Basic
Signal Conditioning: Amplification
Pressure range: 0 psi to 1 psi
Supply current: 5.0 mA typical
Output: Analog
Interface Type :JJ: Dual radial spikeless port, ipsilateral
Total Error Band: ±1.5 %FSS
Shock : 100 g with a duration of 6 ms
Operating Temperature: -40°C to 85°C [-40°F to 185°F]
Storage temperature: -40°C to 85°C [-40°F to 185°F]
Measurement Type: Gauge pressure
Temperature Compensation: Yes
Supply voltage: 5 Vdc typical
Transmission function: 10% to 90% supply voltage, no temperature output, no sleep mode
Response time: 1 ms
Package Type :D IP
Accuracy (Best Fit Line): ±0.25 %FSS
Vibration: 15 g, 10 Hz to 2 kHz
Compensated temperature range: 0°C to 50°C [32°F to 122°F]
Lifespan: At least 1 million pressure cycles
This article introduces the amplification products ABPDJJT001PGAA5 Honeywell pressure sensors, if you are interested in Honeywell sensors, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
The company respects the enterprise spirit of "practicality, hard work and responsibility", and creates a good corporate environment with integrity, win-win, and business philosophy, and takes a new management model, perfect technology, thoughtful service, and excellent quality as the foundation for survival. We always adhere to: customer first, serve customers attentively, and insist on impressing customers with their own services. Always adhering to the business philosophy of "integrity, win-win", relying on excellent prices, excellent quality, fast delivery and pre-sales consultation and after-sales service to win the trust of our customers.
|
More on that
|
Honeywell Temperature Sensor Thermistor 143 Series
5,08 mm [0.2 in] diameter disc, adjacent leads, uncoated. -60°C to 150°C [-76°F to 302°F]
The 143 series thermistors are available in a wide range of custom resistance values. The pins are not insulated. Tape and reel packaging are also available.
Dissipation constant in still air: 4.0 ...
|
|
Honeywell Temperature Sensor Thermistor 197 Series
Chips, bare wires, epoxy coating. -60°C to 125°C [-76°F to 257°F]
The 197 series thermistors are available in a wide range of custom resistance values. Fast response time.
Dissipation constant in still air: 0.75 mW/°C
Time constant in air: 15.0 s
Nominal...
|
|
Honeywell's value-added packaged sensors SR16/SR17 series
Low-cost Hall-effect vane sensors. Plastic twin towers, plastic side-mounted outlet packaging. Digital current sink output
The SR16 series Hall-effect vane sensors are designed for position and velocity sensing and are available in three termination options. The cost-effective SR16 series sensors are designed for information technology ...
|
|
Honeywell/Honeywell pressure sensor HSCDAND015PG2A3
Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...
|
|
Honeywell/Honeywell RTD Sensor HEL-777/776 Series
100 Ω or 1000 Ω platinum resistance temperature sensor (RTD). -55°C to 150°C. Plastic housing SIP
The HEL-776/HEL-777 series platinum RTDs are designed to measure temperature in printed circuit boards, temperature probes, or other cryogenic applications with a measurement range of -55 °C to 15 ...
|
|
Honeywell Industrial Pressure Sensors BPS Series
By detecting the pressure change in the battery pack, it can determine whether the battery pack has thermal runaway and output an early warning signal.
Honeywell's battery safety early warning sensor developed by unique technology can monitor the abnormal state of the battery in the system at the first time, effectively improve the safety of the whole vehicle, and maximize the safety of the whole vehicle.
|
|
Honeywell Temperature Sensor Thermistor 126 Series
Paired large glass balls. -60°C to 300°C [-76°F to 572°F]
The 126 series thermistors are designed with precision sensing elements that require interchangeability for curve fitting for precision temperature control and precision temperature indication. These products are highly reliable and consist of a pair ...
|
|
Honeywell/Honeywell pressure sensor PX3AF1BH010BSAAX
Introduction: Honeywell's PX3 series heavy-duty pressure sensors feature piezoresistive sensing technology based on ASIC (application-specific integrated circuit) signal conditioning and are equipped with a brass housing and Metri-Pack 150 or wiring harness electrical connection. The PX3 series is fully calibrated and operates at -40°C to 125° ...
|
|
Honeywell/Honeywell pressure sensor TSCDJJN001PDUCV
Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...
|
|
Honeywell Temperature Sensor Thermistor 120 Series
Miniature glass probe. -60°C to 300°C [-76°F to 572°F]
The 120 Series and Thermistors are shock-resistant, rugged, glass-sealed devices that are typically suitable for immersion in liquids and can be easily installed in air sensor assemblies. Also included is a standard glass probe configuration (12 ...
|
|
Honeywell Stamp Pressure Sensor A-105
Flush membrane pressure transducer ranging from 100 psi to 15,000 psi with 0.50% full-scale accuracy
The Model A-105 gauge pressure sensor is manufactured using a synthetic 17-4 PH stainless steel wetted diaphragm. The advantage of this type of design is that the thin diaphragm and the heavy side walls are made up of the same piece of non-...
|
|
Honeywell Sensor DPT0500U2-A
HONYWELL DPT0500U2-A Sensors DPT Series Air Differential Pressure Sensors
All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance
Characteristics and specifications: power supply voltage (voltage ...
|
|
Honeywell Common Process Pressure Transducers Model TJE
General Purpose Gauge/Absolute-Pressure Transducer with a pressure range of 0.5 psig to 60,000 psig (absolute) and ±0.10% full-scale accuracy
The model TJE pressure sensor is an all-welded stainless steel sensor designed for harsh industrial applications where accuracy and measurement stability are critical.
|
|
Honeywell/Honeywell flow sensors AWM92100V non-amplified
Introduction: The AWM90000 series of mass flow sensors feature time-proven thermal bridge technology. The AWM90000 Series offers many of the benefits of the AWM1000 Series in a more cost-effective platform. Available in both mass flow and differential pressure versions.
|
|
Honeywell/Honeywell flow sensors AWM92200V parallel interfaces
Introduction: The AWM90000 series of mass flow sensors feature time-proven thermal bridge technology. The AWM90000 Series offers many of the benefits of the AWM1000 Series in a more cost-effective platform. Available in both mass flow and differential pressure versions.
|
|
Honeywell/Honeywell Combined Temperature Sensing HIH6130-000-001
Description: Honeywell HumidIcon Digital Humidity/Temperature Sensor, HIH6100 Series, Digital Output Type Relative Humidity (RH) and Temperature Sensor combined in one package. The sensor provides an accurate ±4.0 %RH level, as well as a temperature level of ±0.5 °C.
...
|
|
Honeywell Industrial Gas Sensors AQ3 Series
High resolution, low lower detection limit. Customized low-noise circuit boards achieve high accuracy in ppb levels.
Reliable gas sensor to detect a wide range of gases: carbon monoxide (CO), nitrogen dioxide (NO2), ozone (O3), sulfur dioxide (SO2) are mainly used for environmental monitoring, ...
|
|
Honeywell Industrial Pressure Sensors 19 mm Series
Non-amplified. Absolute, gauge, vacuum gauge. Wetted parts: 316L SS; Pressure range: 0 psi to 3 psi to 0 psi to 500 psi. Ribbon cable terminals
Honeywell's stainless steel 19C, 19U and 19 gauge series sensors are designed for applications that require ...
|
|
Honeywell Industrial Gas Sensor Series 1
The 1 Series analog gas sensor is a compact and slim sensor with proven City Technology. The service life of these sensors has been extended by five years, and the operating temperature and humidity range has been significantly expanded.
Can be used for a wider range of environmental conditions changed to "can be used for more ...
|
|
Honeywell/Honeywell flow sensor AWM2150V 0.6 mA
Introduction: The AWM2000 Series Microbridge Air Mass Flow Sensor is a passive unit consisting of two Wheatstone bridges. According to the operating specifications, a heater control circuit is also required. According to the operating specifications, a power supply circuit for the sensor bridge is also required. These two circuits are not on the package board, so ...
|
|
Contact
working hours
