CHINT/CHINT NC1 Series AC Contactor Withstand voltage 6kv

The NXHB-125 disconnector complies with IEC60898 and GB10963 standards. It is suitable for AC 50Hz or 60Hz, rated voltage 250V and below residential single-phase lines, to protect the overload and short circuit of electrical lines. The product has high breaking capacity, small size and a width of only 18mm. Zero, fire ...

HZ12 series power cut-off switch is suitable for AC 50Hz or 60Hz, voltage to 550V circuit, as the power supply cut off and on. Comply with standards: GB/T 14048.3, IEC 60947-3. Ith A：40 Ui A：550 Ue V：380 Ie/A（AC-23A）： 40 ...

Introduction: CHINT/CHINT Miniature Circuit Breaker NXB-40 is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters Forehead...

NL1-63 residual current action circuit breaker (without overcurrent protection) is suitable for AC 50Hz, rated voltage at two poles 230V, four poles 400V, rated current to 63A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be used in a very short time ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CHINT/CHINT NXBLE-125 residual current action circuit breaker Rated current (In): 63A, 80A, 100A, 125A (1P+N, 2P); Rated Residual Operating Current (IOn) : AC type: 0.03A, 0.05A, 0.075A, 0.1A, 0.3A; Type A: 0.03A, ...

NB1G-63 miniature circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage 230V, rated current to 63A in the line, the line plays the role of overload short circuit and overvoltage protection, can also be used as the line infrequent operation conversion. Standards: GB ...

POWGRID-M intelligent AC low-voltage complete set of equipment is a new generation of low-voltage switching system designed and developed by CHINT Low-voltage Intelligent Electrical Appliance Research Institute with completely independent intellectual property rights. It integrates many advantages of similar products at home and abroad, adopts standardized and modular design, and has the ability to measure the advantages of intelligent measurement.

NKB1 series control and protection switchgear (CPS) (hereinafter referred to as "switch") is mainly used in AC 50Hz (60Hz), rated working voltage to 690V, rated working current 1A to 125A, controller setting current 0.4A to 125A, control motor power 0.12kW to 55kW ...

NA1 series universal circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated working voltage to AC690V, rated working current to 6300A and below in the distribution network, used to distribute electric energy and protect lines and power equipment from overload, undervoltage, short circuit, single-phase grounding, etc.

Introduction: NJR2-ZX series online soft starter is based on advanced dual CPU control technology as the core, controls the thyristor module, realizes the soft start and soft stop functions of the (squirrel cage) three-phase AC asynchronous motor, and has the functions of overload, input phase loss, output phase loss, load short circuit, start...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

Introduction: NJR2-D series soft starter is based on advanced dual CPU control technology as the core, controls the thyristor module, realizes the soft start and soft stop functions of the three-phase AC asynchronous motor, and has the functions of overload, input phase loss, output phase loss, load short circuit, starting current limiting timeout, overvoltage, ...

Introduction: NXZ series automatic transfer switch electrical appliances are suitable for AC 50Hz, rated voltage 400V/415V and below, rated current to 630A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another, in order to ensure the normal supply of load circuits.

Introduction: NXZB/NXZHB series automatic transfer switch electrical appliances are suitable for AC 50Hz, rated voltage 400V/415V and below, rated current to 63A three-phase four-wire dual-circuit power supply grid, automatically connect one or several load circuits from one power supply to another, in order to ensure the load circuit ...

SHT-X1H shunt trip is suitable for AC rated voltage to 400V or DC rated voltage 48V in the line, and NBH-63, NBH-40 series circuit breaker matching, when the tripper terminal is connected to the rated control voltage, the tripper action and drive the circuit breaker to automatically break, so as to achieve long-distance ...

NL1E-63 residual current action circuit breaker (without overcurrent protection) is suitable for AC 50Hz, rated voltage at two poles 230V, four poles 400V, rated current to 63A line, when the person is electrocuted or the leakage current of the grid exceeds the specified value, the residual current action circuit breaker can be used in a very short time ...

Rated current (In): 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A Rated working voltage (U): 230V-(1P, 1P+N), 400V-(2P-4P, 3P+N); Rated insulation voltage (Ui): 500V; Frequency: 50Hz Electromagnetic tripping ...

NH3-63 disconnector (hereinafter referred to as the switch) is suitable for AC 50Hz, rated voltage 230V, rated current to 63A resistance circuit, mainly for no load to turn on or off the circuit, for the line and power supply to be connected or isolated. It is especially suitable for effective isolation of power supply during line maintenance ...

HY2 series reverse switch (hereinafter referred to as switch) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 380V, rated working current to 20A motor circuit, used as a direct switch on and off a single squirrel cage induction motor, so that it rotates, reverses and stops. Compliant with standards ...