The difference between industrial computer hard disk - EVOC

During the use of the industrial computer, the user mistakenly deleted the system file, resulting in an abnormal function of the industrial computer; The industrial computer was invaded by a virus Trojan horse, which led to problems in the system; Some fault prompts frequently pop up on the desktop, and the industrial computer needs to be reinstalled in the system. Strictly speaking, the industrial computer ...

1. Production process When purchasing an industrial motherboard, you should first observe the manufacturing process of the industrial motherboard. Detect the manufacturing process of the industrial motherboard to see whether the workmanship of the motherboard is precise, such as whether the number of layers of the circuit board is a multi-layer board (preferably more than 6 layers), whether the joints of each solder joint and wave solder joint are working.

Industrial computers are mainly used in various industrial sites related to production such as continuous production, intermittent production and batch processing, and are characterized by reliability and stability, and the probability of product problems is low. In the face of different industrial sites, industrial computers may be in a very complex environment, such as dust ...

1. First of all, prepare things: there are more things to prepare, such as detergent (bring your own sponge block), ear wash balls, hair dryers, oil brushes, soft rags, erasers, alcohol, cotton balls, etc., as well as Phillips screwdrivers and anti-static wrist straps. ...

1. After the IPC is turned on, the motherboard self-test is successful, but the system cannot be booted from the hard disk 1. Press the "Del" key to enter the CMOS hard disk parameter setting and boot order to see if the boot order is correct. 2. After booting with optical drive or floppy drive, check whether the hard disk of the industrial computer has a boot system or whether the hard disk is normal.

The industrial control motherboard is an important part of the industrial computer, which can get used to the messy environment and long-term high-load work on the industrial site. The differences from commercial motherboards are: First, the materials and planning of components Commercial motherboards ...

When selecting industrial computers, we often encounter PCI and PCI-e expansion slots, what are the differences between the two? 1. The color is different. In IPC motherboards, the PCI slot is milky white, while the PCI-e slot is black. 2. The transmission rate is different. PCI slot max data ...

Parallel interface, referred to as parallel port. The parallel port of the industrial computer uses a 25-pin D-connector. The so-called "parallel" means that 8-bit data is transmitted together through parallel lines, so that the data transmission speed is greatly improved, but the length of the parallel transmission line is limited, and due to the increase in length, the disturbance will increase.

Downtime is a common problem of industrial computers, and solving downtime can ensure the high reliability and real-time performance of industrial computers. The following is an analysis of the common causes and solutions of industrial computer downtime. 1. Too much dust causes downtime ...

There are too many automatic launch projects in the IPC system launch file; The disk may have bad tracks; The disk is fragmented; Too many junk files; The NIC is set incorrectly; Poisoning of industrial control all-in-one machines. In general, industrial computers ...

In order to satisfy the continuous development of passenger information system (PIS) in railways and subways, EVOC has launched a new generation of PIS host - TRW-8371P, which fully satisfies the EN50155 specifications and has the following outstanding features: 1. ...

Advantech's industrial control equipment is used and maintained. 　　Error handling is first-come, first-served. First of all, we must understand and then familiarize ourselves: first analyze and consider the possible problems according to the on-site situation, and then we can do it; First cleaning, then repairing: practice has shown that very ...

There are 5 categories of common causes of industrial computer problems, which may be caused by processors, power supplies, motherboards, heat dissipation, graphics cards, etc., many of which can be dealt with by self-inspection and repair.

1. The industrial computer chassis is made of aluminum alloy structure, which has the characteristics of efficient dustproof, anti-magnetic and shock-proof compared to general computers; 2. The chassis is equipped with PCI and ISA slots. 3. Set up a targeted independent power supply in the chassis, ...

1. The whole machine system is selected for EVOC EPE bus planning, and the CPCI pinhole connector is used for connection between the CPU board and the bottom plate, which is 360 degrees fully surrounded by touch, with high air tightness, anti-corrosion and anti-oxidation, dust-proof, etc., and handles the work in various industrial harsh environments such as dusty, wet, high/low temperature, corrosion, etc.

One. Buy a little common sense 1. The current is very small In fact, many users will ignore the size of the current when buying the power supply of the industrial computer, and then the tragedy of the operation will occur, so we are reminded to pay attention to the size of the current when buying the power supply of the industrial computer. 2. Accepted voltage ...

As a special computer equipment in the marginal field, industrial computer has been more and more widely used in various occupations in recent years, but many professional bosses or users still have a relatively one-sided understanding of industrial computers, and it is easy to fall into the misunderstanding of selecting equipment when buying industrial computers. How does equipment affect industrial control ...

1. First put the body of the embedded industrial control all-in-one machine in a stable place, and accurately embed the base into the body. 2. Put on the screws, screw the screws into each eyelet, and confirm whether they are tightened. 3. Before cleaning the screen of the embedded industrial control all-in-one, stop using the equipment and unplug the power plug.

First, the power supply problem Due to the unstable external power supply, the aging of the power supply line or lightning strikes, etc., the power supply is damaged or the fan stops, resulting in abnormal operation. Perhaps damage to other parts of the machine due to the power supply will cause problems in the AC machine. If the delivery ...

The LED die bonder is generally faced with a moving PCB board, and the LED wafer is sucked from the wafer tray and mounted onto the movable PCB (printed circuit board), which is particularly important for the matching and coordination of the machine, so it brings strict requirements to the action time and processing speed of each part of the system; Combine...