Honeywell Sensor DPT2500U1-B

Introduction: The AWM700 series microbridge mass flow sensors enable coaxial flow measurement with a specially designed bypass flow housing. The sensor can measure flow rates up to 200 standard liters per minute (SLPM) while typically generating a pressure drop of 1 in H2O. The AWM700 features ...

Introduction: The AWM5000 Series Microbridge Mass Flow Sensors feature a venturi flow housing. This series measures airflow of up to 20 standard liters per minute (SLPM) while generating a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the airflow, which greatly ...

Sensor: DPT series air pressure differential sensor All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance FeaturesSpecificationsSupply Voltage (Voltage Type)12 30 Vac/Vdc Supply Voltage( ...

HONYWELL DPT0100U2-B Sensor DPT Series Air Differential Pressure Sensor All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance Characteristics and specifications: power supply voltage (voltage ...

High resolution, low lower detection limit. Customized low-noise circuit boards achieve high accuracy in ppb levels. Reliable gas sensor to detect a wide range of gases: carbon monoxide (CO), nitrogen dioxide (NO2), ozone (O3), sulfur dioxide (SO2) are mainly used for environmental monitoring, ...

Amplified. As low as ±2 %FSS TEB. Gauge pressure and seal gauge pressure. 304L SS port, Haynes 214 alloy diaphragm, plastic body. 6 bar to 550 bar, 0 psi to 8000 psi The MLH series of heavy-duty pressure sensors combines application-specific integrated circuit (ASIC) technology with ...

Suitable for the most demanding applications. Our heavy-duty pressure products are recognized by the industry for higher quality, more reliable and better service. Honeywell brings you reliability. Heavy-duty pressure sensors are used in applications where they cannot be easily replaced, with maximum durability as a preferred element. Thus Huo ...

differential pressure (wet/wet, wet/dry); mV/V, 4 mA to 20 mA; ±5 Vdc，±10 Vdc； Multiple connectors and pressure ports are available; Intrinsically safe options The FP2000 series is a configurable differential pressure sensor that allows customers to choose the configuration that best meets their application needs. From...

Summary: The SSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the circuit board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Summary: The HSC series is capable of performing comprehensive calibration and temperature compensation for sensor zero, sensitivity, temperature coefficient, and nonlinearity using an application-specific integrated circuit (ASIC) on the board. Calibrated analog output values and digital outputs are updated at a rate of approx. 1 kHz and 2 kHz, respectively ...

Honeywell Sensors DPT0250U1-B DPT Series Air Differential Pressure Sensors Measuring range: 0-250 Output signal: 0-10V All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip cover design for easy use

General Purpose Gauge/Absolute-Pressure Transducer with a pressure range of 0.5 psig to 60,000 psig (absolute) and ±0.10% full-scale accuracy The model TJE pressure sensor is an all-welded stainless steel sensor designed for harsh industrial applications where accuracy and measurement stability are critical.

Hi-speed USB 2.0 interface. Small footprint. Fast microprocessor. Compatible with Honeywell EAXX 2D scan engines. Low power consumption Scan-intensive applications need to be faster. Deploying the Honeywell ED40 high-performance 2D decoder board in an OEM solution is like "stepping on the gas", ...

Introduction: Honeywell's TBP series of compensated and non-amplified basic board-mount pressure sensors are specifically designed piezoresistive silicon pressure sensors. This series of sensors is simple and easy to operate, excellent quality, cost-effective, mV output, non-amplification and temperature compensation.

Digital Hall-effect position sensor. Plastic threaded sleeve encapsulation. Current sink output The SR3 series of digital Hall-effect position sensors are housed in a 14 mm cylindrical plastic housing and support both current sink output and DC power supply This article introduces Honeywell's value-added packaging ...

HONYWELL DPT0100U2-A Sensor: DPT Series Air Differential Pressure Sensor All-stainless steel capacitive sensitive components • Good temperature stability and long-term stability • Power miswiring protection • Flip-top design for easy field wiring and maintenance Characteristics and specifications: power supply voltage (voltage ...

Introduction: The AWM5000 Series Microbridge Mass Flow Sensors feature a venturi flow housing. This series measures airflow of up to 20 standard liters per minute (SLPM) while generating a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the airflow, which greatly ...

honeywell Honeywell Sensors JM1210UD4C2 Cylindrical Sensors JSM8 Series Inductive Proximity Sensors: Rectangles: JPA17 series, JPA25 series, JPA30 series, JPA40 series Cylindrical: JSM8 series, JM12 series, JM18 series, JM30 series ...

Description: The Honeywell TruStability TSC Series is a piezoresistive silicon pressure sensor that provides a proportional analog output for providing pressure readings over a specified full-scale pressure span and temperature range. The TSC series sensors are intended for use in non-corrosive and non-corrosive applications such as air...

Introduction: The 21FW Series Single-Channel Sensor, the 23FW Series Three-Channel Sensor, and the 5FW Series Magnetic Targets were originally designed and built for the Lockheed Martin Joint Strike Fighter. Hall-effect sensors and magnetic targets are highly reliable, slim, and more resistant to electromagnetic ...