CHINT/CHINT CKJ5 Series Vacuum AC Contactor CKJ5-160

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.

NBH-80 miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current 80A in household and similar places of the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion, can also be used as a disconnected line for line and equipment maintenance...

The NP3 series pushbutton is suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 380V, DC working voltage up to 220V. It is suitable for remote control of equipment in the open air, rain, snow and dust, such as cranes, electric hoists and other equipment. Standard: GB/T 14048. ...

HZ12 series power cut-off switch is suitable for AC 50Hz or 60Hz, voltage to 550V circuit, as the power supply cut off and on. Comply with standards: GB/T 14048.3, IEC 60947-3. This article introduces the CHINT/CHINT HZ12 series combination switch (power cut-off switch) ...

Introduction: CHINT/CHINT AC contactor NC1-09 (Z) (hereinafter referred to as contactor), mainly used for AC 50Hz (or 60Hz), rated working voltage to 690V, in AC-3, 400 (380) V use category rated working current to 95A in the circuit, for long-distance connection and breaking circuit ...

Introduction: LW5D series universal transfer switch is mainly suitable for converting electrical control circuits (electromagnetic coils, electrical measuring instruments and servo motors, etc.) in circuits with AC 50 or 60Hz, voltage to 380V, DC voltage to 220V, and can also directly control 5.5kW three-phase cage induction motors.

Rated working voltage (Ue): AC230V 50Hz; Rated insulation voltage (Ui): 500V; Overvoltage Action Setting Value (Uo): 280 (1+5%) V; Tripper action characteristics: When the main circuit voltage is 230 (1+5%)V, the tripper should be able to keep the circuit breaker working for a long time. When the Lord ...

NDT1 series warning light, with integrated multi-layer structure, is suitable for indication, warning, fault and other indication signals in telecommunications, electrical and other lines with AC 50Hz (or 60Hz), rated working voltage of 220V and below or DC working voltage of 24V and below. Wide range of applications ...

NA1-10 million universal circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage AC400V, AC690V, rated working current to 1000A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single ...

The NF1 load switch is suitable for electrical circuits with AC 50Hz or 60Hz and voltage 690V and below. It is widely used in power distribution systems and automation systems in construction, electric power, petrochemical and other industries. It is mainly used for the main switch of machine tools, fans and pumps, and can also be used as a small-capacity motor ...

NB1LE-63□ residual current action circuit breaker is suitable for AC 50Hz, rated voltage unipolar two-wire, two-pole 230V, three-pole, three-pole four-wire, four-pole 400V, rated current up to 63A. When a person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can ...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

The NXHB-125 disconnector complies with IEC60898 and GB10963 standards. It is suitable for AC 50Hz or 60Hz, rated voltage 250V and below residential single-phase lines, to protect the overload and short circuit of electrical lines. The product has high breaking capacity, small size and a width of only 18mm. Zero, fire ...

NB8-40 miniature circuit breaker is mainly suitable for AC 50Hz, rated voltage to 240V, rated current to 40A in commercial office buildings, residential and general industrial use of terminal distribution lines, to provide overload, short circuit protection, but also under normal circumstances to the line infrequent turnover...

Introduction: GP-UPS series online uninterruptible power supply is an online UPS model with power frequency three in and three out or three in and out of line. This series of UPS adopts the high-frequency double-conversion structure of output isolation transformer and advanced all-digital control technology to achieve stable, clean and uninterruptible power supply output. At the same time ...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

HY23 series instead of HZ3 series combination switch is suitable for AC 50Hz or 60Hz, voltage 380V circuit, as a power supply introduction switch, or as a three-phase squirrel cage induction motor with a control operation frequency of no more than 300 times per hour. Rated voltage: 380 Rated current: 30 Control Electricity ...

Introduction: NVF3G-QZ series products are the company's special inverter specially designed for the application characteristics and control requirements of the lifting industry, using advanced vector control technology and torque control technology, with fast load dynamic response, large low-frequency torque, strong overload capacity and other characteristics, and integration ...