Kunlun Tongtai touch screen factory reset method

1. After the MCGS screen is connected to the computer (USB connection, network cable connection is acceptable), in the download configuration window, click on the advanced operation, and there is a running environment upgrade button inside, click it, and wait for the upgrade to be completed. 2. In the download configuration window, click to make a U disk comprehensive function treasure, and then ...

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

1) After the above touch calibration is completed, click [Enter Operating System] in the [Startup Properties] dialog box to enter the operating system; 2) Click [Start] --> [Settings] --> [Network & Dial-up Connection]; 3) Double-click [DM9000A] to bring up the corresponding dialog box, ...

What is the reason why the variable cannot be deleted? Use the Usage Count Check command to check variable usage, and then you can delete variables that aren't being used. If a variable cannot be deleted, it means that the variable is in use and cannot be deleted. Is it possible to view the device while it is running?

1. High degree of stability, will not drift due to changes in time and environment 2. Highly adaptable, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no intermediate medium, up to 100% 4. ...

From the perspective of skill principle, the touch screen is a set of clear affirmative coordinate positioning system, first of all, it is necessary to ensure that it is transparent, so it is necessary to deal with the problem of transparency through information technology, such as digitizers, writing boards, elevator switches, they are not touch screens; Secondly it is Ken ...

1 Feature Overview There are two kinds of data saved by MCGS TPC, one is the internal variable data in the MCGS software, and the other is the data obtained from the lower computer device. 2 Functional Points [1] ...

Screen structure: ITO Film and ITO Glass are laminated, and the middle is isolated by a DOT point Outlet cable: FRC copper cable (flat conduction wire) length: 200mm Connection location with touch screen: Withstand tensile force: 2.0 kg horizontal with the screen, 1.0 kg vertical with the screen...

Screen structure: ITO Film is attached to ITO Glass, and is isolated by DOT points in the middle Outlet cable: integrated with the panel Connector: 2.54mm pitch socket, standard AMP87499-9 Touch media: fingers, gloved hands, pens, credit cards, etc ...

The difference between capacitive screen and resistive screen is different in its working principle, touch technology, use environment, cost and life, and then I will explain it to you in detail: How it works Capacitive touch: works by using the body's current induction. When the finger touches on the metal layer ...

(1) Simple operation Just touch the corresponding indication button on the touch screen with your finger to enter the information platform. (2) User-friendly interface Users can operate according to the information and instructions indicated on the screen even if they do not have computer-related expertise. ( 3） ...

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

1 Resistive touch screen - Not afraid of water and dirt - It has the cost advantage of small size, which is suitable for industrial control products and personal portable products - Fear of scratches, low light transmittance, low temperature dullness 2. Surface acoustic touch screen - New and easy to use, suitable for short-term products ...

1. Four-wire resistive screen Features: High resolution, high-speed transmission reaction. Surface hardness treatment to reduce abrasions, scratches and chemical resistance. It has a smooth and matte finish. One correction, high stability, never drift. 2. Five-wire resistive screen Features: High resolution ...

1. Write a program in the PLC, and when a fault occurs, an alarm signal will be output. The corresponding program can be written with a series of PLCs such as S7-200 or S7-1200. 2. Configure the communication protocol between the PLC and the touch screen. Protocols such as MODBUS or OPC can be used to communicate, specifically ...

The user usage system generated by the embedded version of MCGS consists of five parts: the main control window, the equipment window, the user window, the real-time database and the operation strategy. 1. Main control window: the main structure of the use system is structured. Used for ...

Four-wire touch screen The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...

1. Compared with the four-line touch screen, the five-line touch screen has a longer service life and can withstand more than 30 million clicks. The lifespan of a four-wire resistive touch screen is 3 to 4 years, while the average of a five-wire resistive screen can reach 6 years. 2. Once the industrial display of the four-wire touch screen is touched...

First of all, let's take a look at the interface settings of the Kunlun Tongtai touch screen. 1. Click on the device window to enter the Add PLC 2. First add a TCP parent serial port, and add a 5U device below 3. Double-click the TCP parent device to learn the settings, and enter the IP of the touch screen itself...

1. The touch screen is actually called man-machine interface, a man-machine control method that can communicate with the control equipment. Think of it as a collection of button indicator meters. 2. If you want to understand the working principle of the touch screen, you must know how to communicate, we know that a button to control a contactor ...