Pilz safety light barriers provide safety for applications that require physical protection

At the SIAF Guangzhou Automation Exhibition, which opened on March 10th, Pilz once again brought new automation solutions to visitors under the concept of "WeAutomate Safely". The exhibition ...

1. The switch binding post is generally marked with L, L1, L2. When the L end enters the line, L1 and L2 have one end and L on, and after pressing the switch, the other end of L1 and L2 is connected to L. 2. Peel the thread with diagonal pliers first, and be careful not to leave too long the thread to avoid touching. 3. To the left ...

Features of the safety door switch: The safety gate switch is composed of two independent parts: the switch body and the operating part of the switch. When the safety door is opened, the switch actuator is pulled out of the switch body and the normally closed contacts in the switch are disconnected by a mechanical rebound device. While...

1. Breaking and closing. Because it has a certain arc extinguishing ability, it can be used to break and close the load current and the overload current of a certain multiple (usually 3-4 times) of the small stem; It can also be used to break and close a no-load transformer with a larger capacity than the disconnector allows, a longer no-load line ...

Generally speaking, the input control voltage of the solid state relay is 3.2-32V. The control current is 5-30mA.Usually the SSR input circuit of 1-2 is not a constant current source circuit, and the input control voltage is 4-16V. The control current is 5-20mA, and the SSR input circuit with the larger rated current is connected to the constant current source ...

　　1. The same module can be triggered by high or low level through different wiring, and the trigger current is not less than 1mA, and the output capacity of the IO port of some 51 single-chip microcomputers is weak, and the circuit of pulling up or increasing the driving capacity is required (the default is low level triggering); 2. Advantages of low-level drive, ...

On March 1, 2023, the National Printing Machinery Standardization Annual Conference and the First National Coating Machine Standardization Annual Conference were held in Yiwu, Zhejiang. The meeting was guided by the Standardization Administration of the People's Republic of China, the China Machinery Industry Federation, and the Yiwu Municipal People's Government.

On fully enclosed rail transit lines, viaducts or tunnels are usually used to avoid the impact of rail lines on the distance, while on non-fully enclosed rail transit lines, the plane intersection between the railway and the distance, that is, level crossings, is more common. In the early stage, rail transit ...

ACMI S.p.A. is an Italy company specializing in high-tech bottling and packaging lines. Based in Fornovo Taro, in the province of Parma, Italy, the company initially produced palletizers and depalletizers for the food and beverage industry, and later specialized in all packaging processes. For...

Luminaire: emits infrared light and is composed of a plurality of light-emitting devices; Light receiver: Receiving infrared light, composed of a number of light receiving devices, one by one corresponding to the light emitting device of the luminaire, forming a protective light curtain, generating shading, light signal, and at the same time transmitting the signal through the signal cable to control...

Have you encountered any of the pain points of these safety relay applications? Since the invention of the first emergency stop safety relay by Pilz in 1987, after twenty or thirty years of development, the current safety relay market can be described as a hundred flowers blooming and a hundred schools of thought contending. Although, the currently selectable security relay ...

From 8 to 10 November 2022, at the SPS trade fair for intelligent production solutions in Nuremberg, Pilz will focus on automation solutions for safety and industrial security in plants and machinery under the theme "Safe and reliable". 　　Safe and cost-effective control ...

On machines with electrosensitive protective devices (e.g. laser scanners or light curtains), safety is ensured by the distance between hazardous movements and electrosensitive protective devices. Where there is intervention/access to the danger zone, there will be no more runaway movements. Overrun is a dangerous movement that stops after a shutdown ...

Pilz safety relays generally consist of an iron core, a coil, an armature, a contact reed, etc. As long as a certain voltage is added to both ends of the coil, a certain current will flow through the coil, resulting in an electromagnetic effect. Under the action of electromagnetic attraction, the armature overcomes the pulling force of the return spring and sucks in the iron ...

With the increasing functional requirements of industrial production, the continuous optimization of process levels and the escalation of the complexity of production conditions, systems that effectively record and manage relevant data are particularly important for machine safety, especially for production safety. PITreader Authorization ...

1. Whether the control voltage of the relay module is consistent with the system voltage. 2. It is still possible to use high level and low level for the level control mode of the relay module. 3. Depending on the requirements, choose whether you need a fully isolated relay module. 4. Safety: Relay ...

1. First of all, press the safety relay overload protection button directly by hand. 2. Secondly, make its contacts recover and be in a closed state. 3. Finally, you need to wait for 3 minutes to be able to proceed, through the adjustment screw, choose a slotted screw, and go deep into the bottom ...

The safety relay disconnects the circuit in use, and at this time, the safety relay is broken, or the safety relay detects unsafe factors and disconnects the circuit, and it is necessary to make an accurate judgment. 1. If there is a potential safety hazard in the circuit, after eliminating the hidden danger, restart the safety relay, ...

(1) Measure the resistance of the contact: use the resistance of the multimeter to measure the resistance of the normally closed contact and the moving point, and the resistance value should be 0; The resistance between the normally open contact and the moving point is infinite. From this, it is possible to distinguish which is a normally closed contact and which is normally open. (2) Coil resistance: multimeter R...

Pilz's modular safety relay myPNOZ has received a lot of attention and acceptance since its introduction. It has been nominated for the Hermes Award, the Germany Innovation Award (GIA) and the Red Dot Design Award. This safety app, which can be customized and mass-produced according to user requirements, can be customized according to user requirements.