CHINT/CHINT NM2 series plastic housing circuit breaker

CHINT/CHINT Terminal Appliance —NXB-125G Miniature Circuit Breaker Rated current (In): 63A, 80A, 100A, 125A (1P, 2P); Rated working voltage (Ue): 230V—— (1P), 400V—— (2P, 3P, 4P); Rated insulation voltage (Ui ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

HZ12 series power cut-off switch is suitable for AC 50Hz or 60Hz, voltage to 550V circuit, as the power supply cut off and on. Comply with standards: GB/T 14048.3, IEC 60947-3. This article introduces the CHINT/CHINT HZ12 series combination switch (power cut-off switch) ...

Rated Operating Voltage (Ue) : AC 230V , 50Hz; Rated insulation voltage (Ui): 500V; Undervoltage action setting value: (35%-70%) Ue; Action characteristics: the external voltage ≤35%Ue, and the product should prevent the circuit breaker from closing; 35%Ue≤ external voltage ...

Introduction: CHINT/CHINT miniature circuit breaker NXB-125G is a new type of leakage circuit breaker integrating leakage relay, leakage circuit breaker, AC contactor, undervoltage and other functions. It can automatically distinguish between slowly variable leakage and abrupt leakage (electric shock) for protection Product parameters ...

DZ20 series plastic shell circuit breaker (hereinafter referred to as circuit breaker), its rated insulation voltage is 660V, AC 50Hz, rated working voltage 380V and below, and its rated current is from 32A to 1250A. Generally used for power distribution, the rated current of type C is 160A and below, and the shell of type 630 and below ...

OVT-X1H overvoltage tripper is suitable for AC 50Hz, rated voltage 230V line, and NBH-63, NBH-40 series circuit breaker matching, when the tripper terminal voltage rises to the voltage protection range, the tripper action and drive the circuit breaker to automatically break, so as to achieve the overvoltage of the line...

NCH8G series household AC contactor (hereinafter referred to as contactor) is mainly suitable for AC 50Hz (or 60Hz), rated working voltage to 400V rated working current to 63A circuit, control household appliances and similar uses of low-inductance and micro-inductance loads; It can also be used to control household ...

OUVR-3 self-resettable over-under-voltage protector is a new type of intelligent protection electrical appliances, the product adopts modular standard design, when the power supply line has overvoltage and undervoltage, the protector can quickly and safely cut off the circuit under the continuous high-voltage impact, so as to avoid abnormal voltage sent to the terminal electrical appliances to cause ...

Introduction: CHINT/CHINT miniature circuit breaker NB8-63 miniature circuit breaker is mainly suitable for AC 50Hz, rated current to 63A in commercial office buildings, residential and general industrial terminal distribution lines, to provide overload, short circuit protection for the line, but also under normal circumstances...

CHINT/CHINT NXBLE-40 residual current action circuit breaker Rated current (In) : 6A, 10A, 16A, 20A, 25A, 32A, 40A; Rated Residual Operating Current (IOn) : 0.01A, 0.03A; . Rated operating voltage (Ue): 230V——; Rated insulated ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz/60Hz, rated working voltage up to 690V (415V for 2P products and NM1-63), rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect line and power supply equipment from overload, short circuit ...

CHINT Xinrui NHM5 series disconnector is suitable for AC 50/60Hz, rated voltage AC690V and below, rated current to 1000A circuit, the product can be operated with load, widely used as an isolation between the load and the power supply, in order to ensure the safety of personnel during equipment maintenance. The product ...

CJ19 series switching capacitor contactor (hereinafter referred to as contactor) is mainly used in power lines with AC 50Hz (or 60Hz) and rated working voltage to 690V, which is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. Contactors with inhibition ...

The NP9 button is suitable for AC 50Hz/60Hz, rated voltage to 230V circuit control system, as a magnetic starter, contactor and other electrical circuit control. The illuminated button is also suitable for various places indicated by light signals. Standards: GB/T 14048.5, IEC 60947-5 ...

The circuit breaker is rated for insulation voltage up to 800V, suitable for AC 50Hz, rated working voltage up to 400V, rated working current from 10A to 250A in the distribution network circuit, used to distribute power and protect lines and power supply equipment from overload, short circuit, undervoltage and other faults. At the same time ...

DZ15 series plastic shell circuit breaker (hereinafter referred to as circuit breaker) is suitable for AC 50Hz, rated voltage of 380V, rated current to 100A circuit, as power distribution, motor overload and short circuit protection, but also as line infrequent conversion and motor infrequent start. ...

CJ40 series AC contactor (hereinafter referred to as contactor) is mainly used for switching and breaking circuits in power systems with AC 50Hz or 60Hz, rated voltage to 660V or 1140V, and current to 1000A.

1.1 System Features: Based on the Linux system, the system is stable, efficient and reliable. Industrial-grade high-performance Cortex A8 processor with a clock speed of 600MHz. The COM port integrates RS232/422/485 communication mode. The product provides USB master station and USB slave port, and the USB slave download port supports 10 ...

CKJ5 series vacuum AC contactor (hereinafter referred to as contactor) is mainly used in AC 50Hz, rated working voltage to 1140V, rated working current to 630A circuit, for long-distance connection and breaking of circuits, and can be used with appropriate thermal overload relay or electronic protection ...