CHINT/CHINT CJ40 Series AC Contactor CJ40-63

NXRC series contactor relays are mainly used in relay control, signal transmission, isolation amplification and other circuits with AC 50Hz or 60Hz, rated working voltage to 380V and DC rated voltage to 220V, for switching, breaking and amplifying. ● Conform to standards: GB/T 14048.5, IE ...

ND16 series signal light is suitable for indication signals, warning signals, accident signals and other indication signals in telecommunications, electrical and other lines with an AC 50Hz (or 60Hz), rated voltage of 400V and below or DC working voltage of 400V and below. Conform to the standard: GB/T 14048.5. Root...

LAY39 series button is suitable for AC 50Hz or 60Hz, rated working voltage 380V and below or DC working voltage 220V in industrial control circuits, as electromagnetic starters, contactors, relays and other electrical circuit control, with indicator light button is also suitable for light signal ...

● CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching on and off circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

NM2 series plastic shell circuit breaker (hereinafter referred to as circuit breaker) has a rated insulation voltage of 1000V, which is suitable for AC 50Hz, rated working voltage of 400V, rated current of 100A-800A in the low-voltage distribution network, which can be used to distribute electric energy and protect lines and power supply equipment from overload, ...

32-bit high-performance CPU, compiled execution mode, scan cycle is 10 times faster than analytical type, and the basic instruction single-step running time is 0.05μs. Weight: 102 Power consumption: 1.5 Power supply: DC24V±20% Digital inputs: 8 This article introduces the CHINT/CHINT NSC1 series motion controller.

HY23 series instead of HZ3 series combination switch is suitable for AC 50Hz or 60Hz, voltage 380V circuit, as a power supply introduction switch, or as a three-phase squirrel cage induction motor with a control operation frequency of no more than 300 times per hour. Rated voltage: 380 Rated current: 30 Control Electricity ...

NBH-63H miniature circuit breaker is suitable for AC 50Hz, rated voltage 230V/400V, rated current to 63A in the line, for overload and short circuit protection, under normal circumstances, as the line of infrequent operation and conversion, can also be used as a disconnection of the line for line and equipment maintenance of the isolation open...

Rated working voltage (Ue): AC 230V, 50Hz; Overvoltage action setting value (Uo): 280(1±5%)V; Undervoltage action setting value: (35%-70%) Ue; Rated insulation voltage (Ui) : 500V; Trip characteristics: Tripper combined with NXB-63 series circuit breaker ...

The AX-X3H auxiliary contact complies with GB/T 14048.5 standard. It is mainly used in lines with AC rated voltage up to 415V or DC rated voltage up to 130V. Signal indication of long-distance circuit breaker when assembled with NBH-125 series circuit breaker. The auxiliary contact is an accessory product that is assembled in the open circuit ...

YBLX-WL travel switch is mainly used in the control circuit of AC 50Hz or 60Hz, voltage 380V, DC voltage 220V, for the travel control of the moving mechanism, the transformation of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Accord with...

CHINT Xinrui NM5 series plastic case circuit breaker is suitable for AC 50/60Hz, rated voltage AC690V and below, rated current from 16A to 1000A circuits. As the rated current of on, breaking and bearing, it can be overloaded, short-circuited and under-voltage in the line and electrical equipment.

NBHLE-63Y residual current action circuit breaker is suitable for AC 50Hz, rated voltage 230V, rated current to 63A line, play the role of overload, short circuit and leakage protection, can also be used as infrequent line on/off under normal circumstances. The product conforms to IEC61009-1, GB/T 1691 ...

JF5 series base enclosed terminal block is suitable for the frequency of 50Hz or 60Hz, the rated voltage to 660V, the rated cross-sectional area of 1.5-25mm2 round copper wire for connection. This series of products is connected by screw crimping, and the wire end needs to be crimped before it can be connected to the terminal block. ...

NL1-63 residual current action circuit breaker (without overcurrent protection) is suitable for AC 50Hz, rated voltage at two poles 230V, four poles 400V, rated current to 63A line, when the person is electrocuted or the leakage current of the power grid exceeds the specified value, the residual current action circuit breaker can be used in a very short time ...

YBLX-ME series travel switch is suitable for AC 50Hz or 60Hz, voltage 380V, DC voltage 220V control circuit, for the travel control of the moving mechanism, the change of the direction or speed of the movement, the automatic control of the machine tool, the limit action of the moving mechanism and the control of the stroke or program. Symbol...

NB8-40 miniature circuit breaker is mainly suitable for AC 50Hz, rated voltage to 240V, rated current to 40A in commercial office buildings, residential and general industrial use of terminal distribution lines, to provide overload, short circuit protection, but also under normal circumstances to the line infrequent turnover...

Rated current (In): 1A, 2A, 3A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A Rated working voltage (U): 230V-(1P, 1P+N), 400V-(2P-4P, 3P+N); Rated insulation voltage (Ui): 500V; Frequency: 50Hz Electromagnetic tripping ...

LW112 universal transfer switch is mainly suitable for converting electrical control circuits and electrical measuring instruments in circuits with AC 50 or 60Hz, voltage 380V and below, and DC voltage 220V and below. It can also directly control 3-phase AC cage induction motors of 5.5kW and above. Mainly used in meters, micro-electric ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...