Omron 2D CMOS laser sensor ZS-HL IP20

Product Advantages:

High-performance sensors support core quality for accurate measurements over a wide range

Ultra-stable

　　Product Introduction

project		Model	ZS-HLDC11	ZS-HLDC41
Average number of samples			1/2/4/8/16/32/64/256/512/1，024/2，048、4，096
Install the sensor			1 per sensor controller
External interfaces	Linking method		Serial I/O: Linker, Others: Pre-wired (standard cable length: 2m)
	Serial I/O	USB2.0	1 port, full speed (below 12Mbps), MINI-B
		RS-232C	1 port, less than 115,200bps
	output	Judge the output	3 outputs: HIGH/PASS/LOW NPN open collector, DC30V, 50mA max., residual voltage: 1.2V max	3 outputs: HIGH/PASS/LOW PNP open collector, max. 50mA, residual voltage: max. 1.2V
		Linear output	You can choose from 2 outputs, voltage or current (selectable via the toggle switch on the base). · Voltage output: -10~10V, output impedance 40Ω · Current output: 4~20mA, maximum load resistance: 300Ω
	input	Laser OFF, zero timing, reset	ON: Short circuit, terminal voltage 0V or 1,5V or less OFF: Open circuit (leakage current: 0.1mA max.)	ON: The power supply voltage is short-circuited or the power supply voltage difference is within 1.5V OFF: Open circuit (leakage current: 0.1mA max.)
function			Display: Measured value, threshold value, voltage/current, amount of received light, and resolution/terminal block output2 Sensing: Mode, Gain, Measurement Object, Head Mount Measurement points1: Average, peak, valley, thickness, discontinuity, and calculation Filtering: Smooth, Average, and Differential Outputs: Proportional (Focus/Correct), Judgment (Hysteresis and Timer), Non-Measurable, and Group (Toggle & Clear)* System saving, initialization, measurement information display, communication settings, key locking, language and data loading Task: ZS-HLDC□1: Single or multi-task (up to 4 items) ZS-LDC□1: single-task
Status indicator			HIGH (orange), PASS (green), LOW (orange), LDON (green), ZERO (orange), ENABLE (green)
Segmented display		Main display	8-segment red LED, 6-digit
		Sub-display	8-segment green LED, 6-digit
LCD			16 digits× 2 lines, character color: green, resolution per character: 5×8 pixel matrix
Set the input		Set key	Arrow keys (up, down, left, right), set key, exit key, menu key and function key (1~4)
		Toggle switch	Threshold switch (2 states: high/low), mode switch (3 states: function, teach-in, and operation)
Supply voltage			DC21.6V~26.4V (including ripple)
Current consumption			Up to 0.5A (when the sensor head is connected)
Ambient temperature			Operation: 0~50°C, Storage: -15~+60°C (no freezing, no condensation)
Ambient humidity			Running and storage: 35%~85% (no condensation)
Ingress protection			IP20 (IEC60529)
Material			Housing: Polycarbonate (PC)
Cable length			2m
quality			Approx. 280g (excluding packaging materials and accessories)
annex			Ferrite core(1), instruction manual

Omron 2D CMOS laser sensor ZS-HL IP20

Sections viewed

Contact

working hours