Precautions for on-site use of pneumatic butterfly valve - Wuzhong instrument

"Pass" and "position" are important concepts of pneumatic reversing solenoid valves. Different "passes" and "positions" constitute different types of pneumatic reversing solenoid valves. Generally speaking, the "two-position valve" and "three-position valve" refer to the valve core of the reversing valve with two or three different operating directions. The so-called "two links" ...

1. The safety valve should have the equipment to prevent the hammer from moving by itself and the guide frame to limit the lever from deviating, and the spring-type safety valve should have the equipment to raise the handle and prevent the adjustment screws from being twisted at will. 2. It should be installed straight in the pot merchant, the container ...

1. Glander type This is the form that is used a lot. The same form can be different in many details. For example, in terms of hold-down bolts, it can be divided into T-bolts (for low-pressure valves with a pressure of ≤ 16 kg/cm²), stud bolts and loose joints. From the gland point of view, it can be divided into integral and ...

1. The valve core is pressure balanced, even if the large-diameter valve is under the high pressure drop parts, it can also be operated with a smaller actuator. 2. The inner cavity of the valve is straight-through streamlined, which greatly reduces the activity resistance. 3. The concentric movement method of the valve core and the valve body is greatly ...

1. The human element Because of the errors caused by human elements, including misreading, miscalculation and parallax. Misreading often occurs in measuring tools such as vernier rulers and centimeter cards. The vernier scale is likely to misread a small reading, such as 10.02 mm or 9.98 mm at 10.00 mm. Divide...

1. Units and scales (scales) The scale (scale) unit of the temperature gauge is the Celsius temperature (°C). 2. Detect (measure) the penetration length of the element The length of the penetration should be selected in such a way as to insert the detection (test) element ...

(1) The sealing pair is spherical, disc eccentricity rotation planning The valve sealing pair is spherical planning, and the sealing effect is good. Together with the disc rotation center is planned to have a bias with the center of the valve seat, so the valve disc and the valve seat form a bias cam wedge sealing effect when closed, the valve ...

1) General purpose valve (general purpose valve): a general term for a wide range of valves, also known as ordinary valves. It is not a valve for a specific condition and a specific purpose. Although there is no clear definition of a universal valve, it mainly refers to a pressure below 2MPa, ...

In the process control system, the control valve accepts the control signal of the control instrument, directly touches with the fluid, adjusts the flow of the fluid, and controls the flow, pressure, temperature, liquid level and other elements in the system, so it understands the fundamental structure and characteristics of the control valve, and selects it correctly according to the process conditions of the system. ...

Valve is a kind of commonly used hardware products, the valve also has certain technical requirements before assembling and in the process of the device, otherwise the assembled valve may not reflect its own excellent function, what are the technical requirements of the valve in the assembly process? ...

When the gate valve is closed, the sealing surface can only rely on the medium pressure to seal, that is, only rely on the medium pressure to press the sealing surface of the ram to the valve seat on the other side to ensure the sealing of the sealing surface, which is self-sealing. Most gate valves are forcibly sealed, that is, when the valve is closed, it is necessary to rely on external force to forcibly ...

(1) Thread damage due to excessive operation; (2) lack of lubrication or lubricant failure; (3) Stem bending and torsion; (4) The surface finish is not good; (5) Cooperative public service is forbidden and bites too tightly; (6) The stem nut is skewed; (7) Improper selection of information, such as valve stem and ...

Wuzhong is a leading enterprise in China's process industry automatic control valve industry, founded in 1959, a national third-line construction enterprise. The company has always adhered to the concept of professionalism, dedication, innovation and transcendence.

Valve application requirements (1) General gate valves, ball valves, and globe valves are prohibited from regulating according to their structural characteristics. However, in process design, it is widely used for mediation. Due to the conditioning application, the valve seal is in a throttling state for a long time, and the impurities in the oil wash the seal, damaging the seal.

(1) Check whether there is loosening in the multistage pump pipeline and joint. Turn the multistage pump by hand to see if the multistage pump is sensitive. (2) Lubricate the bearing oil in the bearing body, observe the oil level at the center line of the oil standard, and replace or replenish the lubricating oil in time. (3)、 ...

The structure of the adjustable pressure reducing valve is composed of a main valve, a pressure feedback system, and a control pipeline. The main valve is composed of main parts such as valve body, diaphragm seat, valve cover, diaphragm, valve stem, valve plate, etc. The adjustable pressure reducing valve is installed on the one-way water supply pipeline in the city, which can reduce the upstream (inlet) pressure of the higher valve.

The conditioning valve, also known as the control valve, is a device that uses power operation to change the process parameters such as the flow, pressure, temperature, and liquid level of the conditioning pipeline medium in the field of industrial automation process control. It is mainly composed of the operating fulfillment mechanism and the regulating valve body, which receives relevant signals and changes the opening of the valve.

1. Impurities are stuck on the sealing surface of the valve The valve is sometimes closed suddenly, it may be that there are impurities stuck between the sealing surface of the valve, at this time should not be forced to close, the valve should be opened slightly larger, and then try to close, try repeatedly, it can generally be eliminated, otherwise it should be checked again...

From the perspective of product application, hard seal ball valve defects can be roughly divided into the following two categories: non-technical faults and skill defects. The following text mainly introduces the analysis and solution of non-technical problems of hard seal ball valves; ...

Pneumatic butterfly valve additional code: BD insulation butterfly valve, SD telescopic butterfly valve, TLD desulfurization butterfly valve, DH check butterfly valve, DKS fast butterfly valve, FDBD square louver butterfly valve; Butterfly valve code: D indicates butterfly valve Transmission code: manual ...