CHINT/CHINT NBH-80 miniature circuit breaker

NBHLE-40 residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230-400V, rated current to 40A in the line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on-off under normal circumstances. The product conforms to IEC61009-1, GB/...

Introduction: PC-UPS series uninterruptible power supply is a backup UPS model specially developed for computer loads. It is mainly composed of charging module, battery pack, inverter module and conversion device and other modules, when the mains is normal, it provides a straight-through mains or tap transformer to the load and slightly stabilized the voltage.

CHINT/CHINT NXBLE-32 residual current action circuit breaker Rated current (In): 6A, 10A, 16A, 20A, 25A, 32A; Rated residual operating current (IOn): 0.01A(1P+N, 2P), 0.03A, 0.05A, 0.075A, 0.1A, 0.3A; Rated...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 6 Output Type: Relay Maximum Inductive Load: 80V...

ND9 signal light is suitable for AC 50Hz/60Hz, rated voltage up to 230V, DC voltage up to 230V circuit control system. It is used as an indication signal, preset signal, accident signal and other indication of telecommunications, electrical and other lines. Standards: GB/T 14048.5, IEC 60947-5-1 ...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

CJ20 series AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz (or 60Hz), rated working voltage to 660V, rated working current to 630A, for long-distance switching and breaking circuits, and can be combined with appropriate thermal overload relays.

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

The POWGRID-F series terminal box is suitable for circuits with AC 50Hz or 60Hz, rated voltage of 230V/400V AC, rated current/maximum continuous input current of no more than 125A, and the maximum power consumption capacity of the cabinet is 35W. It can be widely used in real estate - residential, commercial construction, hotels and public buildings. Technology...

HZ12 series power cut-off switch is suitable for AC 50Hz or 60Hz, voltage to 550V circuit, as the power supply cut off and on. Comply with standards: GB/T 14048.3, IEC 60947-3. Ith A：40 Ui A：550 Ue V：380 Ie/A（AC-23A）： 40 ...

NKB1 series control and protection switchgear (CPS) (hereinafter referred to as "switch") is mainly used in AC 50Hz (60Hz), rated working voltage to 690V, rated working current 1A to 125A, controller setting current 0.4A to 125A, control motor power 0.12kW to 55kW ...

NPM8 series push buttons are suitable for industrial control, instrumentation, and household appliances with AC 50Hz (60Hz), rated working voltage AC220V and below, or DC working voltage DC110V and below. It is used for the control of electrical circuits of contactors, relays and other signals, with an indication ...

CHINT/CHINT Terminal Appliances —NXU-III. Surge Protective Device Basic parameters and technical performance indicators (Table 1) Design types and protection mode combinations for different models of surge protective devices (see Table 2) SPECIAL FEATURES The surge protective device has a deterioration indication, as shown in sequence 3 in the figure ...

CKJ11 series AC vacuum contactor (hereinafter referred to as contactor) is mainly used in photovoltaic and wind power industries for long-distance connection and breaking circuits, and can also be used in mining, smelting, textile, construction and other places to remotely connect and break and frequently start to control AC motors. Accord with...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

NKZ1-20 series universal transfer switch can be used in AC 50Hz or 60Hz, voltage 415V and below, DC voltage 220V and below circuits for conversion of electrical control circuits and electrical measuring instruments, such as: electromagnetic coils, electrical measuring instruments, capacitor cabinets, etc., can also be used for direct control ...

Based on the Linux system, the system is stable, efficient and reliable. Industrial-grade high-performance Cortex A8 processor with a clock speed of 600MHz. The COM port integrates RS232/422/485 communication mode. The product provides USB master station and USB slave port, USB slave download port supports 10M/s transmission speed, ...

DZ267LE-32 residual current action circuit breaker (hereinafter referred to as residual current circuit breaker) is mainly suitable for AC 50Hz, rated voltage 230V, rated current to 32A circuit, as a personal electric shock, equipment leakage protection, and overload, short circuit protection function, can also be used in the positive ...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...

SHT-X3H shunt trip device is suitable for AC rated voltage to 400V or DC rated voltage 48V in the line, and NBH-125 series circuit breaker is used together, when the tripper terminal is connected to the rated control voltage, the trip device action and drive the circuit breaker to break automatically, so as to achieve long-distance control breaking.