CHINT/CHINT NP3 series buttons

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

Introduction: NVF3 inverter is a high-performance vector control inverter independently developed by our company, which adopts advanced control strategy to achieve high-precision magnetic flux vector torque control, with high control accuracy, wide speed range, large starting torque, high reliability, strong overload capacity, flexible operation...

NB1-63 □ miniature circuit breaker is suitable for AC 50Hz rated voltage 230/400V, rated current to 63A in the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion, can also be used as a disconnecting switch for disconnecting the line for line and equipment maintenance...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...

NU6-III series surge protector (hereinafter referred to as surge protector) is used in AC 50Hz, rated working voltage 230V single-phase power distribution system, to meet the SPDIII. test, its open circuit voltage peak to 10kV (1.2/50μs), short circuit current to 5kA (8/20μs), suppress ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

This product is suitable for AC 50Hz, rated voltage 230V, rated current to 63A line, play overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. Conform to the standard: GB/T 16917.1 IEC 61009-1, obtained CCC certification...

NPH1 series push button is suitable for AC 50Hz or 60Hz, rated working voltage to 415V and DC rated voltage to 250V in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for light signal indication ...

OVT-X3H overvoltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-125 series circuit breaker is used together, when the voltage at the end of the tripper rises to the voltage protection range, the tripper acts and drives the circuit breaker to automatically break, so as to achieve the overvoltage protection of the line. ...

AL-X1H alarm contact is mainly used in the line with AC rated voltage to 415V or DC rated voltage to 130V, and is assembled with NBH-40 and NBH-63 series circuit breakers for signal indication of remote circuit breaker fault breaking. The alarm contact is an accessory product that is assembled on the left side of the circuit breaker for use.

CJX1-K series AC vacuum contactor (hereinafter referred to as contactor), mainly used for AC 50Hz-60Hz, rated insulation voltage of 1000V, rated working current to 820A under the AC-3 use category of rated working voltage of 380V, for long-distance connection and breaking of the circuit ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NB7 series miniature circuit breaker is suitable for overload and short circuit protection in the line of AC 50Hz, rated voltage to 400V, rated current to 63A, can be used as infrequent operation conversion of the line under normal circumstances, and can also be used as an isolation switch for disconnecting the line for line and equipment maintenance.

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

YBLX-HL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Comply with the standard ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

Scope of application: NC9 series vacuum AC contactor, hereinafter referred to as contactor, is mainly used in AC 50Hz rated working voltage to 1140V, rated working current to 1000A circuit for long-distance connection and breaking circuit and can be used with appropriate thermal overload relay or electronic protector ...

NB8-40 miniature circuit breaker is mainly suitable for AC 50Hz, rated voltage to 240V, rated current to 40A in commercial office buildings, residential and general industrial use of terminal distribution lines, to provide overload, short circuit protection, but also under normal circumstances to the line infrequent turnover...