If you understand the scope of application of the busway, you can see that the excellent effect of the busway has the upper hand, which has a lot to do with the structural features. Therefore, if you want to have more confidence with the bus duct, you still need to understand it from the structural characteristics. At the moment of the rapid development of China's economy, the effect of bus duct is generally significant.
In the construction of large-span structure, the advantages of the bus duct are reflected heartily, the appearance of the bus duct itself is relatively small, giving this more space to the relevant machinery and equipment, and the bus duct has automatic compensation connection and single anchor bolt clamping terminal, has very good characteristics, so the application length of the bus duct in the device process is generally convenient.
The stability of the busway is also one of its key characteristics. If all the machinery and equipment cannot ensure the safety of the workers during the operation, it will cause great damage to the new project. The bus duct is made of air insulation, and the internal structure is made of high-toughness engineering plastics to improve the resistance of the bus duct to mobility. In the event of an operational error during the assembly process, the multi-layer structure at the interface can also be of great assistance.
Therefore, busway is a kind of machine equipment that can make us more labor-saving when laying and installing electrical lines, and it will be widely used by us. If you have more preferences for busway, you can grasp it on our platform at any time.
What are the basic principles for the selection of trunking parts?
The busway mall was developed relatively late in China, but it is booming. The busway and the metal duct are used together to create a control loop in the alloy groove and a new control loop to operate. However, busway is limited in multi-storey buildings.
In China, the high-quality development of bus duct parts was carried out in the 60s of the 20th century. Through decades of development trends, the application of bus duct accessories has been improved, and it has become an indispensable connection method in the new power system.
The application of bus duct parts is necessary for the insulation layer support point, and the insulation layer support point is the common component of the bus duct parts, and only a kind of machinery and equipment used to support the point bus duct parts can be. The composition of the enclosure is indispensable, as it protects the machine from external conditions and improves the maintenance of the system. Even if there is a shell, naturally its back cover is also very important, and its key effect is to plug the opening in the shell.
Due to the new power supply circuit of the busway spare part, the battery needs to be charged, so it is also part of the battery charge, and it can also include a neutral electrical conductor under normal start-up. In order to prevent safety accidents, its insulating partition is not available or missing, and the power switch of the pulse and AC contactor of the critical protection equipment.
|
More on that
|
Fast protection of medium and low voltage busbars – Wienal
1.It is necessary to install arc light maintenance
Arc maintenance in foreign countries has nearly 20 years of history, the first set of maintenance devices in 1995 has been put into operation, China's previous imported units in the introduction of foreign complete sets of arc light maintenance (such as Guohua Tianjin Panshan Power Plant), domestic units ...
|
|
Power system bus wiring method - Vernal
(1) Single busbar. Single busbar, single bus segment, single bus plus bypass, and single bus segment plus bypass.
(2) Double busbar. Double-busbar, double-busbar segmentation, dual-busbar plus bypass, and dual-busbar segmentation plus bypass.
(3)3/2 wiring ...
|
|
Difference Between Fuse and Circuit Breaker – Vernal
The principle of the fuse is to use the current to flow through the conductor to heat the conductor, and the conductor is ablated after reaching the melting point of the conductor, so the electrical appliances and circuits used for circuit maintenance are not burned out. It is an accumulation of heat, so it is also able to complete overload maintenance. Once...
|
|
What is the Wiener bus system
The Wiener bus system is a standardized system for bus spacing, which is used in low-voltage power supply and distribution switchgear, so that the bus can both conduct electricity and support electrical components. The system is divided into 40, 60, 100 and 185mm systems.
...
|
|
Wiener bearing repair technology
1. Comprehensive correction of bearings
The comprehensive correction of the bearing includes the comprehensive and strict correction process of the damaged bearing after cleaning, dismantling, inspection, roller table grinding or replacement of inner and outer rings, new rolling element manufacturing/original rolling element grinding, rolling element replacement, assembly, clearance adjustment and inspection and packaging.
|
|
The advantage of closed busbar over open busbar is Wiener
1) Closing the bus duct can reduce the grounding fault, prevent the short circuit between the phases, and fundamentally eliminate the grounding fault caused by external moisture, dust and foreign objects, and improve the continuity of generator operation.
2) Eliminate the surrounding ...
|
|
Operating regulations for the use of busbars - Wiener
1. Charging to the bus should be carried out with a switch (bus tie, bypass or line switch) with snap-action maintenance that reflects various types of faults. Before charging the bus, it should be considered whether the system may be unstable if the charging bus trips, and if necessary, the active power flow of the relevant line can be reduced. ...
|
|
Wiener bus load forecasting method
Bus load guessing is a kind of power system load guessing, and the bus system load can be defined as the sum of the terminal load of a relatively small power supply area supplied by the main transformer of the substation, which is the refinement of the system load. Bus load guessing generally only carries out short-term load guessing, and the result is ...
|
|
Wiener fixed and busbar mounting
Precautions for the device
VDE 0660 Specification Section 107 / EN 60947-3 Specification / IEC 60947-3 Specification
3 poles are broken at the same time, double breakpoints.
Operator-independent, safe opening/closing, in position ...
|
|
The importance of room power supply and busbar system – Vernal
In today's information society, the computer room is a very common equipment, so the most important thing in a computer room is the bus system, which is the center and skeleton of the power distribution of the entire computer room. Then a reasonable bus system will greatly improve the efficiency of the computer room. So how do you optimize ...
|
|
Precautions for busway installation
1. Requirements for civil engineering before installation
1. The foundation, frame, reserved holes and embedded parts meet the planning requirements of electrical equipment.
2. After the construction of the roof and floor slab, there shall be no leakage.
3. After the indoor above-ground construction is completed, mark the leveling elevation on the wall on the ground.
|
|
Introduction to busbars, busway, and busbridges - Wiener
generatrix
In the field of electricity, the busbar can also be called the busbar, busbar, etc., which mostly refers to the busbar or power supply trunk in the high and low voltage cabinet, which is used to connect multiple electrical lines. The system will install various interface cards through the bus, and transmit various data to the devices connected to the interface cards.
|
|
Bus voltage non-system equipment fault handling method - Wiener
In order to ensure the safe and economical operation of the power system and its power generation, supply and electrical equipment, power grid users require voltage separation to operate in three ways: forward voltage regulation, reverse voltage regulation and constant voltage regulation. However, in the actual operation of the power grid, due to the change of active and reactive power output, the increase or decrease of the electrical load, the system wiring party...
|
|
Dense busway with high insulation – Wienal
The dense busway is made of structure, with high mechanical strength, good sealing, fast heat generation, good shielding function and anti-chimney effect.
The conductor is constructed to overcome edge discharge and acute angle damage to the insulation.
Insulation selection extrusion ...
|
|
Difference Between Busbar and Cable – Vernal
When the busway has not been developed and introduced, the cable is still an indispensable figure in the low-voltage power distribution system, when the busway system is introduced and widely used. Whether to choose the cable or the bus duct has become a topic of endless debate.
...
|
|
Wiener is a common way to wiring busbars
Single bus wiring method: all outgoing wires are connected to the same busbar, which is also the most cost-effective and simplest wiring method
Single bus segmentation: The outgoing line is arranged in two parts on different sections of the single busbar, so that a power failure in the meantime does not affect the power supply of the other bus
...
|
|
Introduction to several power supply systems – Wienal
At present, China has five power supply systems: IT, TT, TN-c, TN-c-s and TN-S. They have their own advantages and disadvantages, and we should choose sensitively according to the actual situation in life.
Five power supply systems
1.IT power supply system
In a ...
|
|
A new product has been added to the world of CrossBoard® systems
A new addition to the world of CrossBoard® systems: the MOTUS® hybrid motor starter with IO-Link interface is a new networking feature in the MOTUS® IO-Link family that enables continuous communication between the control and device levels. Control the delivery of instructions, control the parameters ...
|
|
Features of busway power supply system - Wiener
1. Trunk power distribution system, simple wiring and reliable operation.
2. It is convenient to tap, and you can tap without cutting off the main power supply. Large power supply capacity up to 6300A current-carrying capacity.
3. High dielectric strength, strong overload, superior fire performance. Good heat dissipation performance, low impedance ...
|
|
Wiener bus differential protection switching operation
1. Whether the scale of bus differential maintenance is determined, and whether the maintenance goal is unchanged
Generally, differential maintenance includes bus differential maintenance, transformer differential maintenance, generator differential maintenance and line differential maintenance. The basic principle of achieving differential maintenance is common, i.e. on all sides or on each side...
|
|
Contact
working hours
